scholarly journals Computational Fluid Dynamics Analysis of Rigs-to-Reefs (R2R) Jacket Structures

CFD letters ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 72-83
Author(s):  
Mohd Asamudin A. Rahman ◽  
Muhammad Nadzrin Nazri ◽  
Fatin Alias ◽  
Ahmad Fitriadhy ◽  
Mohd Hairil Mohd
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Oil And Gas ◽  
Artificial Reef ◽  
Flow Characteristics ◽  
Efficiency Index ◽  
Dynamic Responses ◽  
Marine Life ◽  
Computational Fluid Dynamics Analysis ◽  
Jacket Structures

Platform decommissioning activities have been increasing due to unproductive fields and unstable oil prices. One of the decommissioning methods used by the oil and gas companies is by converting the platform into an artificial reef through the rigs-to-reef (R2R) programme. The programme benefits the marine life and increases the marine productions. In this study, the dynamic responses and flow characteristics of jacket platforms were investigated using computational fluid dynamics (CFD) analysis. Three jacket structures with different sizes were used to investigate the suitability of the structure as a potential artificial reef. The pressure exerted on the structure as well as the back eddies and upwelling phenomenon were also investigated. This is to ensure the settlement of the coral larvae and attract marine life to inhabit around the artificial reef. The results show that the platform size and configurations are the significant criteria to design any artificial reef. The pressure on the jacket member is in the acceptable range. Higher efficiency index of back eddy and upwelling could also be obtained by smaller jacket structures.

Computed tomography angiography as an adjunct to computational fluid dynamics for prediction of oxygenator thrombus formation

Perfusion ◽  
2020 ◽  
pp. 026765912094410
Author(s):  
Robert G Conway ◽  
Jiafeng Zhang ◽  
Jean Jeudy ◽  
Charles Evans ◽  
Tieluo Li ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computed Tomography ◽  
Computational Fluid Dynamics ◽  
Computed Tomography Angiography ◽  
Thrombus Formation ◽  
Flow Analysis ◽  
Flow Characteristics ◽  
Region Of Interest ◽  
Computational Fluid Dynamics Analysis ◽  
Clot Burden

Introduction: Extracorporeal membrane oxygenation circuit performance can be compromised by oxygenator thrombosis. Stagnant blood flow in the oxygenator can increase the risk of thrombus formation. To minimize thrombogenic potential, computational fluid dynamics is frequently applied for identification of stagnant flow conditions. We investigate the use of computed tomography angiography to identify flow patterns associated with thrombus formation. Methods: A computed tomography angiography was performed on a Quadrox D oxygenator, and video densitometric parameters associated with flow stagnation were measured from the acquired videos. Computational fluid dynamics analysis of the same oxygenator was performed to establish computational fluid dynamics–based flow characteristics. Forty-one Quadrox D oxygenators were sectioned following completion of clinical use. Section images were analyzed with software to determine oxygenator clot burden. Linear regression was used to correlate clot burden to computed tomography angiography and computational fluid dynamics–based flow characteristics. Results: Clot burden from the explanted oxygenators demonstrated a well-defined pattern, with the largest clot burden at the corner opposite the blood inlet and outlet. The regression model predicted clot burden by region of interest as a function of time to first opacification on computed tomography angiography (R2 = 0.55). The explanted oxygenator clot burden map agreed well with the computed tomography angiography predicted clot burden map. The computational fluid dynamics parameter of residence time, when summed in the Z-direction, was partially predictive of clot burden (R2 = 0.35). Conclusion: In the studied oxygenator, clot burden follows a pattern consistent with clinical observations. Computed tomography angiography–based flow analysis provides a useful adjunct to computational fluid dynamics–based flow analysis in understanding oxygenator thrombus formation.

scholarly journals CFD Analysis of Shrouded Diffuser Wind Turbine

2019 ◽  
Vol 8 (6S3) ◽  
pp. 2100-2104
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbine ◽  
Wind Velocity ◽  
Experimental Testing ◽  
Flow Characteristics ◽  
Operating Conditions ◽  
Computational Fluid Dynamics Analysis ◽  
Cfd Analyses ◽  
Physical Dimensions

