Research on Gray-Box Testing Methods for Software Fault Injection

2014 ◽  
Vol 543-547 ◽  
pp. 3360-3363
Author(s):  
Xiao Qi Xing ◽  
Bin Liu ◽  
Dong Yi Ling
Keyword(s):  
Fault Injection ◽  
Injection Technique ◽  
Test Coverage ◽  
System Function ◽  
Testing Methods ◽  
Testing Technique ◽  
Injection Process ◽  
Process Framework ◽  
Software Fault ◽  
Function Module

Because of various advantages of software, implemented system function is more and more through software. In order to ensure the system is running, the verification of fault-oriented processing function module need software fault injected techniques to support. The traditional software fault injection technique method mainly studies the injection achievement of various fault modes. In order to achieve better test coverage, it is necessary to analyze software fault related needs and structure. Therefore, this paper combined gray box testing methods and software fault injection technique, it is proposed gray-box testing technique oriented to software fault injection, and give fault injection process framework.

A Manual Diagnosis Approach Using Targeted Fault Injection and Fault Simulation to Extend ATPG Diagnostic Resolution in Localizing Faults

2019 ◽  
Author(s):  
Rommel Estores ◽  
Karo Vander Gucht
Keyword(s):  
Fault Injection ◽  
Fault Simulation ◽  
Fault Localization ◽  
Pattern Generation ◽  
Test Coverage ◽  
Actual Case ◽  
Electrical Failure ◽  
Starting Point ◽  
Diagnostic Resolution ◽  
Diagnosis Approach

Abstract This paper discusses a creative manual diagnosis approach, a complementary technique that provides the possibility to extend Automatic Test Pattern Generation (ATPG) beyond its own limits. The authors will discuss this approach in detail using an actual case – a test coverage issue where user-generated ATPG patterns and the resulting ATPG diagnosis isolated the fault to a small part of the digital core. However, traditional fault localization techniques was unable to isolate the fault further. Using the defect candidates from ATPG diagnosis as a starting point, manual diagnosis through fault Injection and fault simulation was performed. Further fault localization was performed using the ‘not detected’ (ND) and/or ‘detected’ (DT) fault classes for each of the available patterns. The result has successfully deduced the defect candidates until the exact faulty net causing the electrical failure was identified. The ability of the FA lab to maximize the use of ATPG in combination with other tools/techniques to investigate failures in detail; is crucial in the fast root cause determination and, in case of a test coverage, aid in having effective test screen method implemented.

Transforming Water Injection Process With Real Time Automation

2021 ◽  
Author(s):  
Muhammad Zakwan Mohd Sahak ◽  
Eugene Castillano ◽  
Tengku Amansyah Tuan Mat ◽  
Maung Maung Myo Thant
Keyword(s):  
Oil Recovery ◽  
Capital Investment ◽  
Water Injection ◽  
Optimal Operation ◽  
Near Miss ◽  
Injection System ◽  
Injection Technique ◽  
Manual Operation ◽  
Injection Process ◽  
Oil Rim

Abstract For mature fields, water injection is one of the widely deployed techniques to ensure continuous oil recovery from the reservoir by maintaining the reservoir pressure, oil rim and pushing the oil from injection to production wells. Thus, it is critical to ensure a continuous and reliable operation of water injection to have consistent and sustainable rate. This paper demonstrates the new approach, utilizing automation and digital technology providing operational improvement and reduction in unplanned production deferment (UPD). One of the methods to effectively manage the water injection operation is via automation of injection process, especially since most of the water injection facilities still rely heavily on manual operation. First, a discussion on typical water injection technique is discussed. Challenges and sub-optimal operation of water injection processes within the company and industry are analysed. Then, the designing of a fully automated water injection system, such as equipment availability and constraints in matching and responding to well injection requirement are demonstrated. While an immediate adoption of process automation to mature assets may be faced with challenges such as system readiness, hardware availability, capital investment and mindset change, a step-by-step approach such as guided operation and semi-auto operation is explored as preparation prior to a full automation roll-out. With the shift from manual operation reliance to automation, the response time to process changes is improved leading to reduction in near-miss and trip cases, and minimum unplanned deferment.

Software Fault Injection Tool

2005 ◽  
Author(s):  
P.K. Tapadiya ◽  
D.R. Avresky
Keyword(s):  
Fault Injection ◽  
Software Fault

Computing reliability: On the differences between software testing and software fault injection techniques

2017 ◽  
Vol 50 ◽  
pp. 102-112 ◽  
Author(s):  
Maha Kooli ◽  
Firas Kaddachi ◽  
Giorgio Di Natale ◽  
Alberto Bosio ◽  
Pascal Benoit ◽  
...  
Keyword(s):  
Software Testing ◽  
Fault Injection ◽  
Injection Techniques ◽  
Software Fault

381 PRODUCTION OF A TRANSGENIC PIGLET BY A NEW SPERM INJECTION TECHNIQUE

2006 ◽  
Vol 18 (2) ◽  
pp. 297
Author(s):  
H. Y. Yong ◽  
C. Murphy ◽  
A. Rieke ◽  
L. Lai ◽  
Y. Hao ◽  
...  
Keyword(s):  
Zona Pellucida ◽  
Fluorescent Protein ◽  
Injection Technique ◽  
Motile Sperm ◽  
Gfp Expression ◽  
Injection Process ◽  
Development In Vitro ◽  
Green Fluorescent ◽  
Triton X

The technique for intracytoplasmic sperm injection (ICSI) has, until now, focused on scoring the tail of the sperm prior to catching and aspiration into the injection pipette. This is in spite of the fact that damage to the head would more closely simulate what occurs during normal fertilization. In addition, to aid in visualizing the injection process so that a reduced volume can be injected, the oocyte is generally centrifuged to clear a portion of the cytoplasm. Thus, with conventional ICSI, the sperm are immobilized with polyvinylpyrrolidone, repeatedly frozen and thawed, treated with DTT or Triton X-100, and severed between the head and tail; the oocyte is centrifuged or activated. All of the above treatments are designed to compensate for the intrinsic defects in conventional ICSI. Our objective was to use a modified ICSI procedure whereby aggressively motile sperm were captured onto the broken tip of an injection pipette and then injected into noncentrifuged oocytes. Damage to the head of the sperm occurred on the pipette or while pushed through the zona pellucida. These procedures are based on the work of Yong et al. 2003 Hum. Reprod. 18, 2390, where they achieved an improvement in development in vitro as compared to conventional methods. Ovaries were collected from prepubertal gilts, and oocytes were aspirated and matured in vitro. Sperm were collected from a transgenic boar carrying the green fluorescent protein (GFP) and frozen. After thawing, aggressively motile sperm were captured and injected through the zona pellucida and into the cytoplasm of the in vitro-matured oocytes. A total of 452 injected oocytes (43-171 oocytes per recipient) were surgically transferred into the oviduct of six surrogate gilts. Two gilts (33%) became pregnant. One gave birth to a healthy male piglet. GFP expression was observed in the nose and hooves by direct epifluorescent examination of the newborn piglet. This pattern of GFP expression is identical to that in non-ICSI-derived GFP pigs in this line. This result showed for the first time that this new sperm injection technique could be used for production of a viable transgenic piglet using in vitro-matured oocytes and frozen-thawed sperm.

Sign in / Sign up

Export Citation Format

Share Document