Study on Discharge of Separated Water Droplets in DC Field

2011 ◽  
Vol 130-134 ◽  
pp. 3276-3279
Author(s):  
Zong Xi Zhang ◽  
Shan Feng Yin
Keyword(s):  
Electric Field ◽  
Hydrophobic Surface ◽  
Electrical Equipment ◽  
Water Droplets ◽  
Surface Flashover ◽  
Voltage Drops ◽  
Flashover Voltage ◽  
Dc Electric Field ◽  
Water Drops ◽  
And Migration

With the accelerating construction of strong smart grid, and the grid voltage level rising, performance requirements for the electrical insulation of electrical equipment also continue to increase. In terms of the advantages of RTV on antifouling, RTV-based paints coated insulator coating capacity of its flash tolerance can significantly increase, mainly due to RTV coating hydrophobic hydrophobicity and migration. But when the hydrophobic surface is in the fully wet, many small drops of water in the surface will be gathered into big drops of water, and these large droplets will distort the surface electric field of the medium. So the flashover voltage of the hydrophobic surface’s separated water droplets under DC electric field are analyzed comparatively in this paper, while some influencing factors such as different medias and volume of water drops, are introduced in specific experiments, and their effects on the flashover voltage are analyzed; under DC electric field experiment on the surface of hydrophobic and hydrophilic surface flashover voltage drops separation characteristics were studied.

scholarly journals Study of the Behavior of Water Droplets Under the Influence of a Uniform Electric Field on Conventional Polyethylene and on Crosslinked Polyethylene (XLPE) with MgO Nanoparticles Samples

2017 ◽  
Vol 7 (1) ◽  
pp. 1323-1328 ◽  
Author(s):  
C. Charalambous ◽  
M. Danikas ◽  
Y. Yin ◽  
N. Vordos ◽  
J. W. Nolan ◽  
...  
Keyword(s):  
Electric Field ◽  
Uniform Electric Field ◽  
Water Droplets ◽  
Nano Structure ◽  
Insulating Materials ◽  
Mgo Nanoparticles ◽  
Underground Cables ◽  
Flashover Voltage ◽  
Surface Damages ◽  
Water Drops

It is well known that polyethylene (PE) and cross-linked polyethylene (XLPE) are suitable insulating materials for underground cables. Samples of PE and of XLPE with MgO nanoparticles were investigated regarding their flashover behaviour with a uniform electric field and water droplets of various conductivities. In the present paper, the effect of the mounting arrangement of the water drops on the value of the flashover voltage and the effect of the volume of dripping water on the flashover voltage were also studied. Surface damages were analyzed using Scanning Electron Microscopy (SEM) studies and the study of the nano-structure of the samples was studied using the SAXS system.

The Distinguishing Quality of Water Droplets on Insulating Surface under AC and DC Electric Field Stress

2014 ◽  
Vol 1025-1026 ◽  
pp. 803-808
Author(s):  
Sackthavy Chandavong ◽  
Kittipong Tonmitr ◽  
Arkom Kaewrawang
Keyword(s):  
Electric Field ◽  
Water Droplets ◽  
Insulating Material ◽  
Field Stress ◽  
Ac Electric Field ◽  
Quality Of Water ◽  
Electric Field Direction ◽  
Surface Breakdown ◽  
Dc Electric Field

This paper presents the comparison of water droplets on insulating surface under alternating current (AC) and direct current (DC) electric field. Besides that, it is demonstrated about the insulator deterioration under both electric field stressed due to an ageing and partial discharge (PD) phenomenon. The vital parameters factors are water droplets conductivity, droplet volume, surface roughness and droplet positioning that they cause to occur the electric field intensification. The field is intensified at the interface between the droplet, air and insulating material. Thus, the PD occurred due to electric field intensification increases with the deformed droplet. The deformation of water droplet under AC electric field stress is more intense than DC field. The electrostatic forces change the droplet shapes and spread them along the electric field direction. The local electric field intensification provokes the PD giving way to reduction of hydrophobicity of insulator surfaces. In addition, the PD activity could appear as a trigger for a surface breakdown. And the localized arcs cause damage to insulating material then finally leads to deterioration of insulation materials and the pollutant contamination.

scholarly journals Experimental study on the effect of applying a crossed magnetic field on the insulator flashover behavior in high vacuum

2015 ◽  
Vol 05 (03) ◽  
pp. 1550026
Author(s):  
K. Abu-Elabass
Keyword(s):  
Magnetic Field ◽  
Electric Field ◽  
Transverse Magnetic Field ◽  
High Vacuum ◽  
Transverse Magnetic ◽  
Magnetic Flux Density ◽  
Surface Flashover ◽  
Vacuum Degree ◽  
Flashover Voltage ◽  
Insulator Flashover

In this study, a possible method of reducing the flashover stress is achieved by the effect of an additional magnetic field in the transverse direction on the main applied electric field. The degree of vacuum used in this study was [Formula: see text] Pa. The magnetic flux density B employed in this study extends from [Formula: see text] to [Formula: see text] T. From the results obtained throughout this work, the transverse magnetic field increases the flashover voltage and decreases the leakage current. The effect of the transverse magnetic field on the surface flashover of the dielectric solid in vacuum shows a marked dependence on the material and the thickness of the test specimen, the vacuum degree, the type of electric field (AC or DC) as well as the type of magnetic field (AC or DC).

Sign in / Sign up

Export Citation Format

Share Document