Control System Design Based on CANopen Network for Multi-Legged Robot with Hand-Fused Foot

2010 ◽  
Vol 42 ◽  
pp. 307-312 ◽  
Author(s):  
Yu Xiao Zhang ◽  
Xian Qun Zeng ◽  
Xin Jie Wang
Keyword(s):  
Communication Network ◽  
Control System ◽  
System Design ◽  
Motion Control ◽  
Closed Loop ◽  
Reliability And Validity ◽  
Control System Design ◽  
Closed Loop Control ◽  
Legged Robot ◽  
Loop Control

In this paper, a distributed motion control system is designed and achieved for the modular multi-legged robot with hand-fused foot based on CANopen network. A communication network is built among modules and joints through CANopen network. Controllers and encoders are used to achieve closed-loop control for each joint. The system has completed real-time multi-jointed linkage. Moreover, experimental results have proved the reliability and validity of this control system.

Automated Optimal Closed Loop Control System Design

2000 ◽  
Vol 33 (17) ◽  
pp. 753-758
Author(s):  
Mads B. Larsen ◽  
Torben F.H. Kristensen ◽  
Hans Holm
Keyword(s):  
Control System ◽  
System Design ◽  
Closed Loop ◽  
Control System Design ◽  
Closed Loop Control ◽  
Loop Control ◽  
Closed Loop Control System ◽  
Loop Control System

Design of Two-Wheeled Self-Balancing Robot Control System

2014 ◽  
Vol 1044-1045 ◽  
pp. 774-777
Author(s):  
Jing Li ◽  
Wei Zhang ◽  
Bing Xu
Keyword(s):  
Control System ◽  
Angular Velocity ◽  
System Design ◽  
Robot Control ◽  
Closed Loop ◽  
Closed Loop Control ◽  
Loop Control ◽  
The Core ◽  
Balancing Robot ◽  
Attitude Sensor

The main controller STM32F103VET6 was used as the core of the system. The change of angle and angular velocity was detected by accelerometer and gyroscope built-in six axis attitude sensor MPU6050. The double closed-loop control was used to regulate the speed of DC motor JGA25-371, so as to adjust the posture of the robot. Test shows that the whole system design is simple, good stability and anti-jamming.

Combined Temperature and Force Control for Robotic Friction Stir Welding

2013 ◽  
Author(s):  
Axel Fehrenbacher ◽  
Christopher B. Smith ◽  
Neil A. Duffie ◽  
Nicola J. Ferrier ◽  
Frank E. Pfefferkorn ◽  
...  
Keyword(s):  
Control System ◽  
Force Control ◽  
Closed Loop ◽  
Interface Temperature ◽  
Closed Loop Control ◽  
Weld Quality ◽  
Loop Control ◽  
Friction Stir ◽  
Tool Position ◽  
Robotic Friction Stir Welding

The objective of this research is to develop a closed-loop control system for robotic friction stir welding (FSW) that simultaneously controls force and temperature in order to maintain weld quality under various process disturbances. FSW is a solid-state joining process enabling welds with excellent metallurgical and mechanical properties, as well as significant energy consumption and cost savings compared to traditional fusion welding processes. During FSW, several process parameter and condition variations (thermal constraints, material properties, geometry, etc.) are present. The FSW process can be sensitive to these variations, which are commonly present in a production environment; hence, there is a significant need to control the process to assure high weld quality. Reliable FSW for a wide range of applications will require closed-loop control of certain process parameters. A linear multi-input-multi-output process model has been developed that captures the dynamic relations between two process inputs (commanded spindle speed and commanded vertical tool position) and two process outputs (interface temperature and axial force). A closed-loop controller was implemented that combines temperature and force control on an industrial robotic FSW system. The performance of the combined control system was demonstrated with successful command tracking and disturbance rejection. Within a certain range, desired axial forces and interface temperatures are achieved by automatically adjusting the spindle speed and the vertical tool position at the same time. The axial force and interface temperature is maintained during both thermal and geometric disturbances and thus weld quality can be maintained for a variety of conditions in which each control strategy applied independently could fail.

scholarly journals Closed-loop control system for well-defined oxygen supply in micro-physiological systems

2017 ◽  
Vol 3 (2) ◽  
pp. 363-366
Author(s):  
Tobias Steege ◽  
Mathias Busek ◽  
Stefan Grünzner ◽  
Andrés Fabían Lasagni ◽  
Frank Sonntag
Keyword(s):  
Control System ◽  
Oxygen Supply ◽  
Closed Loop ◽  
Microfluidic System ◽  
Closed Loop Control ◽  
Loop Control ◽  
Cell Vitality ◽  
Closed Loop Control System ◽  
Loop Control System

AbstractTo improve cell vitality, sufficient oxygen supply is an important factor. A deficiency in oxygen is called Hypoxia and can influence for example tumor growth or inflammatory processes. Hypoxia assays are usually performed with the help of animal or static human cell culture models. The main disadvantage of these methods is that the results are hardly transferable to the human physiology. Microfluidic 3D cell cultivation systems for perfused hypoxia assays may overcome this issue since they can mimic the in-vivo situation in the human body much better. Such a Hypoxia-on-a-Chip system was recently developed. The chip system consists of several individually laser-structured layers which are bonded using a hot press or chemical treatment. Oxygen sensing spots are integrated into the system which can be monitored continuously with an optical sensor by means of fluorescence lifetime detection.Hereby presented is the developed hard- and software requiered to control the oxygen content within this microfluidic system. This system forms a closed-loop control system which is parameterized and evaluated.

Adaptive synchronization of uncertain fractional-order chaotic systems using sliding mode control techniques

2019 ◽  
Vol 234 (1) ◽  
pp. 3-9 ◽  
Author(s):  
Bahram Yaghooti ◽  
Ali Siahi Shadbad ◽  
Kaveh Safavi ◽  
Hassan Salarieh
Keyword(s):  
Control System ◽  
Sliding Mode Control ◽  
Fractional Order ◽  
Chaotic Systems ◽  
Closed Loop ◽  
Sliding Mode ◽  
Closed Loop Control ◽  
Loop Control ◽  
Closed Loop Control System ◽  
Loop Control System

In this article, an adaptive nonlinear controller is designed to synchronize two uncertain fractional-order chaotic systems using fractional-order sliding mode control. The controller structure and adaptation laws are chosen such that asymptotic stability of the closed-loop control system is guaranteed. The adaptation laws are being calculated from a proper sliding surface using the Lyapunov stability theory. This method guarantees the closed-loop control system robustness against the system uncertainties and external disturbances. Eventually, the presented method is used to synchronize two fractional-order gyro and Duffing systems, and the numerical simulation results demonstrate the effectiveness of this method.

Sign in / Sign up

Export Citation Format

Share Document