Approaches and Applications of Virtual Reality and Gesture Recognition

2018 ◽  
pp. 180-199
Author(s):  
Sudha M. R. ◽  
Sriraghav K. ◽  
Sudar Abisheck S. ◽  
Shomona Gracia Jacob ◽  
Manisha S.

Interaction with a computer has been the center of innovation ever since the advent of input devices. From simple punch cards to keyboards, there are number of novel ways of interaction with computers which influence the user experience. Communicating using gestures is perhaps one of the most natural ways of interaction. Gesture recognition as a tool for interpreting signs constitutes a pivotal area in gesture recognition research where accuracy of the algorithm and the ease of usability determine the effectiveness of the algorithm or system. Introducing gesture based interaction in Virtual reality applications has not only helped solve problems which were commonly reported in traditional Virtual Reality systems, but also gives user a more natural and enriching experience. This paper concentrates on comparison of different systems and identifying their similarities, differences, advantages and demerits which can play a key role in designing a system using such technologies.

Author(s):  
Sudha M R ◽  
Sriraghav K ◽  
Sudar Abisheck S ◽  
Shomona Gracia Jacob ◽  
Manisha S

Interaction with a computer has been the center of innovation ever since the advent of input devices. From simple punch cards to keyboards, there are number of novel ways of interaction with computers which influence the user experience. Communicating using gestures is perhaps one of the most natural ways of interaction. Gesture recognition as a tool for interpreting signs constitutes a pivotal area in gesture recognition research where accuracy of the algorithm and the ease of usability determine the effectiveness of the algorithm or system. Introducing gesture based interaction in Virtual reality applications has not only helped solve problems which were commonly reported in traditional Virtual Reality systems, but also gives user a more natural and enriching experience. This paper concentrates on comparison of different systems and identifying their similarities, differences, advantages and demerits which can play a key role in designing a system using such technologies.


Author(s):  
Yong Min Kim ◽  
Ilsun Rhiu ◽  
Minshik Rhie ◽  
Hye Seon Choi ◽  
Myung Hwan Yun

Virtual reality (VR) is receiving enough attention to be regarded as a revival era and technologies related to the implementation of VR systems continue to evolve. VR systems are applied not only in entertainment but also in various fields such as medicine, rehabilitation, education, engineering, and military (Aïm, Lonjon, Hannouche, & Nizard, 2016; Howard, 2017; Lele, 2013). In particular, low-cost and immersive VR systems are commercialized to the general public, accelerating the revival of VR (Wang & Lindeman, 2015). In VR system, the research from the viewpoint of human–computer interaction and user experience (UX) is required to provide a high sense of immersion to the user. Therefore, the purpose of this study is to provide a structural methodology for classifying current VR researches and to review UX evaluation of VR systems systematically to identify research trends and to clarify future research directions. This study followed systematic review protocol of (PRISMA) (Liberati et al., 2009). To cover a broad spectrum of perspectives of engineering and medical fields, six web databases were selected: Scopus, Web of Science, Science direct, IEEE Xplore, EBSCO, and ProQuest. The main search keywords were virtual reality and user experience. These two words can be used in acronyms or other words. As a result, four and three words were chosen for virtual reality and user experience, respectively (‘virtual reality’, ‘virtual environment’, ‘VR,’ and ‘VE’ were chosen as keywords for virtual reality, ‘user experience’, ‘UX,’ and ‘human experience’). In addition, the journal articles in English were searched only. After the screening process was completed, final articles were selected based on the full-text. In this process, there were two essential selection conditions. The selected articles should use VR system and evaluate UX component. No restrictions other than these conditions were made. As a result, 78 articles were found to be consistent with the purpose of this study. As a result, there were two main points of discussion about UX studies in a VR system. The first is related to the implementation of equipment and technology including input devices, output devices, feedback forms, platforms, and applications. The other is related to research methods including user characteristics, interactions, and evaluation method. With respect to hand input devices, conventional input devices such as keyboards and game pads were used in many cases compared to trackable devices. However, as implementation techniques for natural interaction such as gesture recognition or real-time tracking of the body parts have been extensively developed, UX research needs to be conducted on VR systems that apply these techniques. In relation to feedback, stimuli other than visual stimuli were not frequently provided. Since providing multiple types of stimuli simultaneously may increase the user’s immersion and sense of reality, it is necessary to intensively study the effect of multi-sensory feedback in the future. In addition, there is a lack of academic research on CAVE and motion platforms. Though CAVE and motion platforms are difficult to set up for experimentation because they are expensive to build and require large space, there is a need to continually expand the UX research on this platform since the public will have more opportunities to access these platforms. Regarding research methods, most of the studies have focused on subjective measurements, quantitative research, laboratory experiments, and episode UX. To comprehensively understand the overall UX, it is necessary to conduct a qualitative study such as observation of subjects experiencing a VR system, think aloud, or deep interview with them, rather than evaluating UX only through a questionnaire. In addition, there was no case in which UX was evaluated in terms of momentary UX. However, there is a limit to evaluating the subjective measurement such as immersion, presence, and motion sickness during usage by directly asking the user, since the VR system provides an immersive environment to the user. Thus, behavioral characteristic or physiological signal of users can be used as one of the evaluation indicators of these measurements. Today, new VR systems are emerging and VR-related technologies are expected to evolve steadily. In this context, the findings can contribute to future research directions and provide insights into conducting UX evaluation in VR system.


