Numerical Analysis of Streamlines in Kaplan Turbine with Different Distributor Fins Design

2020 ◽  
Vol 35 ◽  
pp. 46-54
Author(s):  
Daniele Twardowski ◽  
Diego Alves de Miranda
Keyword(s):  
Stokes Equations ◽  
Turbine Blades ◽  
Navier Stokes ◽  
Flow Profile ◽  
Ansys Fluent ◽  
Navier Stokes Equations ◽  
Kaplan Turbine ◽  
Current Lines ◽  
High Level ◽  
Volume Method

With each passing day companies are looking more and more in the initial phase of the project, to understand the phenomena arising, so that in the execution of the project there are no failures, much less when the project is in operation. For this, the numerical simulation has been shown an increasingly efficient tool to assist the engineers and designers of machines and equipment. The Kaplan turbine design requires a high level of engineering expertise combined with a high level of knowledge in fluid mechanics, as poor design of a diffuser fin can lead to disordered turbulent flow which, when mixed with a high pressure drop, can cavitate into turbine blades. The aim of this study is to evaluate different types of diffuser fin profiles in the inlet at Kaplan turbines. For this, numerical computer simulation was used with the aid of the Ansys Fluent software, in which simulations of water flow in a steady state occurred. The software works with the finite volume method for the discretization of the Navier-Stokes equations. The simulations have proved to be efficient in capturing current lines and pointing out the best flow profile in a project, avoiding more complex turbine blade problems.

scholarly journals CFD Analysis of airfoils with flaps for low Reynolds numbers

2019 ◽  
Vol 4 (4) ◽  
pp. 93-101
Author(s):  
William Denner Pires Fonseca ◽  
Max William Frasão Reis ◽  
Pedro Felipe Lavra Dias ◽  
Lourival Matos De Sousa Filho
Keyword(s):  
Stokes Equations ◽  
Mass Conservation ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Ansys Fluent ◽  
Navier Stokes Equations ◽  
Low Reynolds Numbers ◽  
Low Reynolds ◽  
Current Lines

This paper presents a numerical investigation of the aerodynamic flow through airfoils with and without flaps for low Reynolds numbers. A two-dimensional, permanent, viscous model is adopted in the problem. The mass conservation and Navier-Stokes equations are discretized using two numerical methods, the panels method and the finite volume method, using CFD (Computational Fluid Dynamics) XFLR5® and ANSYS Fluent™ softwares. Initially, the work aims to compare the results obtained in the numerical simulation for different mesh refining with the analytical model available in the literature. Afterwards, it was verified how the pressure fields, velocity, current lines, drag and carry coefficients for symmetrical and asymmetrical airfoils work. Then, which airfoil is the most aerodynamically efficient, and finally, which numerical method is more feasible for two-dimensional and incompressible aerodynamic simulations.

scholarly journals Dynamics of Single Droplet Splashing on Liquid Film by Coupling FVM with VOF

Processes ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 841
Author(s):  
Yuzhen Jin ◽  
Huang Zhou ◽  
Linhang Zhu ◽  
Zeqing Li
Keyword(s):  
Liquid Film ◽  
Weber Number ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Single Droplet ◽  
Navier Stokes Equations ◽  
Volume Method ◽  
The Relationship

A three-dimensional numerical study of a single droplet splashing vertically on a liquid film is presented. The numerical method is based on the finite volume method (FVM) of Navier–Stokes equations coupled with the volume of fluid (VOF) method, and the adaptive local mesh refinement technology is adopted. It enables the liquid–gas interface to be tracked more accurately, and to be less computationally expensive. The relationship between the diameter of the free rim, the height of the crown with different numbers of collision Weber, and the thickness of the liquid film is explored. The results indicate that the crown height increases as the Weber number increases, and the diameter of the crown rim is inversely proportional to the collision Weber number. It can also be concluded that the dimensionless height of the crown decreases with the increase in the thickness of the dimensionless liquid film, which has little effect on the diameter of the crown rim during its growth.

