Deep Learning Approaches for Sentiment Analysis Challenges and Future Issues

2022 ◽  
pp. 27-50
Author(s):  
Rajalaxmi Prabhu B. ◽  
Seema S.

A lot of user-generated data is available these days from huge platforms, blogs, websites, and other review sites. These data are usually unstructured. Analyzing sentiments from these data automatically is considered an important challenge. Several machine learning algorithms are implemented to check the opinions from large data sets. A lot of research has been undergone in understanding machine learning approaches to analyze sentiments. Machine learning mainly depends on the data required for model building, and hence, suitable feature exactions techniques also need to be carried. In this chapter, several deep learning approaches, its challenges, and future issues will be addressed. Deep learning techniques are considered important in predicting the sentiments of users. This chapter aims to analyze the deep-learning techniques for predicting sentiments and understanding the importance of several approaches for mining opinions and determining sentiment polarity.

2017 ◽  
Vol 10 (3) ◽  
pp. 660-663
Author(s):  
L. Dhanapriya ◽  
Dr. S. MANJU

In the recent development of IT technology, the capacity of data has surpassed the zettabyte, and improving the efficiency of business is done by increasing the ability of predictive through an efficient analysis on these data which has emerged as an issue in the current society. Now the market needs for methods that are capable of extracting valuable information from large data sets. Recently big data is becoming the focus of attention, and using any of the machine learning techniques to extract the valuable information from the huge data of complex structures has become a concern yet an urgent problem to resolve. The aim of this work is to provide a better understanding of this Machine Learning technique for discovering interesting patterns and introduces some machine learning algorithms to explore the developing trend.


2018 ◽  
Vol 3 ◽  
Author(s):  
Andreas Baumann

Machine learning is a powerful method when working with large data sets such as diachronic corpora. However, as opposed to standard techniques from inferential statistics like regression modeling, machine learning is less commonly used among phonological corpus linguists. This paper discusses three different machine learning techniques (K nearest neighbors classifiers; Naïve Bayes classifiers; artificial neural networks) and how they can be applied to diachronic corpus data to address specific phonological questions. To illustrate the methodology, I investigate Middle English schwa deletion and when and how it potentially triggered reduction of final /mb/ clusters in English.


Author(s):  
Sergey Pronin ◽  
Mykhailo Miroshnichenko

A system for analyzing large data sets using machine learning algorithms


Author(s):  
R Kanthavel Et.al

Osteoarthritis is mainly a familiar kind of arthritis when an elastic tissue named Cartilage that softens the tops of the bones, cracks down. The Person with osteoarthritis can encompass joint pain, inflexibility, or inflammation and there is no particular examination for osteoarthritis and physicians take the amalgamation of both medical cum clinical record and X-rays imaging analysis to make a diagnosis of the state. Osteoarthritis is generally only detected following ache and bone scratch and in advance, analysis could permit for ultimate involvement to avoid cartilage worsening and bone injury. Through machine-learning algorithms, the system can be trained to automatically distinguish among people who would develop osteoarthritis and persons who would not with the detection of exact biochemical variances in the midpoint of the knee’s cartilage. The outcome of the Machine learning Techniques will give the persons who are pre-symptomatic by the occasion of the baseline imaging and also the reduction in liquid concentration. In this study, we present the analysis of various deep learning techniques for timely detection of osteoarthritis disease. Several subsets of machine learning called deep learning techniques have been in use for the timely detection of osteoarthritis disease; and therefore analysis is needed highly to choose the best as far as accuracy and reliability are concerned.


2020 ◽  
Author(s):  
Adam Pond ◽  
Seongwon Hwang ◽  
Berta Verd ◽  
Benjamin Steventon

AbstractMachine learning approaches are becoming increasingly widespread and are now present in most areas of research. Their recent surge can be explained in part due to our ability to generate and store enormous amounts of data with which to train these models. The requirement for large training sets is also responsible for limiting further potential applications of machine learning, particularly in fields where data tend to be scarce such as developmental biology. However, recent research seems to indicate that machine learning and Big Data can sometimes be decoupled to train models with modest amounts of data. In this work we set out to train a CNN-based classifier to stage zebrafish tail buds at four different stages of development using small information-rich data sets. Our results show that two and three dimensional convolutional neural networks can be trained to stage developing zebrafish tail buds based on both morphological and gene expression confocal microscopy images, achieving in each case up to 100% test accuracy scores. Importantly, we show that high accuracy can be achieved with data set sizes of under 100 images, much smaller than the typical training set size for a convolutional neural net. Furthermore, our classifier shows that it is possible to stage isolated embryonic structures without the need to refer to classic developmental landmarks in the whole embryo, which will be particularly useful to stage 3D culture in vitro systems such as organoids. We hope that this work will provide a proof of principle that will help dispel the myth that large data set sizes are always required to train CNNs, and encourage researchers in fields where data are scarce to also apply ML approaches.Author summaryThe application of machine learning approaches currently hinges on the availability of large data sets to train the models with. However, recent research has shown that large data sets might not always be required. In this work we set out to see whether we could use small confocal microscopy image data sets to train a convolutional neural network (CNN) to stage zebrafish tail buds at four different stages in their development. We found that high test accuracies can be achieved with data set sizes of under 100 images, much smaller than the typical training set size for a CNN. This work also shows that we can robustly stage the embryonic development of isolated structures, without the need to refer back to landmarks in the tail bud. This constitutes an important methodological advance for staging organoids and other 3D culture in vitro systems. This work proves that prohibitively large data sets are not always required to train CNNs, and we hope will encourage others to apply the power of machine learning to their areas of study even if data are scarce.


