Continuous-Wave 1.7 μm All-Fiber Gas Raman Laser Source

2021 ◽  
Vol 41 (3) ◽  
pp. 0314001
Author(s):  
李昊 Li Hao ◽  
黄威 Huang Wei ◽  
裴闻喜 Pei Wenxi ◽  
周智越 Zhou Zhiyue ◽  
崔宇龙 Cui Yulong ◽  
...  
2014 ◽  
Vol 988 ◽  
pp. 544-547
Author(s):  
Guang Li

A novel high speed and ultra long-haul radio-over-fiber (ROF) system based on Dual Photoelectric Arms Coherent Modulation (DPACM) and Optical Duo-Binary Coding (ODBC) is proposed, and demonstrated. The signal spectrum bandwidth, generated by ODBC based on the first order DPACM, is half of non-return-to-zero (NRZ ) signal spectrum bandwidth. The secondary order DPACM generates a 40-GHz Millimeter-wave (mm-wave) that is transmitted over fiber (ROF). The simulation results show that, the bit rate can be up to 40 Gbps and the transmission distance is over 1500 Km, based on the ROF system with a 0 dBm continuous-wave laser source, multiple stages Er-Doped Fiber Amplifier (EDFA), a standard single mode fiber (SSMF) with a dispersion of 17 ps/nm/Km and a attenuation of 0.2 dB/Km.


Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 114
Author(s):  
Hui Zhao ◽  
Shibo Dai ◽  
Siqi Zhu ◽  
Hao Yin ◽  
Zhen Li ◽  
...  

In the past few decades, the multifunctional optical crystals for all-solid-state Raman lasers have been widely studied by many scholars due to their compactness, convenience and excellent performance. In this review, we briefly show two kinds of multifunctional Raman crystals: self-Raman (laser and Raman effects) crystals and self-frequency-doubled Raman (frequency-doubling and Raman effects) crystals. We firstly introduce the properties of the self-Raman laser crystals, including vanadate, tungstate, molybdate and silicate doped with rare earth ions, as well as self-frequency-doubled Raman crystals, including KTiOAsO4 (KTA) and BaTeMo2O9 (BTM). Additionally, the domestic and international progress in research on multifunctional Raman crystals is summarized in the continuous wave, passively Q-switched, actively Q-switched and mode-locked regimes. Finally, we present the bottleneck in multifunctional Raman crystals and the outlook for future development. Through this review, we contribute to a general understanding of multifunctional Raman crystals.


2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Jaka Petelin ◽  
Luka Černe ◽  
Jaka Mur ◽  
Vid Agrež ◽  
Jernej Jan Kočica ◽  
...  

Abstract In this manuscript we present a true pulse-on-demand laser design concept using two different approaches. First, we present a fiber master oscillator power amplifier (MOPA) based quasi-continuous wave (CW) laser, working at high modulation bandwidths, for generation of nanosecond pulses. Second, we present a hybrid chirped pulse amplification (CPA)-based laser, combining a chirped-pulse fiber amplifier and an additional solid-state amplifier, for generation of femtosecond pulses. The pulse-on-demand operation is achieved without an external optical modulator/shutter at high-average powers and flexible repetition rates up to 40 MHz, using two variants of the approach for near-constant gain in the amplifier chain. The idler and marker seed sources are combined in the amplifier stages and separated at the out using either wavelength-based separation or second harmonic generation (SHG)-generation-based separation. The nanosecond laser source is further applied to high throughput processing of thin film materials. The laser is combined with a resonant scanner, using the intrinsic pulse-on-demand operation to compensate the scanner’s sinusoidal movement. We applied the setup to processing of indium tin oxide (ITO) and metallic films on flexible substrates.


