scholarly journals Performance analysis of a low-cost current-source 1-ph grid-connected PV inverter

2015 ◽  
Vol 23 ◽  
pp. 1981-1995 ◽  
Author(s):  
Gürhan ERTAŞGIN ◽  
Wen Liang SOONG ◽  
Nesimi ERTUGRUL
Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4675
Author(s):  
Ayat-allah Bouramdane ◽  
Alexis Tantet ◽  
Philippe Drobinski

In this study, we examine how Battery Storage (BES) and Thermal Storage (TES) combined with solar Photovoltaic (PV) and Concentrated Solar Power (CSP) technologies with an increased storage duration and rental cost together with diversification would influence the Moroccan mix and to what extent the variability (i.e., adequacy risk) can be reduced; this is done using recent (2013) cost data and under various penetration scenarios. To do this, we use MERRA-2 climate reanalysis to simulate hourly demand and capacity factors (CFs) of wind, solar PV and CSP without and with increasing storage capabilities—as defined by the CSP Solar Multiple (SM) and PV Inverter Loading Ratio (ILR). We adjust these time series to observations for the four Moroccan electrical zones over the year 2018. Our objective is to maximize the renewable (RE) penetration and minimize the imbalances between RE production and consumption considering three optimization strategies. We analyze mixes along Pareto fronts using the Mean-Variance Portfolio approach—implemented in the E4CLIM model—in which we add a maximum-cost constraint to take into account the different rental costs of wind, PV and CSP. We propose a method to calculate the rental cost of storage and production technologies taking into account the constraints on storage associated with the increase of SM and ILR in the added PV-BES and CSP-TES modules, keeping the mean solar CFs fixed. We perform some load bands-reduction diagnostics to assess the reliability benefits provided by each RE technology. We find that, at low penetrations, the maximum-cost budget is not reached because a small capacity is needed. The higher the ILR for PV, the larger the share of PV in the mix compared to wind and CSP without storage is removed completely. Between PV-BES and CSP-TES, the latter is preferred as it has larger storage capacity and thus stronger impact in reducing the adequacy risk. As additional BES are installed, more than TES, PV-BES is favored. At high penetrations, optimal mixes are impacted by cost, the more so as CSP (resp., PV) with high SM (resp., ILR) are installed. Wind is preferably installed due to its high mean CF compared to cost, followed by either PV-BES or CSP/CSP-TES. Scenarios without or with medium storage capacity favor CSP/CSP-TES, while high storage duration scenarios are dominated by low-cost PV-BES. However, scenarios ignoring the storage cost and constraints provide more weight to PV-BES whatever the penetration level. We also show that significant reduction of RE variability can only be achieved through geographical diversification. Technological complementarity may only help to reduce the variance when PV and CSP are both installed without or with a small amount of storage. However, the diversification effect is slightly smaller when the SM and ILR are increased and the covariances are reduced as well since mixes become less diversified.


Author(s):  
Omar Arafat ◽  
Mark A Gregory

Femtocells are considered one of the ultimate solutions for the ever increasing demand in LTE-Advance. Recently, wireless industries have resorted to femtocell networks in order to enhance indoor coverage and quality of service since macro-antennas fail to reach these objectives. In enabling indoor home or enterprise users with mobile broadband solutions, role of femtocells are crucially important. While considering low cost solutions for higher coverage and data rate, femtocells apparently have one of the best potentials for indoor users. Due to the dense self-deployment of femtocells in a limited area, serious inter-femtocell interference (IFI) may cause, which consequently results in severe performance degradation. To mitigate the IFI and utilize spectrum resource more efficiently, this paper proposes a cluster based femtocell deployments along with a capacity based cognitive resource allocation scheme .Three different channel configurations in a hybrid access femtocell network are considered for performance analysis. The results of a performance analysis of the cluster based femtocell configurations in a priority based users’ network are presented.


2017 ◽  
Author(s):  
Farhana Nasrin Akter ◽  
Muhammed Kamrul Islam ◽  
Nurun Nahar Begum

2014 ◽  
Vol 945-949 ◽  
pp. 1924-1931
Author(s):  
Hai Qing Yao ◽  
Heng Cao ◽  
Fei Jiang ◽  
Bo Sun

Based on the excellent performance of Pt100, a portable low-cost precision temperature sensor has been designed, whose core chips are REF03, AD8603, AD7788 and precision resistors. Constant current source (CCS) for 4-wire Pt100 is constituted by REF03, AD8603 and precision resistors. AD7788 measures the differential signal on Pt100 and suppresses the common mode interference signal. Analysis software running on the micro control unit (MCU) filters the digital code from AD7788, and then calculates the current temperature value according to the resistance-temperature mathematical model of Pt100. Analysis and experimental results show that the temperature measurement accuracy of the sensor can reach ±1°C within the range of 0°C-650°C.


Sign in / Sign up

Export Citation Format

Share Document