A Study of Bipolar Walsh-Hadamard Coding Method in Optical CDMA Networks

2013 ◽  
Vol 284-287 ◽  
pp. 2667-2671
Author(s):  
Chih Ta Yen ◽  
Wen Bin Chen
Keyword(s):  
Multiple Access ◽  
Multiple Access Interference ◽  
Optical Filters ◽  
Optical Cdma ◽  
Spectral Amplitude ◽  
Eye Diagram ◽  
Cdma Networks ◽  
Coding Method ◽  
Simulation Results ◽  
Spectral Amplitude Coding

This study analyzes and calculates unipolar and bipolar coded configurations of spectral-amplitude-coding optical division multiple access (SAC-OCDMA) systems by using analytic and simulated methods. The important feature of the SAC-OCDMA systems is that multiple access interference (MAI) can be eliminated by code sequences of a fixed in-phase cross-correlation value. This property can be effectively canceled by multiple access interference by using balance detection schemes. This study uses Walsh-Hadamard codes as signature codes for the unipolar and bipolar schemes. The coder and decoder structures are based on optical filters of fiber Bragg gratings (FBGs). The simulation results of unipolar/bipolar coding structures are first presented by commercial simulation obtained using OptiSystem software. The simulation results show that the bit error rate (BER) through use of the bipolar coding method is superior to the unipolar scheme, especially when the received effect power is large. The eye diagram also shows that the bipolar encoding structure exhibits a wider opening than the unipolar encoding structure.

Unified KS-Code

2009 ◽  
pp. 1473-1479 ◽  
Author(s):  
M. K.A. Abdullah ◽  
S. A. Aljunid ◽  
M. D.A. Samad ◽  
S. B.A. Anas ◽  
R. K.Z. Sahbudin
Keyword(s):  
Multiple Access ◽  
Direct Detection ◽  
Multiple Access Interference ◽  
Optical Cdma ◽  
Spectral Amplitude ◽  
Service Guarantees ◽  
Narrow Bandwidth ◽  
Network Topologies ◽  
Spectral Amplitude Coding ◽  
Code Division Multiple

Many codes have been proposed for optical CDMA system as discussed in Svetislav, Mari, Zoran, Kosti, and Titlebaum (1993), Salehi (1989), Liu and Tsao (2002), Maric, Moreno, and Corrada (1996), Wei and Ghafouri-Shiraz (2002), and Prucnal, Santoro, and Ting (1986). Optical code division multiple access (OCDMA) has been recognized as one of the most important technologies for supporting many users in shared media simultaneous, and in some cases can increase the transmission capacity of an optical fiber. OCDMA is an exciting developments in short haul optical networking because it can support both wide and narrow bandwidth applications on the same network, it connects large number of asynchronous users with low latency and jitter, and permits quality of service guarantees to be managed at the physical layer, offers robust signal security and has simplified network topologies. However, for improperly designed codes, the maximum number of simultaneous users and the performance of the system can be seriously limited by the multiple access interference (MAI) or crosstalk from other users. Another issue in OCDMA is how the coding is implemented. The beginning idea of OCDMA was restricted in time domain, in which the encoding/decoding could not been fully utilized in optical domain. Therefore a new coding in OCDMA has been introduced based on spectral encoding (Kavehrad & Zaccarin, 1995; Pearce & Aazhang, 1994; Smith, Blaikie, & Taylor, 1998; Wei & Ghafouri-Shiraz, 2002). The system, called Optical Spectrum CDMA, or OS-CDMA, has the advantage of using inexpensive optical sources, and simple direct detection receivers. In this article with an emphasis on the Spectral Amplitude Coding scheme, a new code known as Khazani-Syed (KS) code is introduced.

A Review on Successive Interference Cancellation Scheme Based on Optical CDMA Network

2014 ◽  
Vol 35 (4) ◽  
Author(s):  
N. Alsowaidi ◽  
T. Eltaif ◽  
M. R. Mokhtar
Keyword(s):  
Interference Cancellation ◽  
Multiple Access ◽  
Direct Detection ◽  
Multiple Access Interference ◽  
Successive Interference Cancellation ◽  
Optical Cdma ◽  
Spectral Amplitude ◽  
Cdma System ◽  
Spectral Amplitude Coding ◽  
Code Division Multiple

AbstractDue to various desirable features of optical code division multiple access (OCDMA), it is believed this technique once developed and commercially available will be an integral part of optical access networks. Optical CDMA system suffers from a problem called multiple access interference (MAI) which limits the number of active users, it occurs when number of active users share the same carriers. The aim of this paper is to review successive interference cancellation (SIC) scheme based on optical CDMA system. The paper also reviews the system performance in presence of shot noise, thermal noise, and phase–induced intensity noise (PIIN). A comprehensive review on the mathematical model of SIC scheme using direct detection (DS) and spectral amplitude coding (SAC) were presented in this article.