The inlet flow structure of a conceptual open-nose supersonic drone

2021 ◽  
pp. 095441002098304
Author(s):  
Eiman B Saheby ◽  
Xing Shen ◽  
Anthony P Hays ◽  
Zhang Jun
Keyword(s):  
Flow Structure ◽  
Stokes Equations ◽  
Fluid Dynamic ◽  
Three Dimensional ◽  
Computational Fluid Dynamic Simulation ◽  
Navier Stokes ◽  
Ansys Fluent ◽  
Navier Stokes Equations ◽  
Aerodynamic Efficiency ◽  
Performance Effects

This study describes the aerodynamic efficiency of a forebody–inlet configuration and computational investigation of a drone system, capable of sustainable supersonic cruising at Mach 1.60. Because the whole drone configuration is formed around the induction system and the design is highly interrelated to the flow structure of forebody and inlet efficiency, analysis of this section and understanding its flow pattern is necessary before any progress in design phases. The compression surface is designed analytically using oblique shock patterns, which results in a low drag forebody. To study the concept, two inlet–forebody geometries are considered for Computational Fluid Dynamic simulation using ANSYS Fluent code. The supersonic and subsonic performance, effects of angle of attack, sideslip, and duct geometries on the propulsive efficiency of the concept are studied by solving the three-dimensional Navier–Stokes equations in structured cell domains. Comparing the results with the available data from other sources indicates that the aerodynamic efficiency of the concept is acceptable at supersonic and transonic regimes.

Effect of the Separating Distance of Twin Buildings on the Generated Flow Structure

2010 ◽  
Vol 297-301 ◽  
pp. 924-929
Author(s):  
Inès Bhouri Baouab ◽  
Nejla Mahjoub Said ◽  
Hatem Mhiri ◽  
Georges Le Palec ◽  
Philippe Bournot
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Reynolds Stress Model ◽  
Navier Stokes ◽  
Wind Flow ◽  
Turbulent Model ◽  
Navier Stokes Equations ◽  
Twin Buildings ◽  
Volume Method ◽  
Numerical Examination

The present work consists in a numerical examination of the dispersion of pollutants discharged from a bent chimney and crossing twin similar cubic obstacles placed in the lee side of the source. The resulting flow is assumed to be steady, three-dimensional and turbulent. Its modelling is based upon the resolution of the Navier Stokes equations by means of the finite volume method together with the RSM (Reynolds Stress Model) turbulent model. This examination aims essentially at detailing the wind flow perturbations, the recirculation and turbulence generated by the presence of the twin cubic obstacles placed tandem at different spacing distances (gaps): W = 4 h, W = 2 h and W = 1 h where W is the distance separating both buildings.

Numerical Investigation of Flow Around Bluff Bodies

1998 ◽  
Vol 14 (3) ◽  
pp. 153-159 ◽  
Author(s):  
Chou-Jiu Tsai ◽  
Ger-Jyh Chen
Keyword(s):  
Vortex Shedding ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Bluff Bodies ◽  
Near Wake ◽  
Navier Stokes Equations ◽  
Physical Description ◽  
Geometrical Shapes ◽  
Flow Phenomena ◽  
Volume Method

ABSTRACTIn this study, fluid flow around bluff bodies are studied to examine the vortex shedding phenomenon in conjuction with the geometrical shapes of these vortex shedders. These flow phenomena are numerically simulated. A finite volume method is employed to solve the incompressible two-dimensional Navier-Stokes equations. Thus, quantitative descriptions of the vortex shedding phenomenon in the near wake were made, which lead to a detailed description of the vortex shedding mechanism. Streamline contours, figures of lift coefficent, and figures of drag coefficent in various time, are presented, respectively, for a physical description.

Iterative method for solving fully-coupled fluid solid systems

2010 ◽  
pp. 653-670
Author(s):  
Elisabeth Longatte
Keyword(s):  
Stokes Equations ◽  
Cross Flow ◽  
Elastic Cylinder ◽  
Navier Stokes ◽  
Arbitrary Lagrangian Eulerian ◽  
Navier Stokes Equations ◽  
Ale Formulation ◽  
Volume Method ◽  
Fully Coupled ◽  
Solid System

This work is concerned with the modelling of the interaction of a fluid with a rigid or a flexible elastic cylinder in the presence of axial or cross-flow. A partitioned procedure is involved to perform the computation of the fully-coupled fluid solid system. The fluid flow is governed by the incompressible Navier-Stokes equations and modeled by using a fractional step scheme combined with a co-located finite volume method for space discretisation. The motion of the fluid domain is accounted for by a moving mesh strategy through an Arbitrary Lagrangian-Eulerian (ALE) formulation. Solid dyncamics is modeled by a finite element method in the linear elasticity framework and a fixed point method is used for the fluid solid system computation. In the present work two examples are presented to show the method robustness and efficiency.

Sign in / Sign up

Export Citation Format

Share Document