Seismic Behavior Factor of Moment Resisting Steel Frame-Steel Plate Shear Wall

2014 ◽  
Vol 638-640 ◽  
pp. 1932-1936 ◽  
Author(s):  
Jian Hua Shao ◽  
Qun Wu
Keyword(s):  
Seismic Behavior ◽  
Steel Plate ◽  
Shear Wall ◽  
Reduction Factor ◽  
Steel Frame ◽  
Steel Plate Shear Wall ◽  
Behavior Factor ◽  
Drift Ratio ◽  
Story Drift ◽  
Moment Resisting

The seismic behavior factor of moment resisting steel frame-steel plate shear wall under two different horizontal loading patterns was investigated according to the maximum inter-story drift ratio reaching 1/50. It could be achieved with the same calculated standard as the foreign codes and the determined behavior factor was compared with foreign research results. The method using the software SAP2000 to calculate seismic behavior factor according to the maximum inter-story drift ratio reaching 1/50 was presented and the specific example was used to elaborate the operating process. The seismic behavior factor R, the overstrength factor RΩ and the ductility reduction factor Rμ of 10-storey 3-span steel frame-steel plate shear wall under the inverted triangle load are respectively 6.07, 2.96 and 2.05. while they are respectively 7.2, 3.37 and 2.13 under the uniform load. Finally, it can be concluded that the economic and reasonable design goals are achieved for this structure.

Seismic Performance Evaluation of Steel Frame-Steel Plate Shear Wall Using Pushover and IDA

2014 ◽  
Vol 578-579 ◽  
pp. 354-358
Author(s):  
Jian Hua Shao ◽  
Bai Jie Tang
Keyword(s):  
Uniform Distribution ◽  
Seismic Performance ◽  
Seismic Behavior ◽  
Steel Plate ◽  
Pushover Analysis ◽  
Shear Wall ◽  
Steel Frame ◽  
Base Shear ◽  
Steel Plate Shear Wall ◽  
Loading Modes

Based on the time-history analysis principle of bidirectional equivalent tension rod of steel shear wall in this paper, the theory of Incremental Dynamic Analysis (IDA) is used to investigate the real seismic behavior of steel frame-steel plate shear wall (SPSW) system under a large number of natural earthquake waves and artificial simulated earthquake waves with the gradually increased scale of seismic intensity in order to achieve the base shear-roof displacement (V-Δ) curve under each earthquake wave action. Based on the principle of unidirectional equivalent tension rod, the pushover analysis is also used to obtain the curve of base shear and roof displacement under two different loading modes of uniform distribution and inverted triangular distribution. Through the above two different methods of seismic behavior evaluation, the achieved conclusions are as follows: The most V-Δ envelope curves obtained by IDA analysis are between V-Δ envelope curves obtained by pushover analysis under these two loading modes of inverted triangular and uniform distribution. With the increase of structural storey, the effect of high order mode on seismic behavior is more and more obvious and the deviation of calculation results derived from pushover is bigger and bigger. As a result, pushover analysis is only applied to evaluate seismic performance of structure at the middle or low storey. For the pushover, the structural bearing capacity and initial stiffness is underestimated, but the structural deformation capacity is overestimated under inverted triangular loading mode, Whereas, it is the opposite situation under the uniform distribution.

scholarly journals Seismic Behavior of RC Moment Resisting Structures with Concrete Shear Wall under Mainshock-aftershock Seismic Sequences

2021 ◽  
Author(s):  
Omid Karimzade Soureshjani ◽  
Ali Massumi
Keyword(s):  
Seismic Behavior ◽  
Shear Wall ◽  
Relative Displacement ◽  
Structure Model ◽  
Residual Displacement ◽  
Significant Growth ◽  
Seismic Sequences ◽  
Drift Ratio ◽  
Story Drift ◽  
Moment Resisting

Abstract A structure may subject to several aftershocks after a mainshock. In many seismic design provisions, the effect of the seismic sequences is not directly considered or underestimated. This paper studies the seismic behavior of RC moment-resisting structures with concrete shear wall under seismic sequences. Two three-dimensional structures of short and medium height were designed and analyzed. The former models were studied under a group of real mainshock-aftershock seismic sequences. The models were loaded and designed according to the fourth edition of the Iranian seismic code of standard no. 2800 and ACI-318 respectively. Furthermore, the non-linear dynamic time-history finite element analysis of models was performed via the explicit method. The parameters of maximum displacement, inter-story drift ratio, residual displacement, and finally the effect of the ratio of aftershock acceleration to mainshock acceleration were investigated and assessed. Due to the high lateral stiffness of shear walls, parallel with the complete elastic behavior, aftershocks cause no growth in inter-story drift ratio and relative displacement in the short structure model. In contrast, compared to the structure under the solely mainshock, the medium height structure model under seismic sequences showed significant growth in the amount of relative displacement (even more than 50% growth), inter-story drift ratio, plastic strain, and residual displacement (almost 30% growth). Furthermore, unlike the moment-resisting frame structures, models showed no significant growth in the drift ratio with the height. Assessments indicated that the ratio of aftershock to mainshock acceleration is a determinative parameter in structural behavior under seismic sequences.

Experimental research on special steel frame with stiffened double steel plate shear wall

2022 ◽  
Vol 189 ◽  
pp. 107067
Author(s):  
Zi-Qin Jiang ◽  
Tian Yan ◽  
Ai-Lin Zhang ◽  
Lei Su ◽  
Cun-Jie Shen
Keyword(s):  
Experimental Research ◽  
Steel Plate ◽  
Shear Wall ◽  
Steel Frame ◽  
Special Steel ◽  
Steel Plate Shear Wall

Literature Review of Seismic Behavior of Composite Steel Plate Shear Wall

2013 ◽  
Vol 671-674 ◽  
pp. 1408-1413
Author(s):  
Ning Zhou ◽  
Feng Xiong ◽  
Qun Yi Huang ◽  
Qi Ge ◽  
Jiang Chen
Keyword(s):  
Seismic Behavior ◽  
Steel Plate ◽  
Concrete Slab ◽  
Shear Wall ◽  
Lateral Force ◽  
Steel Plates ◽  
Steel Plate Shear Wall ◽  
Existing Problems ◽  
Energy Dissipation Capacity ◽  
Composite Steel

Composite steel plate shear wall (CSPSW), as a new lateral force resisting structure composed of steel plate and concrete slab, is introduced. CSPSWs can fully display the superiority of the steel plate and concrete. Ductility and energy dissipation capacity of the walls are increased and seismic behavior is improved. Recent seismic research around the word of two kinds of CSPSWs, namely, CSPSW with signal steel plate and CSPSW with double steel plates, is presented and discussed comprehensively. Some existing problems in current research of the walls are also reviewed in this paper.

Sign in / Sign up

Export Citation Format

Share Document