Research on Fretting Fatigue Life of Interference Fit and its Influencing Factors

2012 ◽  
Vol 251 ◽  
pp. 293-300 ◽  
Author(s):  
Chang Wu Huang ◽  
Guang Xue Yang ◽  
Nian Jun Fu ◽  
Ji Long Xie
Keyword(s):  
Fatigue Life ◽  
Life Prediction ◽  
Prediction Models ◽  
Fretting Fatigue ◽  
Damage Parameter ◽  
Fatigue Life Prediction ◽  
Element Analysis ◽  
Interference Fit ◽  
Bending Loads ◽  
Fretting Damage

Interference-Fit Components, Especially under Rotating Bending Loads, Usually Suffer Fretting Fatigue, which Tremendously Reduces Service Lives of the Components. by Taking Specimens with Different Interference-Fit Parameters for Fatigue Test, their Fretting Fatigue Lives Could Be Obtained. and through Using Finite Element Analysis (FEA) Software ABAQUS, the Ruiz Fretting Damage Parameter K(x) for each Tested Fatigue Specimen Were Achieved. then, According to the Test Data and the Results of Calculations, Two Fretting-Fatigue Life Prediction Models (model 1：N=c•K-α, and Model 2：N=λN0—m•Kn) )based on the Ruiz Fretting Damage Parameter Were Fitted, and their Ratλionalities and Validities Were Analyzed. at the same Time, the Influences of Interference-Fit Parameters -Interference Value (V), Casing outside Diameter (D), and Casing Length (L), Contact Pressure (p) and Friction Shear Stress (τ) on Fretting Fatigue Life Have Been Analyzed. the Results Showed that the Two Fitalic Textretting Fatigue Life Prediction Models Used in this Paper Were Valid, but, in Contrast, the Second One Was More Accurate and Rational; and that Fretting Fatigue Life (N) Decreased as V, D, L, P or τ Increasing.

Fatigue Life Prediction of Heat-Aging Vulcanized Natural Rubber

2006 ◽  
Vol 321-323 ◽  
pp. 518-521 ◽  
Author(s):  
Chang Su Woo ◽  
Wan Doo Kim
Keyword(s):  
Fatigue Life ◽  
Natural Rubber ◽  
Life Prediction ◽  
Prediction Equation ◽  
Damage Parameter ◽  
Fatigue Life Prediction ◽  
Aging Effects ◽  
Element Analysis ◽  
Fatigue Damage Parameter ◽  
Lagrange Strain

Heat-aging effects on the material properties and fatigue life prediction of natural rubber were experimentally investigated. The rubber specimens were heat-aged in an oven at the temperature ranging from 50oC to 100oC for a period ranging from 1 day to 90days. Fatigue life prediction methodology of vulcanized natural rubber was proposed by incorporating the finite element analysis and fatigue damage parameter determined from fatigue test. Fatigue life prediction equation effectively represented by a single function using the Green-Lagrange strain. Predicted lives are in a good agreement with the experimental lives within a factor of two

Review of Multiaxial Fatigue Life Prediction Technology under Complex Loading

2010 ◽  
Vol 118-120 ◽  
pp. 283-288 ◽  
Author(s):  
Lei Wang ◽  
Wu Zhen Li ◽  
Tian Zhong Sui
Keyword(s):  
Fatigue Life ◽  
Life Prediction ◽  
Prediction Models ◽  
Complex Loading ◽  
Damage Parameter ◽  
Multiaxial Fatigue ◽  
Fatigue Life Prediction ◽  
Theoretical Research ◽  
Practical Engineering ◽  
Fatigue Damage Parameter

The research on multiaxial fatigue life prediction methods is reviewed in the present paper from two aspects of experiment and theory. It is pointed out that the reasonable methods of the critical plane determining, multiaxial cycle counting and multiaxial fatigue damage parameter fixing are necessary if the fatigue life prediction models established under the multiaxial constant amplitude loading were applied to the life prediction of the complex multiaxial load. The shortcomings of existing researches are discussed. In the aspect of experiment, it is devoid of the multiaxial fatigue test that the loading components acted with different frequencies, and in the aspect of theory, the additional hardening effect of the multiaxial out-of-frequency loading is not considered. Both in the theoretical research and practical engineering applications, the problem of the out-of-frequency multiaxial loading is a pressing issue.