2020 ◽  
Vol 11 (1) ◽  
pp. 99-106
Author(s):  
Marián Hudák ◽  
Štefan Korečko ◽  
Branislav Sobota

AbstractRecent advances in the field of web technologies, including the increasing support of virtual reality hardware, have allowed for shared virtual environments, reachable by just entering a URL in a browser. One contemporary solution that provides such a shared virtual reality is LIRKIS Global Collaborative Virtual Environments (LIRKIS G-CVE). It is a web-based software system, built on top of the A-Frame and Networked-Aframe frameworks. This paper describes LIRKIS G-CVE and introduces its two original components. The first one is the Smart-Client Interface, which turns smart devices, such as smartphones and tablets, into input devices. The advantage of this component over the standard way of user input is demonstrated by a series of experiments. The second component is the Enhanced Client Access layer, which provides access to positions and orientations of clients that share a virtual environment. The layer also stores a history of connected clients and provides limited control over the clients. The paper also outlines an ongoing experiment aimed at an evaluation of LIRKIS G-CVE in the area of virtual prototype testing.


2020 ◽  
Vol 6 (3) ◽  
pp. 127-130
Author(s):  
Max B. Schäfer ◽  
Kent W. Stewart ◽  
Nico Lösch ◽  
Peter P. Pott

AbstractAccess to systems for robot-assisted surgery is limited due to high costs. To enable widespread use, numerous issues have to be addressed to improve and/or simplify their components. Current systems commonly use universal linkage-based input devices, and only a few applicationoriented and specialized designs are used. A versatile virtual reality controller is proposed as an alternative input device for the control of a seven degree of freedom articulated robotic arm. The real-time capabilities of the setup, replicating a system for robot-assisted teleoperated surgery, are investigated to assess suitability. Image-based assessment showed a considerable system latency of 81.7 ± 27.7 ms. However, due to its versatility, the virtual reality controller is a promising alternative to current input devices for research around medical telemanipulation systems.


2018 ◽  
Vol 11 (4) ◽  
pp. 1-27 ◽  
Author(s):  
Lal "Lila" Bozgeyikli ◽  
Evren Bozgeyikli ◽  
Srinivas Katkoori ◽  
Andrew Raij ◽  
Redwan Alqasemi

i-com ◽  
2020 ◽  
Vol 19 (2) ◽  
pp. 67-85
Author(s):  
Matthias Weise ◽  
Raphael Zender ◽  
Ulrike Lucke

AbstractThe selection and manipulation of objects in Virtual Reality face application developers with a substantial challenge as they need to ensure a seamless interaction in three-dimensional space. Assessing the advantages and disadvantages of selection and manipulation techniques in specific scenarios and regarding usability and user experience is a mandatory task to find suitable forms of interaction. In this article, we take a look at the most common issues arising in the interaction with objects in VR. We present a taxonomy allowing the classification of techniques regarding multiple dimensions. The issues are then associated with these dimensions. Furthermore, we analyze the results of a study comparing multiple selection techniques and present a tool allowing developers of VR applications to search for appropriate selection and manipulation techniques and to get scenario dependent suggestions based on the data of the executed study.


2021 ◽  
Vol 126 ◽  
pp. 103090
Author(s):  
Xin Zou ◽  
Steve O'Hern ◽  
Barrett Ens ◽  
Selby Coxon ◽  
Pascal Mater ◽  
...  

2019 ◽  
Vol 25 (5) ◽  
pp. 2134-2144 ◽  
Author(s):  
Marc Erich Latoschik ◽  
Florian Kern ◽  
Jan-Philipp Stauffert ◽  
Andrea Bartl ◽  
Mario Botsch ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document