Author(s):  
Mark E. Frisse ◽  
Karl E. Misulis

Healthcare analytics is a subject important to all informatics professionals, from providers to payers to regulators. The analysis of clinical and administrative data is essential to quality improvement, cost management, and research. With the advent of large data sets and sophisticated machine learning techniques, options are growing. Often, the weakness of an analytic approach is more due to a failure to ask a question that leads to clinical action or an inability to answer a question because the data available are not sufficient in either quality or quantity to address the primary concerns. Effective clinical informatics professionals focus on questions for which the data are sufficient and where answers can yield to improved actions.


2020 ◽  
Vol 8 (5) ◽  
pp. 1160-1166

In this paper existing writing for computer added diagnosis (CAD) based identification of lesions that might be connected in the early finding of Diabetic Retinopathy (DR) is talked about. The recognition of sores, for example, Microaneurysms (MA), Hemorrhages (HEM) and Exudates (EX) are incorporated in this paper. A range of methodologies starting from conventional morphology to deep learning techniques have been discussed. The different strategies like hand crafted feature extraction to automated CNN based component extraction, single lesion identification to multi sore recognition have been explored. The different stages in each methods beginning from the image preprocessing to classification stage are investigated. The exhibition of the proposed strategies are outlined by various performance measurement parameters and their used data sets are tabulated. Toward the end we examined the future headings.


2020 ◽  
Vol 6 ◽  
Author(s):  
Jaime de Miguel Rodríguez ◽  
Maria Eugenia Villafañe ◽  
Luka Piškorec ◽  
Fernando Sancho Caparrini

Abstract This work presents a methodology for the generation of novel 3D objects resembling wireframes of building types. These result from the reconstruction of interpolated locations within the learnt distribution of variational autoencoders (VAEs), a deep generative machine learning model based on neural networks. The data set used features a scheme for geometry representation based on a ‘connectivity map’ that is especially suited to express the wireframe objects that compose it. Additionally, the input samples are generated through ‘parametric augmentation’, a strategy proposed in this study that creates coherent variations among data by enabling a set of parameters to alter representative features on a given building type. In the experiments that are described in this paper, more than 150 k input samples belonging to two building types have been processed during the training of a VAE model. The main contribution of this paper has been to explore parametric augmentation for the generation of large data sets of 3D geometries, showcasing its problems and limitations in the context of neural networks and VAEs. Results show that the generation of interpolated hybrid geometries is a challenging task. Despite the difficulty of the endeavour, promising advances are presented.


IoT ◽  
2020 ◽  
Vol 1 (2) ◽  
pp. 551-604
Author(s):  
Damien Warren Fernando ◽  
Nikos Komninos ◽  
Thomas Chen

This survey investigates the contributions of research into the detection of ransomware malware using machine learning and deep learning algorithms. The main motivations for this study are the destructive nature of ransomware, the difficulty of reversing a ransomware infection, and how important it is to detect it before infecting a system. Machine learning is coming to the forefront of combatting ransomware, so we attempted to identify weaknesses in machine learning approaches and how they can be strengthened. The threat posed by ransomware is exceptionally high, with new variants and families continually being found on the internet and dark web. Recovering from ransomware infections is difficult, given the nature of the encryption schemes used by them. The increase in the use of artificial intelligence also coincides with this boom in ransomware. The exploration into machine learning and deep learning approaches when it comes to detecting ransomware poses high interest because machine learning and deep learning can detect zero-day threats. These techniques can generate predictive models that can learn the behaviour of ransomware and use this knowledge to detect variants and families which have not yet been seen. In this survey, we review prominent research studies which all showcase a machine learning or deep learning approach when detecting ransomware malware. These studies were chosen based on the number of citations they had by other research. We carried out experiments to investigate how the discussed research studies are impacted by malware evolution. We also explored the new directions of ransomware and how we expect it to evolve in the coming years, such as expansion into IoT (Internet of Things), with IoT being integrated more into infrastructures and into homes.


Sign in / Sign up

Export Citation Format

Share Document