Experimental Determination of Sound Absorption Coefficients of Four Types of Malaysian Wood

2013 ◽  
Vol 315 ◽  
pp. 577-581 ◽  
Author(s):  
Elammaran Jayamani ◽  
Sinin Hamdan ◽  
Nurizahusna Binti Suid
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Vibration Isolation ◽  
Noise Control ◽  
Sound Intensity ◽  
Sound Absorption Coefficient ◽  
Extraneous Noise ◽  
Isolation Vibration ◽  
American Society ◽  
Human Ear

Currently, one of the important topics in acoustic science is noise control. It is important to control the noise in order to minimize extraneous noise in rooms, buildings, and our environment. Noise control can be achieved by reducing the intensity of sound to the level that is not harmful to human ear. There are four basic principles employed to reduce noise which is absorption, isolation, vibration isolation, and vibration damping. In fact, the most recognized technique to reduce noise is sound absorption on the materials itself. Sound absorption on material such as wood and porous material have been developed and studied by few researchers. Materials that reduce the sound intensity as the sound wave passes through it by the phenomenon of absorption are called sound absorptive materials. There are lot of methods can be used on determining the sound absorption coefficient of materials. In this paper, a preliminary work has been carried out experimentally to determine the sound absorption coefficient of four types of Malaysian wood. They are Tapang (Koompassia excels), Pulai (Alstonai angustiloba), Selunsor merah (Tristianiopsis beccariana) and Jelutong (Dyera polyphylla). The test was performed using the ASTM E1050-98/ISO 10534-2 (American Society for Testing and Material) standards for the sound absorption coefficient testing. This method is known as impedance tube method (Two-Microphone Method). The absorption coefficient depends on the frequencies. In this study the values of the frequencies used was in the range from 350 Hz to 1000 Hz.

COMPARISON OF NORMAL INCIDENT SOUND ABSORPTION COEFFICIENT OF DIRECT PIERCING CARVED WOOD PANEL FOR CIRCULAR, GEOMETRY AND FLORAL DESIGN

2016 ◽  
Vol 78 (6-10) ◽  
Author(s):  
Mohd Zamri Jusoh ◽  
Nazli Che Din ◽  
Mohamad Ngasri Dimon
Keyword(s):  
Boundary Element Method ◽  
Absorption Coefficient ◽  
Sound Absorption ◽  
Sound Intensity ◽  
Normal Incidence ◽  
Sound Absorption Coefficient ◽  
Wood Panel ◽  
High Frequencies ◽  
Wood Carving ◽  
Circular Design

Direct Piercing Carved Wood Panel (DPCWP) is among the famous Malay wood carving art in the Malay culture. It is the best example of Malay people’s creativity and masterpiece. In this paper, the comparison of normal incidence sound absorption coefficient,  (SAC) for three major types of design for the DPCWP is discussed. The simplest form of DPCWP, the circular type, then the geometry and floral types were investigated based on simulation and measurement works using sound intensity method to determine the normal incidence SAC, for 30% and 40% perforation ratios. The simulation work was carried out by using BEASY Acoustic software based on Boundary Element Method (BEM). From the results, there is an identical trend for DPCWP with geometry and floral design from 250 Hz to 4 kHz. At high frequencies (1 kHz to 4 kHz), both design show the tendency of decrement, suggesting that the complexity of the design does affect the average SAC value. However, for circular design, SAC is higher than other design at 1 kHz and shows a similar trend with other design at 2 kHz and 4 kHz for both simulation and measurement result.

scholarly journals Design and simulation of multilayer hybrid foam material for acoustic application

2021 ◽  
Vol 12 ◽  
pp. 10
Author(s):  
L. Yuvaraj ◽  
S. Jeyanthi ◽  
Lenin Babu Mailan Chinnapandi ◽  
Elammaran Jayamani
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Noise Control ◽  
Numerical Study ◽  
Characteristic Impedance ◽  
Sound Absorption Coefficient ◽  
Metallic Foam ◽  
Polymeric Foam ◽  
Closed Cell ◽  
The Individual

New acoustic multilayer absorber fabricated by coupling closed-cell metallic foam and open-cell polymeric foam, which aimed to develop a practical use of metallic foam in the noise control application. In prior, the individual sound absorption coefficient of both foam materials with different thicknesses measured by the impedance tube method as per ASTM E-1050. Using inverse characterization technique, the intrinsic properties needed for five parameter models in a numerical study are predicted. The measured characteristic impedance, complex wave propagation, and sound absorption coefficient of the individual foams are in close agreement with the prediction. Subsequently, a different configuration of multilayer absorber is modeled using obtained properties, and their acoustic performance is evaluated. The result indicates that the coupling of polymeric foam with metallic one exhibits enhanced sound absorption and usage of closed-cell metallic foam in noise control material. Furthermore, the result demonstrates that absorption capability entirely relies on the placement of polymeric foam in the configuration. The proposed hybrid multilayer absorber coupled with test bench car for interior acoustic study, where 5–30 dB is reduction is noticed in 1/3rd octave plot.

scholarly journals Acoustic Panels Made of Paper Sludge and Clay Composites

2021 ◽  
Vol 13 (2) ◽  
pp. 637
Author(s):  
Tomas Astrauskas ◽  
Tomas Januševičius ◽  
Raimondas Grubliauskas
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Composite Panel ◽  
Sound Absorption Coefficient ◽  
Core Material ◽  
Paper Sludge ◽  
Frequency Range ◽  
Absorption Properties ◽  
Air Gaps ◽  
The Core

