Application of Mathematical Morphology Filter in Non-Stationary Signal of the Spindle Dynamic Balance Regulator Online Adjustment Process

2013 ◽  
Vol 443 ◽  
pp. 150-154
Author(s):  
Zheng Bang Hu ◽  
Dong Sheng Zhang ◽  
Mu Xun Xu ◽  
Tao Tao
Keyword(s):  
Fourier Transform ◽  
Mathematical Morphology ◽  
Dynamic Balance ◽  
Vibration Signal ◽  
Adjustment Process ◽  
Short Time Fourier Transform ◽  
Spindle Vibration ◽  
Non Stationary Signal ◽  
Short Time ◽  
Morphology Filter

The signal which is generated by the dynamic balance regulator for unbalanced spindle in the process of adjustment, having strong nonstationarity. The traditional signal processing methods could not deal with these signals, but also could not express the processing of signal changes. Aiming at the problem, a method combining mathematical morphology filter and the short-time Fourier transform is applied in the non-stationary signal processing in this paper. Using mathematical morphology filter could reduce the noise of spindle vibration signal, and improve the SNR. The amplitude of spindle vibration signal could be got by means of short-time Fourier transform method. Utilized the method proposed in this paper, non-stationary signal of the spindle dynamic balance regulator online adjustment process has been analysed, the results of the experiment show the feasibility of the method.

scholarly journals Application of Choi—Williams Reduced Interference Time Frequency Distribution to Machinery Diagnostics

1995 ◽  
Vol 2 (6) ◽  
pp. 437-444 ◽  
Author(s):  
Howard A. Gaberson
Keyword(s):  
Fourier Transform ◽  
Vibration Signal ◽  
Test Cases ◽  
Short Time Fourier Transform ◽  
Vibration Signals ◽  
Time Frequency ◽  
Machinery Diagnostics ◽  
Short Time ◽  
Amplitude And Frequency Modulation ◽  
Time Frequency Distribution

This article discusses time frequency analysis of machinery diagnostic vibration signals. The short time Fourier transform, the Wigner, and the Choi–Williams distributions are explained and illustrated with test cases. Examples of Choi—Williams analyses of machinery vibration signals are presented. The analyses detect discontinuities in the signals and their timing, amplitude and frequency modulation, and the presence of different components in a vibration signal.

scholarly journals A Study of Parameters Setting of the STADZT

10.14311/1654 ◽  
2012 ◽  
Vol 52 (5) ◽  
Author(s):  
Václav Turoň
Keyword(s):  
Spectral Analysis ◽  
Fourier Transform ◽  
Frequency Resolution ◽  
Short Time Fourier Transform ◽  
Time Frequency ◽  
Stationary Signals ◽  
Zolotarev Polynomials ◽  
Non Stationary Signal ◽  
Short Time ◽  
Main Influence

This paper deals with the new time-frequency Short-Time Approximated Discrete Zolotarev Transform (STADZT), which is based on symmetrical Zolotarev polynomials. Due to the special properties of these polynomials, STADZT can be used for spectral analysis of stationary and non-stationary signals with the better time and frequency resolution than the widely used Short-Time Fourier Transform (STFT). This paper describes the parameters of STADZT that have the main influence on its properties and behaviour. The selected parameters include the shape and length of the segmentation window, and the segmentation overlap. Because STADZT is very similar to STFT, the paper includes a comparison of the spectral analysis of a non-stationary signal created by STADZT and by STFT with various settings of the parameters.

scholarly journals Analysis of adaptive short-time Fourier transform-based synchrosqueezing transform

2020 ◽  
Vol 19 (01) ◽  
pp. 71-105 ◽  
Author(s):  
Haiyan Cai ◽  
Qingtang Jiang ◽  
Lin Li ◽  
Bruce W. Suter
Keyword(s):  
Fourier Transform ◽  
Theoretical Analysis ◽  
Instantaneous Frequency ◽  
Frequency Estimation ◽  
Short Time Fourier Transform ◽  
Instantaneous Frequency Estimation ◽  
Time Frequency ◽  
Synchrosqueezing Transform ◽  
Non Stationary Signal ◽  
Short Time

Recently, the study of modeling a non-stationary signal as a superposition of amplitude and frequency-modulated Fourier-like oscillatory modes has been a very active research area. The synchrosqueezing transform (SST) is a powerful method for instantaneous frequency estimation and component separation of non-stationary multicomponent signals. The short-time Fourier transform-based SST (FSST) reassigns the frequency variable to sharpen the time-frequency representation and to separate the components of a multicomponent non-stationary signal. Very recently the FSST with a time-varying parameter, called the adaptive FSST, was introduced. The simulation experiments show that the adaptive FSST is very promising in instantaneous frequency estimation of the component of a multicomponent signal, and in accurate component recovery. However, the theoretical analysis of the adaptive FSST has not been carried out. In this paper, we study the theoretical analysis of the adaptive FSST and obtain the error bounds for the instantaneous frequency estimation and component recovery with the adaptive FSST and the second-order adaptive FSST.

scholarly journals Strain Sensitivity Enhancement of Broadband Ultrasonic Signals in Plates Using Spectral Phase Filtering

2021 ◽  
Vol 11 (6) ◽  
pp. 2582
Author(s):  
Lucas M. Martinho ◽  
Alan C. Kubrusly ◽  
Nicolás Pérez ◽  
Jean Pierre von der Weid
Keyword(s):  
Fourier Transform ◽  
Guided Waves ◽  
Strain Level ◽  
Energy Concentration ◽  
Short Time Fourier Transform ◽  
Time Frequency ◽  
Frequency Representation ◽  
The Fourier Transform ◽  
Short Time ◽  
Sensitivity Gain

The focused signal obtained by the time-reversal or the cross-correlation techniques of ultrasonic guided waves in plates changes when the medium is subject to strain, which can be used to monitor the medium strain level. In this paper, the sensitivity to strain of cross-correlated signals is enhanced by a post-processing filtering procedure aiming to preserve only strain-sensitive spectrum components. Two different strategies were adopted, based on the phase of either the Fourier transform or the short-time Fourier transform. Both use prior knowledge of the system impulse response at some strain level. The technique was evaluated in an aluminum plate, effectively providing up to twice higher sensitivity to strain. The sensitivity increase depends on a phase threshold parameter used in the filtering process. Its performance was assessed based on the sensitivity gain, the loss of energy concentration capability, and the value of the foreknown strain. Signals synthesized with the time–frequency representation, through the short-time Fourier transform, provided a better tradeoff between sensitivity gain and loss of energy concentration.

An efficient short-time Fourier transform algorithm for grinding wheel condition monitoring through acoustic emission

2021 ◽  
Vol 113 (1-2) ◽  
pp. 585-603
Author(s):  
Wenderson N. Lopes ◽  
Pedro O. C. Junior ◽  
Paulo R. Aguiar ◽  
Felipe A. Alexandre ◽  
Fábio R. L. Dotto ◽  
...  
Keyword(s):  
Acoustic Emission ◽  
Fourier Transform ◽  
Condition Monitoring ◽  
Grinding Wheel ◽  
Short Time Fourier Transform ◽  
Short Time

Fourier Transform and Short-Time Fourier Transform Decomposition for Photovoltaic Arc Fault Detection

2020 ◽  
Author(s):  
Rahul Balamurugan ◽  
Fatima Al-Janahi ◽  
Oumaima Bouhali ◽  
Sawsan Shukri ◽  
Kais Abdulmawjood ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Fault Detection ◽  
Short Time Fourier Transform ◽  
Short Time
Sign in / Sign up

Export Citation Format

Share Document