scholarly journals Leaching of Heavy Metals from Fly Ash Generated from Gasification and Melting Furnace for Municipal Solid Wastes by Organic Acids

2007 ◽  
Vol 18 (3) ◽  
pp. 157-166 ◽  
Author(s):  
Chie Saito ◽  
Haruki Okada ◽  
Monica Joy Titus ◽  
Toshiaki Yoshioka ◽  
Tadaaki Mizoguchi
1997 ◽  
Vol 35 (8) ◽  
pp. 231-238 ◽  
Author(s):  
Tay Joo Hwa ◽  
S. Jeyaseelan

Conditioning of sludges improves dewatering characteristics and reduces the quantity of sludge to be handled. Anaerobic digested sludge collected from a sewage treatment plant contained 1.8% to 8% oil. The increase of specific resistance and capillary suction time (CST) with increasing oil content observed in these samples indicates the interference of oil in dewatering. It has been found that addition of municipal solid wastes incinerator fly ash decreases the specific resistances and capillary suction times of oily sludges rapidly up to 3% dosage. Beyond 3% fly ash, the decrease is less significant and the solids content in the sludge cake increases. This optimum dosage remains the same for sludges with varying oil contents from 1.8% to 12%. The total suspended solids of filtrate decreases with fly ash dosage but the toxic concentrations of heavy metals increases considerably. However at the optimum dosage of 3%, concentrations of heavy metals are within the limits for discharging into the sewers. The correlations of CST with the dewatering characteristics such as specific resistance, filter yield and corrected filter yield are established. These correlations can be used to obtain a quick prediction on dewaterability.


Soil Systems ◽  
2020 ◽  
Vol 4 (2) ◽  
pp. 34
Author(s):  
Despina Vamvuka ◽  
Stelios Alexandrakis ◽  
George Alevizos ◽  
Antonios Stratakis

In the context of the current environmental policies of the European Union promoting the recycling and reuse of waste materials, this work aimed at investigating the environmental impact of ashes produced from the co-combustion of municipal solid wastes with olive kernel in a fixed bed unit. Lignite fly ash, silica fume, wheat straw ash, meat and bone meal biochar, and mixtures of them were used as stabilizing ash materials. All solids were characterized by physical, chemical and mineralogical analyses. Column leaching tests of unstabilized and stabilized ash through a quarzitic soil were conducted, simulating field conditions. pH, electrical conductivity, chloride, sulphate and phosphate ions, major and trace elements in the leachates were measured. The results showed that alkaline compounds were partially dissolved in water extracts, increasing their pH and thus decreasing the leachability of heavy metals from the ash. Cr leached from unstabilized ash reached a hazardous level. Upon the stabilization of ash, the concentrations of heavy metals in the extracts were reduced between 9% and 100%, and were below legislation limits for disposal, apart from Cr. The latter was achieved only when meat and bone meal biochar was used as stabilizer. Entrapment of ash elements was assigned to the amorphous silica and to the phosphates of the stabilizing materials, as well as complexed silicates formed during the process.


2003 ◽  
Vol 49 (2) ◽  
pp. 163-170 ◽  
Author(s):  
A Mitra ◽  
P Bhattacharyya ◽  
K Chakrabarti ◽  
DJ Chattopadhyay ◽  
A Chakraborty

2019 ◽  
Vol 11 ◽  
pp. 100215 ◽  
Author(s):  
Joseph P. Essien ◽  
Edu D. Inam ◽  
Donald I. Ikpe ◽  
Godwin E. Udofia ◽  
Nsikak U. Benson

Sign in / Sign up

Export Citation Format

Share Document