Full Waveform Inversion in the Western Canadian Basin: From Near Surface to Deep

2019 ◽  
Author(s):  
G. Matharu ◽  
M.A.H. Zuberi ◽  
M. Sacchi
Keyword(s):  
Waveform Inversion ◽  
Full Waveform Inversion ◽  
Near Surface ◽  
Full Waveform ◽  
Canadian Basin

FULL-WAVEFORM INVERSION WITH SOURCE AND RECEIVER COUPLING EFFECTS CORRECTION

Geophysics ◽  
2021 ◽  
pp. 1-37
Author(s):  
Xinhai Hu ◽  
Wei Guoqi ◽  
Jianyong Song ◽  
Zhifang Yang ◽  
Minghui Lu ◽  
...  
Keyword(s):  
Waveform Inversion ◽  
Nonlinear Least Squares ◽  
Real Data ◽  
Model Parameters ◽  
Full Waveform Inversion ◽  
Linear Inversion ◽  
Near Surface ◽  
Model Parameter ◽  
Full Waveform ◽  
Coupling Factors

Coupling factors of sources and receivers vary dramatically due to the strong heterogeneity of near surface, which are as important as the model parameters for the inversion success. We propose a full waveform inversion (FWI) scheme that corrects for variable coupling factors while updating the model parameter. A linear inversion is embedded into the scheme to estimate the source and receiver factors and compute the amplitude weights according to the acquisition geometry. After the weights are introduced in the objective function, the inversion falls into the category of separable nonlinear least-squares problems. Hence, we could use the variable projection technique widely used in source estimation problem to invert the model parameter without the knowledge of source and receiver factors. The efficacy of the inversion scheme is demonstrated with two synthetic examples and one real data test.

Tunnel detection at Yuma Proving Ground, Arizona, USA — Part 1: 2D full-waveform inversion experiment

Geophysics ◽  
2019 ◽  
Vol 84 (1) ◽  
pp. B95-B105 ◽  
Author(s):  
Yao Wang ◽  
Richard D. Miller ◽  
Shelby L. Peterie ◽  
Steven D. Sloan ◽  
Mark L. Moran ◽  
...  
Keyword(s):  
Surface Wave ◽  
Waveform Inversion ◽  
Velocity Profiles ◽  
Infinite Length ◽  
Full Waveform Inversion ◽  
S Wave ◽  
Near Surface ◽  
Tunnel Detection ◽  
Full Waveform ◽  
Wave Methods

We have applied time domain 2D full-waveform inversion (FWI) to detect a known 10 m deep wood-framed tunnel at Yuma Proving Ground, Arizona. The acquired seismic data consist of a series of 2D survey lines that are perpendicular to the long axis of the tunnel. With the use of an initial model estimated from surface wave methods, a void-detection-oriented FWI workflow was applied. A straightforward [Formula: see text] quotient masking method was used to reduce the inversion artifacts and improve confidence in identifying anomalies that possess a high [Formula: see text] ratio. Using near-surface FWI, [Formula: see text] and [Formula: see text] velocity profiles were obtained with void anomalies that are easily interpreted. The inverted velocity profiles depict the tunnel as a low-velocity anomaly at the correct location and depth. A comparison of the observed and simulated waveforms demonstrates the reliability of inverted models. Because the known tunnel has a uniform shape and for our purposes an infinite length, we apply 1D interpolation to the inverted [Formula: see text] profiles to generate a pseudo 3D (2.5D) volume. Based on this research, we conclude the following: (1) FWI is effective in near-surface tunnel detection when high resolution is necessary. (2) Surface-wave methods can provide accurate initial S-wave velocity [Formula: see text] models for near-surface 2D FWI.

A focusing study of near-surface full-waveform inversion based on wave-mode separation

2017 ◽  
Author(s):  
Yao Wang ◽  
Richard Miller ◽  
Shelby Peterie ◽  
Steven Sloan ◽  
Mark Moran ◽  
...  
Keyword(s):  
Waveform Inversion ◽  
Wave Mode ◽  
Full Waveform Inversion ◽  
Near Surface ◽  
Full Waveform ◽  
Mode Separation

3D elastic full-waveform inversion of surface waves in the presence of irregular topography using an envelope-based misfit function

Geophysics ◽  
2018 ◽  
Vol 83 (1) ◽  
pp. R1-R11 ◽  
Author(s):  
Dmitry Borisov ◽  
Ryan Modrak ◽  
Fuchun Gao ◽  
Jeroen Tromp
Keyword(s):  
Surface Wave ◽  
Objective Function ◽  
Surface Waves ◽  
Large Scale ◽  
Body Wave ◽  
Waveform Inversion ◽  
Full Waveform Inversion ◽  
S Wave ◽  
Near Surface ◽  
Full Waveform

Full-waveform inversion (FWI) is a powerful method for estimating the earth’s material properties. We demonstrate that surface-wave-driven FWI is well-suited to recovering near-surface structures and effective at providing S-wave speed starting models for use in conventional body-wave FWI. Using a synthetic example based on the SEG Advanced Modeling phase II foothills model, we started with an envelope-based objective function to invert for shallow large-scale heterogeneities. Then we used a waveform-difference objective function to obtain a higher-resolution model. To accurately model surface waves in the presence of complex tomography, we used a spectral-element wave-propagation solver. Envelope misfit functions are found to be effective at minimizing cycle-skipping issues in surface-wave inversions, and surface waves themselves are found to be useful for constraining complex near-surface features.