The power in the wind is well known to be proportional to the cubic power of the wind velocity approaching a wind turbine. This means that even small amount of its acceleration gives large increase in the power output. Brimmed diffuser shrouds for small wind turbines are being used to accelerate the wind velocity in small wind regimes. The objective of the Paper is to analyze the flow characteristics of brimmed diffuser shroud and to optimize the physical dimensions. CFD analyses are carried out by varying its physical dimensions with the aim of achieving augmented velocity. The effect of flow parameters with the presence of diffuser is analyzed by comparing it with bare wind turbine. The physical dimensions of brimmed diffusers are the parameters considered in this study. The study has been carried with proposed splitted diffuser design. The power yield of the turbine for shifting speeds is gotten and analyzed.The CFD tool CFX would be used to anlayse the flow field around the diffuser. Performance of wind turbine under various operating conditions is generally obtained through an experimental testing and could be cost prohibitive. In this case the computational fluid dynamics analysis provides better results. The capability of using computational fluid dynamics is a test to determine its viability for determining its performance parameters

Modelling water trap seal boundary conditions in building drainage systems: Computational fluid dynamics analysis of unsteady friction to improve accuracy

2017 ◽  
Vol 38 (5) ◽  
pp. 580-601 ◽  
Author(s):  
NJ Jean ◽  
M Gormley
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Method Of Characteristics ◽  
Drainage System ◽  
Air Pressure ◽  
Dynamic Responses ◽  
System Modelling ◽  
Pressure Transients ◽  
Water Trap ◽  
Computational Fluid Dynamics Analysis

The safe removal of disease-carrying human waste is the objective of all sanitation systems and the limiting of air pressure transients within the system remains a significant part of current codes and regulations. The water trap seal offers fundamental protection and is the system’s sole barrier between the public sewer network and habitable space inside a building. Modelling water trap seal responses to air pressure fluctuations offers an opportunity to analyse whole system performance, but the quality of the data depends on the accuracy of the modelling technique and that of the defining inputs. AIRNET, a 1D Method of Characteristics based model, enables rapid whole system testing; however, the present boundary condition for the water trap seal within the model is based solely on steady state conditions, ignoring system dynamics. Computational fluid dynamics offers an opportunity to numerically evaluate the flow patterns within the trap seal in response to applied air pressure transients. This research confirms the importance of the rate of rise, and hence frequency of air pressure transients incident on water trap seals and relates this to potential vulnerabilities of different device geometries, particularly the ratio between inner and outer wall length. The research led to the development of a dynamic velocity decrement model encapsulating unsteady friction and separation losses linked to device geometry for the first time. The development of a frequency-dependent internal energy term Δ v, suitable for inclusion in AIRNET provides the capability to predict more realistic water trap response to air pressure transients over a range of air pressure transient frequencies likely to cause problems: 1 Hz to 8 Hz. Practical application: Whole system modelling can greatly improve the ability of design engineers to fully simulate the operation of a building drainage system in a realistic way. The work described in this paper improves the accuracy of whole system models by evaluating water dynamic responses to air pressure transients using a range of techniques including computational fluid dynamics and more traditional 1D finite difference method of characteristics models. The work also paves the way for more robust evaluation of building drainage products through in-depth investigation of the fluid mechanics associated with their operation.

scholarly journals Rotor profile design and numerical analysis of 2–3 type multiphase twin-screw pumps

2017 ◽  
Vol 232 (2) ◽  
pp. 186-202 ◽  
Author(s):  
Di Yan ◽  
Qian Tang ◽  
Ahmed Kovacevic ◽  
Sham Rane ◽  
Linqing Pei
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
High Performance ◽  
Oil And Gas ◽  
Advantages And Disadvantages ◽  
Rotor Profile ◽  
Computational Fluid Dynamics Analysis ◽  
Performance Curves ◽  
Twin Screw ◽  
Rotor Profiles

Increasing demands for high-performance handling of fluids in oil and gas as well as other applications require improvements of efficiency and reliability of screw pumps. Rotor profile plays the key role in the performance of such machines. This paper analyses difference in performance of 2–3 lobe combination of twin-screw pumps with different rotor profiles. A-type profile formed of involute–cycloid curves and D-type formed of cycloid curves are typical representatives for 2–3 type screw pumps. The investigation is performed by use of a full 3-D computational fluid dynamics analysis based on a single-domain structured moving mesh obtained by novel grid generation procedure. The real-time mass flow rate, rotor torque, pressure distribution and velocity field were obtained from 3D computational fluid dynamics calculations. The performance curves were produced for variable rotation speeds and variable discharge pressures. The computational fluid dynamics model was validated by comparing the simulation results of the A-type pump with the experimental data. In order to get the performance characteristics of D-type profile, two rotors with D-type profile were designed. The first has the same displacement volume as A-type while the second has the same lead and rotor length as A-type but different displacement volume. The comparison of results obtained with two rotor profiles gave an insight on the advantages and disadvantages of each of them.

Sign in / Sign up

Export Citation Format

Share Document