Design and Experimental Research of Automatic Control System of Material Transport Car Based on Siemens S7-300 PLC

2014 ◽  
Vol 703 ◽  
pp. 277-280
Author(s):  
Hao Wang ◽  
Xiu Zhong Li ◽  
Wei Yang ◽  
Xiao Chu Liu ◽  
Quan Peng He
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Simulation Analysis ◽  
System Response ◽  
Material Transport ◽  
Relay Control ◽  
Cleaning Equipment ◽  
Automatic Positioning ◽  
Time Relay

Aiming to the problem of the traditional relay control system, such as high failure rate, low precision control, complex installation, slow system response, etc ,which caused by the extensive uses of intermediate relay, time relay, counter and other devices in the system, this paper provides a design of an automatic control system which integrates automatic positioning, automatic feeding, automatic cleaning equipment based on siemens S7-300 PLC instead of the traditional relay control system and carry out simulation analysis by PLCSIM software, compared with the material transport car model motion excellent to verify the rationality of the control system design.

Research on Closed-Loop Control Algorithm of Pneumatic Clutch Based on Optimizing Engaged - Schedule

2014 ◽  
Vol 509 ◽  
pp. 213-217
Author(s):  
Xing Zhong Li ◽  
Yu Long Lei ◽  
Shao Hua Sun
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Control Algorithm ◽  
Simulation Analysis ◽  
Test Scheme ◽  
Loop Control ◽  
Stand Test ◽  
Clutch Engagement

According to the automatic control system of pneumatic AMT clutch, this paper proposes a novel PID control based on logical switch of clutch engagement index. The PWM control is used to make a control for the solenoid valve. And a controller is established by this control algorithm. The automatic control system of pneumatic AMT clutches modeling using the AMEsim software, related simulation analysis and modifying the control parameters of the controller. It is conducted stand test according to the test scheme for the clutch automatic control system. And the test data is record and made an analysis on. The control algorithm is verified by stand test, greatly improving the bonding quality of the clutch.

Investigation of the stability of periodic motions in a nonlinear automatic control system based on the fast fourier transform

2003 ◽  
Vol 3 ◽  
pp. 297-307
Author(s):  
V.V. Denisov
Keyword(s):  
Fourier Transform ◽  
Control System ◽  
Automatic Control ◽  
Fast Fourier Transform ◽  
Automatic Control System ◽  
Resonance Phenomenon ◽  
Periodic Motions ◽  
Multiply Connected ◽  
Non Linear ◽  
The Stability

An approach to the study of the stability of non-linear multiply connected systems of automatic control by means of a fast Fourier transform and the resonance phenomenon is considered.

scholarly journals Results of Laboratory Studies of the Automated Sorting System for Root and Onion Crops

Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1257
Author(s):  
Alexey Dorokhov ◽  
Alexander Aksenov ◽  
Alexey Sibirev ◽  
Nikolay Sazonov ◽  
Maxim Mosyakov ◽  
...  
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Technological Parameters ◽  
Post Harvest ◽  
Manual Sorting ◽  
Sorting System ◽  
Working Bodies ◽  
Automatic Removal

The roller and sieve machines most commonly used in Russia for the post-harvest processing of root and tuber crops and onions have a number of disadvantages, the main one being a decrease in the quality of sorting due to the contamination of working bodies, which increases the quantity of losses during sorting and storage. To obtain high-quality competitive production, it is necessary to combine a number of technological operations during the sorting process, such as dividing the material into classes and fractions by quality and size, as well as identifying and removing damaged products. In order to improve the quality of sorting of root tubers and onions by size, it is necessary to ensure the development of an automatic control system for operating and technological parameters, the use of which will eliminate manual sorting on bulkhead tables in post-harvest processing. To fulfill these conditions, the developed automatic control system must have the ability to identify the material on the sorting surface, taking into account external damage and ensuring the automatic removal of impurities. In this study, the highest sorting accuracy of tubers (of more than 91%) was achieved with a forward speed of 1.2 m/s for the conveyor of the sorting table, with damage to 2.2% of the tubers, which meets the agrotechnical requirements for post-harvest processing. This feature distinguishes the developed device from similar ones.

scholarly journals Stability study of digital multi-connected automatic control system

2021 ◽  
Vol 1864 (1) ◽  
pp. 012039
Author(s):  
B. G. Ilyasov ◽  
G.A. Saitova ◽  
A.V. Elizarova
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Stability Study
Sign in / Sign up

Export Citation Format

Share Document