Testing and assessment of fatigue life prediction models for Indian PHWRs piping material under multi-axial load cycling

2016 ◽  
Vol 85 ◽  
pp. 98-113 ◽  
Author(s):  
Punit Arora ◽  
Suneel K. Gupta ◽  
V. Bhasin ◽  
R.K. Singh ◽  
S. Sivaprasad ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Axial Load ◽  
Life Prediction ◽  
Prediction Models ◽  
Fatigue Life Prediction ◽  
Load Cycling

Probabilistic fretting fatigue life prediction of Ti–6Al–4V

2010 ◽  
Vol 32 (12) ◽  
pp. 1937-1947 ◽  
Author(s):  
Patrick J. Golden ◽  
Harry R. Millwater ◽  
Xiaobin Yang
Keyword(s):  
Fatigue Life ◽  
Life Prediction ◽  
Fretting Fatigue ◽  
Fatigue Life Prediction

TTK Chitra tilting disc heart valve model TC2: An assessment of fatigue life and durability

2017 ◽  
Vol 231 (8) ◽  
pp. 758-765 ◽  
Author(s):  
NN Subhash ◽  
Adathala Rajeev ◽  
Sreedharan Sujesh ◽  
CV Muraleedharan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Heart Valve ◽  
Life Prediction ◽  
Heart Valves ◽  
Failure Modes ◽  
Fatigue Life Prediction ◽  
Element Analysis ◽  
Valve Model

Average age group of heart valve replacement in India and most of the Third World countries is below 30 years. Hence, the valve for such patients need to be designed to have a service life of 50 years or more which corresponds to 2000 million cycles of operation. The purpose of this study was to assess the structural performance of the TTK Chitra tilting disc heart valve model TC2 and thereby address its durability. The TC2 model tilting disc heart valves were assessed to evaluate the risks connected with potential structural failure modes. To be more specific, the studies covered the finite element analysis–based fatigue life prediction and accelerated durability testing of the tilting disc heart valves for nine different valve sizes. First, finite element analysis–based fatigue life prediction showed that all nine valve sizes were in the infinite life region. Second, accelerated durability test showed that all nine valve sizes remained functional for 400 million cycles under experimental conditions. The study ensures the continued function of TC2 model tilting disc heart valves over duration in excess of 50 years. The results imply that the TC2 model valve designs are structurally safe, reliable and durable.

scholarly journals A Fatigue Life Prediction Model Based on Modified Resolved Shear Stress for Nickel-Based Single Crystal Superalloys

Metals ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 180 ◽  
Author(s):  
Jialiang Wang ◽  
Dasheng Wei ◽  
Yanrong Wang ◽  
Xianghua Jiang
Keyword(s):  
Shear Stress ◽  
Fatigue Life ◽  
Prediction Model ◽  
Single Crystal ◽  
Life Prediction ◽  
Stress Amplitude ◽  
Damage Parameter ◽  
Fatigue Life Prediction ◽  
Model Based ◽  
Life Prediction Model

In this paper, the viewpoint that maximum resolved shear stress corresponding to the two slip systems in a nickel-based single crystal high-temperature fatigue experiment works together was put forward. A nickel-based single crystal fatigue life prediction model based on modified resolved shear stress amplitude was proposed. For the four groups of fatigue data, eight classical fatigue life prediction models were compared with the model proposed in this paper. Strain parameter is poor in fatigue life prediction as a damage parameter. The life prediction results of the fatigue life prediction model with stress amplitude as the damage parameter, the fatigue life prediction model with maximum resolved shear stress in 30 slip directions as the damage parameter, and the McDiarmid (McD) model, are better. The model proposed in this paper has higher life prediction accuracy.

Sign in / Sign up

Export Citation Format

Share Document