A Review on Spectral Amplitude Coding Optical Code Division Multiple Access

2017 ◽  
Vol 38 (1) ◽  
Author(s):  
Navpreet Kaur ◽  
Rakesh Goyal ◽  
Monika Rani
Keyword(s):  
Code Division Multiple Access ◽  
Multiple Access ◽  
Noise Source ◽  
Direct Detection ◽  
Multiple Access Interference ◽  
Optical Cdma ◽  
Spectral Amplitude ◽  
Correlation Property ◽  
Spectral Amplitude Coding ◽  
Code Division Multiple

AbstractThis manuscript deals with analysis of Spectral Amplitude Coding Optical Code Division Multiple Access (SACOCDMA) system. The major noise source in optical CDMA is co-channel interference from other users known as multiple access interference (MAI). The system performance in terms of bit error rate (BER) degrades as a result of increased MAI. It is perceived that number of users and type of codes used for optical system directly decide the performance of system. MAI can be restricted by efficient designing of optical codes and implementing them with unique architecture to accommodate more number of users. Hence, it is a necessity to design a technique like spectral direct detection (SDD) technique with modified double weight code, which can provide better cardinality and good correlation property.

Performance Enhancement of Encoding–Decoding Multidiagonal and Walsh Hadamard Codes for Spectral Amplitude Coding-Optical Code Division Multiple Access (SAC-OCDMA) Utilizing Dispersion Compensated Fiber

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Majidah H. Majeed ◽  
Riyadh Khlf Ahmed
Keyword(s):  
Multiple Access ◽  
Performance Enhancement ◽  
Optical Network ◽  
Spectral Amplitude ◽  
Q Factor ◽  
Data Traffic ◽  
Eye Diagram ◽  
Multiple User ◽  
Spectral Amplitude Coding ◽  
Code Division Multiple

AbstractSpectral Amplitude Coding-Optical Codes Division Multiple Access (SAC-OCDMA) is a future multiplexing technique that witnessed a dramatic attraction for eliminating the problems of the internet in optical network field such as multiple-user access and speed’s growth of the files or data traffic. In this research article, the performance of SAC-OCDMA system based on two encoding–decoding multidiagonal (MD) and Walsh Hadamard (WH) codes is enhanced utilizing three different schemes of dispersion compensating fiber (DCF): pre-, post- and symmetrical compensation. The system is simulated using Optisystem version 7.0 and Optigrating version 4.2. The performance of the proposed system is specified in terms of bit error rate (BER), Q-factor and eye diagram. It has been observed that the compensated system based on MD code is performs much better compared to the system based on WH code. On the other hand, the compensated SAC-OCDMA system with symmetrical DCF has the lowest values of BER and largest values of Q-factor, so it is considered the best simulated scheme contrasted with pre- and post-DCF.

A Novel Technique to Detect Code for SAC-OCDMA System

2018 ◽  
Vol 39 (2) ◽  
pp. 215-221 ◽  
Author(s):  
Manisha Bharti ◽  
Manoj Kumar ◽  
Ajay K. Sharma
Keyword(s):  
Multiple Access ◽  
Optical Power ◽  
Multiple Access Interference ◽  
Spectral Amplitude ◽  
Main Task ◽  
Received Power ◽  
Performance Deterioration ◽  
Spectral Amplitude Coding ◽  
Code Division Multiple ◽  
Detection Schemes

AbstractThe main task of optical code division multiple access (OCDMA) system is the detection of code used by a user in presence of multiple access interference (MAI). In this paper, new method of detection known as XOR subtraction detection for spectral amplitude coding OCDMA (SAC-OCDMA) based on double weight codes has been proposed and presented. As MAI is the main source of performance deterioration in OCDMA system, therefore, SAC technique is used in this paper to eliminate the effect of MAI up to a large extent. A comparative analysis is then made between the proposed scheme and other conventional detection schemes used like complimentary subtraction detection, AND subtraction detection and NAND subtraction detection. The system performance is characterized by Q-factor, BER and received optical power (ROP) with respect to input laser power and fiber length. The theoretical and simulation investigations reveal that the proposed detection technique provides better quality factor, security and received power in comparison to other conventional techniques. The wide opening of eye in case of proposed technique also proves its robustness.