Studies on recycled materials emerged during recent years. This paper investigates samples’ sound absorption properties for panels fabricated of a mixture of paper sludge (PS) and clay mixture. PS was the core material. The sound absorption was measured. We also consider the influence of an air gap between panels and rigid backing. Different air gaps (50, 100, 150, 200 mm) simulate existing acoustic panel systems. Finally, the PS and clay composite panel sound absorption coefficients are compared to those for a typical commercial absorptive ceiling panel. The average sound absorption coefficient of PS-clay composite panels (αavg. in the frequency range from 250 to 1600 Hz) was up to 0.55. The resulting average sound absorption coefficient of panels made of recycled (but unfinished) materials is even somewhat higher than for the finished commercial (finished) acoustic panel (αavg. = 0.51).

scholarly journals Air permeability and sound absorption coefficient changes from ultrasonic treatment in a cross section of Malas (Homalium foetidum)

2021 ◽  
Vol 67 (1) ◽  
Author(s):  
Chun-Won Kang ◽  
Eun-Suk Jang ◽  
Nam-Ho Lee ◽  
Sang-Sik Jang ◽  
Min Lee
Keyword(s):  
Absorption Coefficient ◽  
Ultrasonic Treatment ◽  
Sound Absorption ◽  
Gas Permeability ◽  
Treated Wood ◽  
Untreated Wood ◽  
Sound Absorption Coefficient ◽  
Permeability Constant ◽  
Average Value ◽  
Permeability Increase

AbstractWe investigated the effect of ultrasonic treatment on Malas (Homalium foetidum) gas permeability and sound absorption coefficient using the transfer function method. Results showed a longitudinal average Darcy permeability constant of 2.02 (standard deviation SD 0.72) for untreated wood and 6.15 (SD 3.07) for ultrasound-treated wood, a permeability increase of 3.04 times. We also determined the average sound absorption coefficients in the range of 50 to 6.4 kHz and NRC (noise reduction coefficient: average value of sound absorption coefficient value at 250, 500, 1000, and 2000 Hz) of untreated Malas. Those values were 0.23 (SD 0.02) and 0.13 (SD 0.01), respectively, while those of ultrasonic-treated Malas were 0.28 (SD 0.02) and 0.14 (SD 0.02), a 19.74% increase in average sound absorption coefficient.

Research of Possibilities of Using the Recycled Materials Based on Rubber and Textiles Combined with Vermiculite Material in the Area of ​​Noise Reduction

2014 ◽  
Vol 1001 ◽  
pp. 171-176 ◽  
Author(s):  
Pavol Liptai ◽  
Marek Moravec ◽  
Miroslav Badida
Keyword(s):  
Absorption Coefficient ◽  
Standing Wave ◽  
Sound Pressure Level ◽  
Sound Absorption ◽  
Sound Pressure ◽  
Sound Level ◽  
Pressure Level ◽  
Sound Absorption Coefficient ◽  
Physical Parameters ◽  
Materials Research

This paper describes possibilities in the use of recycled rubber granules and textile materials combined with vermiculite panel. The aim of the research is the application of materials that will be absorbing or reflecting sound energy. This objective is based on fundamental physical principles of materials research and acoustics. Method of measurement of sound absorption coefficient is based on the principle of standing wave in the impedance tube. With a sound level meter is measured maximum and minimum sound pressure level of standing wave. From the maximum and minimum sound pressure level of standing wave is calculated sound absorption coefficient αn, which can take values from 0 to 1. Determination of the sound absorption coefficient has been set in 1/3 octave band and in the frequency range from 50 Hz to 2000 Hz. In conclusion are proposed possibilities of application of these materials in terms of their mechanical and physical parameters.

scholarly journals Study on the sound absorption behavior of multi-component polyester nonwovens: experimental and numerical methods

2018 ◽  
Vol 89 (16) ◽  
pp. 3342-3361 ◽  
Author(s):  
Tao Yang ◽  
Ferina Saati ◽  
Kirill V Horoshenkov ◽  
Xiaoman Xiong ◽  
Kai Yang ◽  
...  
Keyword(s):  
Numerical Methods ◽  
Absorption Coefficient ◽  
Empirical Model ◽  
Surface Impedance ◽  
Sound Absorption ◽  
Low Frequency ◽  
Accurate Method ◽  
Small Error ◽  
Sound Absorption Coefficient ◽  
Acoustical Properties

This study presents an investigation of the acoustical properties of multi-component polyester nonwovens with experimental and numerical methods. Fifteen types of nonwoven samples made with staple, hollow and bi-component polyester fibers were chosen to carry out this study. The AFD300 AcoustiFlow device was employed to measure airflow resistivity. Several models were grouped in theoretical and empirical model categories and used to predict the airflow resistivity. A simple empirical model based on fiber diameter and fabric bulk density was obtained through the power-fitting method. The difference between measured and predicted airflow resistivity was analyzed. The surface impedance and sound absorption coefficient were determined by using a 45 mm Materiacustica impedance tube. Some widely used impedance models were used to predict the acoustical properties. A comparison between measured and predicted values was carried out to determine the most accurate model for multi-component polyester nonwovens. The results show that one of the Tarnow model provides the closest prediction to the measured value, with an error of 12%. The proposed power-fitted empirical model exhibits a very small error of 6.8%. It is shown that the Delany–Bazley and Miki models can accurately predict surface impedance of multi-component polyester nonwovens, but the Komatsu model is less accurate, especially at the low-frequency range. The results indicate that the Miki model is the most accurate method to predict the sound absorption coefficient, with a mean error of 8.39%.

Sign in / Sign up

Export Citation Format

Share Document