1998 ◽  
Vol 23 (5) ◽  
pp. 367 ◽  
Author(s):  
J. K. Brasseur ◽  
K. S. Repasky ◽  
J. L. Carlsten
Keyword(s):  

Biomolecules ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 23 ◽  
Author(s):  
Dhawal Choudhary ◽  
Alessandro Mossa ◽  
Milind Jadhav ◽  
Ciro Cecconi

In the past three decades, the ability to optically manipulate biomolecules has spurred a new era of medical and biophysical research. Optical tweezers (OT) have enabled experimenters to trap, sort, and probe cells, as well as discern the structural dynamics of proteins and nucleic acids at single molecule level. The steady improvement in OT’s resolving power has progressively pushed the envelope of their applications; there are, however, some inherent limitations that are prompting researchers to look for alternatives to the conventional techniques. To begin with, OT are restricted by their one-dimensional approach, which makes it difficult to conjure an exhaustive three-dimensional picture of biological systems. The high-intensity trapping laser can damage biological samples, a fact that restricts the feasibility of in vivo applications. Finally, direct manipulation of biological matter at nanometer scale remains a significant challenge for conventional OT. A significant amount of literature has been dedicated in the last 10 years to address the aforementioned shortcomings. Innovations in laser technology and advances in various other spheres of applied physics have been capitalized upon to evolve the next generation OT systems. In this review, we elucidate a few of these developments, with particular focus on their biological applications. The manipulation of nanoscopic objects has been achieved by means of plasmonic optical tweezers (POT), which utilize localized surface plasmons to generate optical traps with enhanced trapping potential, and photonic crystal optical tweezers (PhC OT), which attain the same goal by employing different photonic crystal geometries. Femtosecond optical tweezers (fs OT), constructed by replacing the continuous wave (cw) laser source with a femtosecond laser, promise to greatly reduce the damage to living samples. Finally, one way to transcend the one-dimensional nature of the data gained by OT is to couple them to the other large family of single molecule tools, i.e., fluorescence-based imaging techniques. We discuss the distinct advantages of the aforementioned techniques as well as the alternative experimental perspective they provide in comparison to conventional OT.


2018 ◽  
Vol 7 (4.15) ◽  
pp. 405
Author(s):  
Yousif I. Hammadi ◽  
Tahreer S. Mansour

In this study, an optical frequency comb source (OFCS) based on a dual-drive Mach–Zehnder modulator (MZM) is constructed and theoretically demonstrated. A mathematical model of the constructed OFCS is then built to investigate the effect of the peak-to-peak radio frequency (RF) signals applied to the MZM arms on the generated optical frequency comb (OFC) lines at the MZM output. A dual-drive MZM, a continuous wave laser source, and an RF signal source are included in the OFCS. The chirp parameter can be controlled and 64 comb lines generated at a comb spacing of 25 GHz by regulating voltages applied to the MZM arms. The developed OFCS is relatively simple but valuable. The generated OFC lines can be used for high data-rate transmission.  


Author(s):  
Zefeng Wang ◽  
Wei Huang ◽  
Xiaoming Xi ◽  
Chen Shi ◽  
Wenguang Liu ◽  
...  

2019 ◽  
Vol 28 (8) ◽  
pp. 084210
Author(s):  
Li Fan ◽  
Xiao-Dong Zhao ◽  
Yun-Chuan Zhang ◽  
Xiao-Dong Gu ◽  
Hao-Peng Wan ◽  
...  

Micromachines ◽  
2020 ◽  
Vol 11 (3) ◽  
pp. 330 ◽  
Author(s):  
Maria Antonietta Ferrara ◽  
Luigi Sirleto

Important accomplishments concerning an integrated laser source based on stimulated Raman scattering (SRS) have been achieved in the last two decades in the fields of photonics, microphotonics and nanophotonics. In 2005, the first integrated silicon laser based upon SRS was realized in the nonlinear waveguide. This breakthrough promoted an intense research activity addressed to the realization of integrated Raman sources in photonics microstructures, like microcavities and photonics crystals. In 2012, a giant Raman gain in silicon nanocrystals was measured for the first time. Starting from this impressive result, some promising devices have recently been realized combining nanocrystals and microphotonics structures. Of course, the development of integrated Raman sources has been influenced by the trend of photonics towards the nano-world, which started from the nonlinear waveguide, going through microphotonics structures, and finally coming to nanophotonics. Therefore, in this review, the challenges, achievements and perspectives of an integrated laser source based on SRS in the last two decades are reviewed, side by side with the trend towards nanophotonics. The reported results point out promising perspectives for integrated micro- and/or nano-Raman lasers.


Sign in / Sign up

Export Citation Format

Share Document