Design of Wireless Fire Detection and Alarm System Based on ZigBee Technology

2013 ◽  
Vol 448-453 ◽  
pp. 3662-3665
Author(s):  
Bo Chen ◽  
Ze Hu ◽  
Liang Ge ◽  
Jun Lan Li
Keyword(s):  
High Efficiency ◽  
Fire Detection ◽  
Alarm System ◽  
Wireless Data ◽  
Zigbee Technology ◽  
Wireless Data Acquisition ◽  
Temperature Detection ◽  
Fire Alarm System ◽  
Transceiver Module ◽  
Data Acquisition Module

In order to transmit temperature and smoke signals timely and accurately in the fire alarm system of community, design one kind of wireless fire detection and alarm system, which is based on the wireless communication technology, ZigBee. When acquisition module receive the signals which come from the wireless data acquisition module which connected the room with temperature detection module, and then, send to the nearest backbone transceiver module, the defined center module receive the signals, at last, the signals are local-stored or transferred to fire center by GPRS. This design with the characters of low price, high efficiency and reliable, has a certain market.

A Study of Remote Monitoring Fire Alarm System Based on Internet of Things

2014 ◽  
Vol 977 ◽  
pp. 330-333
Author(s):  
Qi Lin Hao ◽  
Ping Xian Yang ◽  
Ming Jie Wang ◽  
Rui Ma
Keyword(s):  
Remote Monitoring ◽  
Data Transmission ◽  
Short Distance ◽  
Alarm System ◽  
Transmission Network ◽  
Wireless Data ◽  
Fire Alarm ◽  
Fire Monitoring ◽  
Wireless Data Transmission ◽  
Fire Alarm System

In this paper, in order to achieve real-time remote monitoring of fire site, we designed a intelligent remote fire monitoring system based on ZigBee network and GPRS network. This system, used ZigBee and sensor to build data acquisition and short distance transmission network and combined with GPRS wireless data transmission and SMS alarm ,cooperates with the server and PC to build a remote monitoring scheme based on GRPS.

An analog front-end of a fire detection SoC for a fire alarm system

2008 ◽  
Author(s):  
Jimin Cheon ◽  
Inhee Lee ◽  
Jeonghwan Lee ◽  
Youngcheol Chae ◽  
Gunhee Han ◽  
...  
Keyword(s):  
Fire Detection ◽  
Alarm System ◽  
Fire Alarm ◽  
Front End ◽  
Analog Front End ◽  
Fire Alarm System

scholarly journals Analysis of power requirement of a small-sized tracked-tractor during agricultural field operations

2021 ◽  
Vol 924 (1) ◽  
pp. 012017
Author(s):  
M Ali ◽  
M N Islam ◽  
M N Reza ◽  
J G Hong ◽  
M A Gulandaz ◽  
...  
Keyword(s):  
High Efficiency ◽  
Average Power ◽  
Agricultural Field ◽  
Wireless Data ◽  
Data Logger ◽  
Power Requirement ◽  
Land Leveling ◽  
Female Farmers ◽  
Sensor Signals ◽  
Data Acquisition Module

Abstract A low-powered and high-efficiency electric tracked-tractor would be a suitable option for aged and female farmers to accomplish agricultural field operations such as grass mowing, land leveling, and chemical spraying. The purpose of the study was to analyze the power requirement of a small-sized tracked-tractor during agricultural field operations. A lawnmower and a rear sprayer-trailer were attached to the tractor base, and the average power requirement was measured. The forward speed was considered during the field experiment up to 6 km/h for four different operating stages. The torque data were obtained for unloaded and loaded conditions through a wireless data logger, and a GPS receiver was used to measure the working speed of the tractor. A data acquisition module was used to acquire the sensor signals. The average power requirements for the empty platform with the driver, a lawnmower, a sprayer-trailer (150-L payload), and a lawnmower and 150-L payload trailer were 0.93, 1.27, 1.45, and 1.70 kW, respectively. The result showed the lowest power was required for operating only the tractor, and it was about 51.15% of the motor rated power, where the maximum power consumed approximately 85% of the total rated power to operate both of the lawnmower and sprayer-trailer. The average power requirements of the tracked tractor varied due to the different payloads and operating stages. The experimental results presented in this study would provide guidelines to improve and commercialize the prototype of the small-scaled tracked-tractor for practical use on the agricultural fields.

Wireless Data Acquisition Module Design Based on ATmega16

2011 ◽  
Vol 48-49 ◽  
pp. 1363-1367
Author(s):  
Zeng Shou Dong ◽  
Yue Jun Hao ◽  
Ren Wang Song ◽  
Jian Chao Zeng
Keyword(s):  
Data Acquisition ◽  
Real Time ◽  
Hydraulic System ◽  
Time Limit ◽  
Wireless Transmission ◽  
Wireless Data ◽  
Module Design ◽  
Wireless Data Acquisition ◽  
Data Acquisition Module

This paper designs a failure signal remote collection terminal based on engineering mechanical hydraulic system. The terminal takes ATmega16 microcontroller as control core, using BenQ M22A module for GPRS wireless transmission. It overcomes region and time limit of engineering machinery and monitors engineering machinery's running status at any real-time, provides the basis for engineering machinery's breakdown service.

scholarly journals GSM Based SMS Alert Fire Alarm System

2021 ◽  
Vol 9 (11) ◽  
pp. 957-962
Author(s):  
Dr. Aziz Makandar
Keyword(s):  
Detection System ◽  
Fire Detection ◽  
Cost Effective ◽  
Alarm System ◽  
Fire Alarm ◽  
Alarm Systems ◽  
Lcd Display ◽  
Fire Alarm System ◽  
Smoke Sensor ◽  
Fire Accidents

Abstract: The design of a fire alarm with Arduino-based system by means of GSM Module. The work purposely for house safety where the main point is to avoid the fire accidents occurred to the residents and the properties inside the house. In order to prevent losses accrued from fire accidents, various alarm systems have been developed such as smoke detectors, temperature sensor based systems etc. The design and implementation of a cost effective and reliable GSM based SMS Alert fire alarm system. The device will be able to monitor the temperature of the environment, the smoke level, send SMS alert to an inbuilt GSM number. When the system detects the temperature of 100C or more, it will immediately display an alert notification on LCD display and simultaneously sending an SMS alert to the users upon the high raise temperature in the house. This fire detection system consists of a smoke sensor, buzzer, LCD display and GSM module is interfaced with Arduino board. Keywords: Smoke sensor, GSM Module, Arduino, LED display, Buzzer

Sign in / Sign up

Export Citation Format

Share Document