Performance Analysis of Spectral Amplitude Coding Optical Code Division Multiple Access System using Modified Double Weight Codes with Adomian Decomposition Method

2018 ◽  
Vol 39 (4) ◽  
pp. 459-462 ◽  
Author(s):  
Monika Rani ◽  
Harbax Singh Bhatti ◽  
Vikramjeet Singh
Keyword(s):  
Code Division Multiple Access ◽  
Multiple Access ◽  
Decomposition Method ◽  
Adomian Decomposition Method ◽  
Multiple Access Interference ◽  
Spectral Amplitude ◽  
Adomian Decomposition ◽  
Spectral Amplitude Coding ◽  
Code Division Multiple ◽  
Multiple Access System

Abstract In this manuscript, we have analyzed a Spectral Amplitude Coding-Optical Code Division Multiple Access (SAC-OCDMA) System. The system performance is enhanced by reducing the effect of Multiple Access Interference (MAI) using uniform Fiber Bragg Gratings (FBGs) encoders and decoders at central office and subscriber’s end. The results are verified through a mathematical model and Modified Double Weight (MDW) codes for the proposed system using Adomian Decomposition Method (ADM). Further, we have demonstrated SAC-OCDMA system for transmission of 40 Gbps data rate up to a distance of 80 km by increasing the number of FBGs. The proposed system has been analyzed in terms of distance, bit error rate (BER) and Quality Factor.

scholarly journals Multiple-Code Technique for Multi-Rate Transmissions in Optical Packet Switching Networks Based on OCDMA Labels

Photonics ◽  
2019 ◽  
Vol 6 (2) ◽  
pp. 60 ◽  
Author(s):  
Kai-Sheng Chen
Keyword(s):  
Multiple Access ◽  
Packet Switching ◽  
Multiple Access Interference ◽  
Optical Packet Switching ◽  
Spectral Amplitude ◽  
Multiple Data ◽  
Rate Transmission ◽  
Multiple Code ◽  
Spectral Amplitude Coding ◽  
Code Division Multiple

Supporting multi-rate transmission is an essential factor in current optical packet switching (OPS) networks. In this paper, the author studied a multi-rate scheme capable of forwarding packets with different signal rates based on label switching. The multiple-code (MC) technique was employed to label a packet by conveying its payload bits to multiple optical code-division multiple-access (OCDMA) labels. Spectral-amplitude-coding (SAC), which represents the chips in an OCDMA code as a set of wavelengths, was introduced to remove the multiple-access interference (MAI) from the overlapping among labels. The author tested the system effectiveness by conducting numerical analysis to formulate bit-error probability (BEP) and spectral efficiency (SE). The simulation results showed that the proposed network had a stable BEP performance when switching the packet flows of multiple data-rates.

scholarly journals Packet Switching Strategy and Node Architecture of Extended Spectral-Amplitude-Coding Labels in GMPLS Networks

2019 ◽  
Vol 9 (7) ◽  
pp. 1513
Author(s):  
Kai-Sheng Chen
Keyword(s):  
Wavelength Division Multiplexing ◽  
Multiple Access ◽  
Packet Switching ◽  
Multiple Access Interference ◽  
Spectral Amplitude ◽  
Network Nodes ◽  
Wavelength Division ◽  
Node Architecture ◽  
Spectral Amplitude Coding ◽  
Code Division Multiple

We present packet switching applications based on extended spectral-amplitude-coding (SAC) labels in generalized multi-protocol label switching (GMPLS) networks. The proposed approach combines the advantages of wavelength-division multiplexing (WDM) and optical code-division multiple access (OCDMA). The extended SAC labels preserve the orthogonal property to avoid the effect of multiple access interference (MAI) shown at the decoder. We investigate the node architecture of label generation/recognition based on arrayed waveguide grating (AWG). Combining cyclic-shifted maximal length sequence (MLS) codes with the wavelength routed property of AWG simplifies the node structure. The simulation results show that the proposed labels achieve good performances against receiver noise due to the low average cross-correlation values. Under a given bit-error-rate (BER), the switching efficiency of the extended SAC labels outperforms the previous OCDMA schemes, as the network nodes are capable of processing a large number of labels simultaneously.

scholarly journals Performance analysis of spectral/spatial of OCDMA system using 2D hybrid ZCC/MD code

2019 ◽  
Vol 13 (2) ◽  
pp. 569
Author(s):  
Rima. Matem ◽  
S. A. Aljunid ◽  
M. N. Junita ◽  
C.B.M Rashidi ◽  
Israa Shihab Aqrab
Keyword(s):  
Multiple Access ◽  
Cross Correlation ◽  
Multiple Access Interference ◽  
Spectral Amplitude ◽  
Correlation Property ◽  
Two Dimensional ◽  
One Dimensional ◽  
Spectral Amplitude Coding ◽  
The One ◽  
Optical Coding

This paper proposes a new spectral/spatial code for Spectral Amplitude Coding in Optical Coding Division Multiple Access (SAC-OCDMA) called two-Dimensional hybrid ZCC/MD code. The new code combines two of the one –dimensional codes which are Zero Cross Correlation (1D ZCC) and Multi-Diagonal code (1D MD). Moreover, it produces a zero cross correlation property for each code. The main goal of this proposed code is to mitigate Phase Induced Intensity Noise and eliminate Multiple Access Interference (MAI). This proposed code can provide a better performance comparing to other codes as 2D FCC/MDW and 2D DPDC according to the obtained numerical analysis.

Sign in / Sign up

Export Citation Format

Share Document