Full waveform inversion: early start of model building process to resolve the complex near surface model in the Exmouth sub-basin, North West Shelf Australia

2018 ◽  
Vol 58 (2) ◽  
pp. 884
Author(s):  
Lianping Zhang ◽  
Haryo Trihutomo ◽  
Yuelian Gong ◽  
Bee Jik Lim ◽  
Alexander Karvelas
Keyword(s):  
Model Building ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Surface Velocity ◽  
Image Point ◽  
Surface Model ◽  
Full Waveform Inversion ◽  
Near Surface ◽  
North West ◽  
Full Waveform

The Schlumberger Multiclient Exmouth 3D survey was acquired over the Exmouth sub-basin, North West Shelf Australia and covers 12 600 km2. One of the primary objectives of this survey was to produce a wide coverage of high quality imaging with advanced processing technology within an agreed turnaround time. The complexity of the overburden was one of the imaging challenges that impacted the structuration and image quality at the reservoir level. Unlike traditional full-waveform inversion (FWI) workflow, here, FWI was introduced early in the workflow in parallel with acquisition and preprocessing to produce a reliable near surface velocity model from a smooth starting model. FWI derived an accurate and detailed near surface model, which subsequently benefitted the common image point (CIP) tomography model updates through to the deeper intervals. The objective was to complete the FWI model update for the overburden concurrently with the demultiple stages hence reflection time CIP tomography could start with a reasonably good velocity model upon completion of the demultiple process.

scholarly journals 3-D time-domain Gauss–Newton full waveform inversion for near-surface site characterization

2019 ◽  
Vol 217 (1) ◽  
pp. 206-218 ◽  
Author(s):  
Khiem T Tran ◽  
Majid Mirzanejad ◽  
Michael McVay ◽  
David Horhota
Keyword(s):  
Time Domain ◽  
Waveform Inversion ◽  
Site Characterization ◽  
Full Waveform Inversion ◽  
Surface Site ◽  
Near Surface ◽  
Full Waveform

Near-surface full-waveform inversion in a transmission surface-consistent scheme

Geophysics ◽  
2020 ◽  
pp. 1-57
Author(s):  
Daniele Colombo ◽  
Ernesto Sandoval ◽  
Diego Rovetta ◽  
Apostolos Kontakis
Keyword(s):  
High Resolution ◽  
Seismic Data ◽  
Waveform Inversion ◽  
Surface Velocity ◽  
Full Waveform Inversion ◽  
Velocity Mapping ◽  
Signal To Noise ◽  
Near Surface ◽  
Velocity Modeling ◽  
Full Waveform

Land seismic velocity modeling is a difficult task largely related to the description of the near surface complexities. Full waveform inversion is the method of choice for achieving high-resolution velocity mapping but its application to land seismic data faces difficulties related to complex physics, unknown and spatially varying source signatures, and low signal-to-noise ratio in the data. Large parameter variations occur in the near surface at various scales causing severe kinematic and dynamic distortions of the recorded wavefield. Some of the parameters can be incorporated in the inversion model while others, due to sub-resolution dimensions or unmodeled physics, need to be corrected through data preconditioning; a topic not well described for land data full waveform inversion applications. We have developed novel algorithms and workflows for surface-consistent data preconditioning utilizing the transmitted portion of the wavefield, signal-to-noise enhancement by generation of CMP-based virtual super shot gathers, and robust 1.5D Laplace-Fourier full waveform inversion. Our surface-consistent scheme solves residual kinematic corrections and amplitude anomalies via scalar compensation or deconvolution of the near surface response. Signal-to-noise enhancement is obtained through the statistical evaluation of volumetric prestack responses at the CMP position, or virtual super (shot) gathers. These are inverted via a novel 1.5D acoustic Laplace-Fourier full waveform inversion scheme using the Helmholtz wave equation and Hankel domain forward modeling. Inversion is performed with nonlinear conjugate gradients. The method is applied to a complex structure-controlled wadi area exhibiting faults, dissolution, collapse, and subsidence where the high resolution FWI velocity modeling helps clarifying the geological interpretation. The developed algorithms and automated workflows provide an effective solution for massive full waveform inversion of land seismic data that can be embedded in typical near surface velocity analysis procedures.

Sign in / Sign up

Export Citation Format

Share Document