scholarly journals MODELLING THE SIZE OF SEASONAL THERMAL STORAGE IN THE SOLAR DISTRICT HEATING SYSTEM / SEZONINĖS ŠILUMOS AKUMULIACINĖS TALPYKLOS TŪRIO MODELIAVIMAS CENTRALIZUOTOJE SAULĖS ŠILDYMO SISTEMOJE

2012 ◽  
Vol 5 (4) ◽  
pp. 499-506
Author(s):  
Giedrė Streckienė ◽  
Salomėja Bagdonaitė
Keyword(s):  
Storage System ◽  
Boiler House ◽  
Thermal Storage ◽  
Heating System ◽  
Solar Heating ◽  
System Modelling ◽  
Solar Thermal Energy ◽  
District Heating System ◽  
Climate Conditions ◽  
Heat Demand

The integration of a thermal storage system into the solar heating system enables to increase the use of solar thermal energy in buildings and allows avoiding the mismatch between consumers’ demand and heat production in time. The paper presents modelling a seasonal thermal storage tank various sizes of which have been analyzed in the district solar heating system that could cover a part of heat demand for the district of individual houses in Vilnius. A biomass boiler house, as an additional heat source, should allow covering the remaining heat demand. energyPRO software is used for system modelling. The paper evaluates heat demand, climate conditions and technical characteristics. Santrauka Šilumos akumuliavimo sistemos integracija į saulės šildymo sistemą suteikia galimybę padidinti Saulės šiluminės energijos panaudojimą pastatuose, nes tai leidžia išvengti vartotojų poreikio ir šilumos gamybos nesutapimo laike. Šiame darbe modeliuojama sezoninė šilumos akumuliacinė talpykla, analizuojami įvairūs jos dydžiai centralizuotoje saulės šildymo sistemoje. Nagrinėjama sistema galėtų užtikrinti dalį individualių namų mikrorajono, esančio Vilniuje, šilumos poreikių. Kaip papildomas šilumos šaltinis modeliuojama biokuro katilinė, kuri leistų užtikrinti likusią šilumos poreikių dalį. Modeliavimas atliekamas energyPRO programa įvertinant pastatų poreikius, klimatines sąlygas ir technologines įrenginių charakteristikas.

scholarly journals Excess heat utilization combined with thermal storage integration in district heating systems using renewables

2020 ◽  
Vol 24 (6 Part A) ◽  
pp. 3673-3684
Author(s):  
Borna Doracic ◽  
Marino Grozdek ◽  
Tomislav Puksec ◽  
Neven Duic
Keyword(s):  
Service Sector ◽  
Peak Load ◽  
District Heating ◽  
Thermal Storage ◽  
Heating System ◽  
District Heating System ◽  
Heating Systems ◽  
Excess Heat ◽  
Heat Demand ◽  
District Heating Systems

District heating systems already play an important role in increasing the sustainability of the heating sector and decreasing its environmental impact. However, a high share of these systems is old and inefficient and therefore needs to change towards the 4th generation district heating, which will incorporate various energy sources, including renewables and excess heat of different origins. Especially excess heat from industrial and service sector facilities is an interesting source since its potential has already been proven to be highly significant, with some researches showing that it could cover the heat demand of the entire residential and service sector in Europe. However, most analyses of its utilisation in district heating are not done on the hourly level, therefore not taking into account the variability of its availability. For that reason, the main goal of this work was to analyse the integration of industrial excess heat into the district heating system consisting of different configurations, including the zero fuel cost technologies like solar thermal. Furthermore, cogeneration units were a part of every simulated configuration, providing the link to the power sector. Excess heat was shown to decrease the operation of peak load boiler and cogeneration, that way decreasing the costs and environmental effect of the system. However, since its hourly availability differs from the heat demand, thermal storage needs to be implemented in order to increase the utilisation of this source. The analysis was performed on the hourly level in the energyPRO software

scholarly journals Techno-economic analysis of implementing thermal storage for peak load shaving in a campus district heating system with waste heat from the data centre

2021 ◽  
Vol 246 ◽  
pp. 09003
Author(s):  
Haoran Li ◽  
Juan Hou ◽  
Yuemin Ding ◽  
Natasa Nord
Keyword(s):  
Waste Heat ◽  
Peak Load ◽  
District Heating ◽  
Thermal Storage ◽  
Heating System ◽  
Water Tank ◽  
District Heating System ◽  
Heating Systems ◽  
Heat Demand ◽  
District Heating Systems

Peak load has significant impacts on the economic and environmental performance of district heating systems. Future sustainable district heating systems will integrate thermal storages and renewables to shave their peak heat demand from traditional heat sources. This article analysed the techno-economic potential of implementing thermal storage for peak load shaving, especially for the district heating systems with waste heat recovery. A campus district heating system in Norway was chosen as the case study. The system takes advantage of the waste heat from the campus data centre. Currently, about 20% of the heating bill is paid for the peak load, and a mismatch between the available waste heat and heat demand was detected. The results showed that introducing water tank thermal storage brought significant effects on peak load shaving and waste heat recovery. Those effects saved up to 112 000 EUR heating bills annually, and the heating bill paid for the peak load could be reduced by 15%. Meanwhile, with the optimal sizing and operation, the payback period of the water tank could be decreased to 13 years. Findings from this study might help the heat users to evaluate the economic feasibility of introducing thermal storage.

scholarly journals ENERGY AND EMISSION ANALYSES OF A SOLAR ENERGY BASED DISTRICT HEATING SYSTEM

2020 ◽  
Vol 10 (1) ◽  
pp. 18-22
Author(s):  
Cristina CALIN ◽  
Eugen Victor RUSU ◽  
Ion ION ◽  
Gabriel MOCANU
Keyword(s):  
System Integration ◽  
Heat Storage ◽  
District Heating ◽  
Heating System ◽  
Solar Heating ◽  
Total System ◽  
District Heating System ◽  
Heat Demand ◽  
Seasonal Heat ◽  
Multifamily Buildings

The energy, economic and environmental analysis of a solar heating system with seasonal heat storage integrated into a district heating system based on natural gas boiler was performed. The solar collector field has a surface area of 8720 m2 and the pit seasonal heat storage has a volume of 10000 m3. This system covers 79% of the total yearly heat demand of the 15 multifamily buildings with 1500 inhabitants. The total system investment cost (2974100 €) may be recovered in about 17 years. The environmental impact of solar heating system integration is the decrease of CO2 emission by 79%.

Experience With a Solar Heating ATES System for a University Building

1994 ◽  
Vol 116 (2) ◽  
pp. 88-93 ◽  
Author(s):  
E. Hahne ◽  
M. Hornberger
Keyword(s):  
Solar Energy ◽  
Heat Pump ◽  
Waste Heat ◽  
Heating System ◽  
Solar Heating ◽  
Coefficient Of Performance ◽  
Solar Collectors ◽  
Power Station ◽  
Heat Demand ◽  
Heat Store

At Stuttgart University, a solar heating system for an office building with laboratories and lecture rooms was installed in 1985. It consists of 211 m2 of unglazed solar collectors, a 1050 m3 water-flooded pebble bed heat store, and a heat pump. Heat can be supplied to the store from the solar collectors or from a power station (as waste heat). The whole system has worked successfully for five years under varied strategies. In the first two heating periods, the heating strategy was aimed to collect as much solar energy as possible. Thus, about 60 percent of the heat demand could be covered by solar energy; but the yearly heat pump coefficient of performance (COP) was only around 2.76. With an improved heat pump, a monthly COP of 3.6 was obtained. Heat losses from the storage amounted to about 20 percent.

scholarly journals Co-generation: Increasing energy efficiency in Bosnia and Herzegovina

2007 ◽  
Vol 11 (3) ◽  
pp. 85-100
Author(s):  
Alija Lekic ◽  
Semsudin Hadziefendic
Keyword(s):  
Bosnia And Herzegovina ◽  
Low Voltage ◽  
Boiler House ◽  
District Heating ◽  
Electrical Energy ◽  
Heating System ◽  
District Heating System ◽  
The Government ◽  
Electrical Distribution Network ◽  
The City

The main sources for power generation in Bosnia and Herzegovina are domestic coals, mainly lignite and brown coals, which are relatively characterized with a high content of sulphur (3-5%) and incombustibles (?30%). From the 70?s, use of this type of fuels was not allowed in the city of Sarajevo due to very unfavorable emissions to the atmosphere, during the heating period, and since then Sarajevo has been supplied with natural gas. All the heating installations in the city were reconstructed and adapted. The district heating system Toplane Sarajevo is supplied with electrical energy from the Public electrical distribution network (Elektrodistribucija Sarajevo) at low voltage (0.4 kV). The boiler-house Dobrinja III-2 (KDIII-2), from the district heating system of Sarajevo Suburb Dobrinja, which was not in use after the war 1992-1995, had a lot of advantages for the reconstruction into the co-generation plant. The Government of Canton Sarajevo financially supported this proposal. An analysis of co-generations for the district heating system and a selection of most appropriate co-generation systems were made. In the proposed conceptual design, the co-generation KDIII-2 was located in the existing boiler-house KDIII-2, connected with the heating system in Dobrinja. The operating costs of production of electricity and heat were evaluated in the study and compared with the costs of conventional energy supply to the district heating system. This analysis resulted in economic indicators, which showed that this investment was economically viable, and it also determined the payback period of the investment. In this paper results of the mentioned study and an overview of co-generation in Bosnia and Herzegovina are presented.

Sign in / Sign up

Export Citation Format

Share Document