scholarly journals Electricity Production from Organic Wastes Fermentation by Microbial Fuel Cell Process

2016 ◽  
Vol 855 ◽  
pp. 91-97
Author(s):  
Piyarut Moonsri ◽  
Wilaiporn Pongpian ◽  
Prayak Juantrong
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Current Density ◽  
Electricity Generation ◽  
Nutrient Content ◽  
Organic Wastes ◽  
Electricity Production ◽  
Copper Metal ◽  
Potential Density

This research studied the electricity production from organic wastes fermentation by microbial fuel cell by using a single chamber microbial fuel cell (SCMFC). Two sizes (1 L and 10 L) of simple SCMFC were fabricated by using a cylindrical plastic tank which anode compartment and cathode compartment separated by plastic plate with hole and covered with cotton fabric. The anode electrode contacted with organic matter and microorganisms where anaerobic reaction occurred to generate electron and proton. The electrons transferred through an external circuit while the protons diffused through the solution to the cathode electrode for reducing oxygen to water. From the study of the effect of different electrode types (carbon graphite rod, zinc metal, and copper metal) to the electricity generation using the SCMFC size 1 L in fermentation with synthetic sweetness solution (22%Brix) and the effective microorganism (EM) for 36 hrs, it found that the fuel cell which used copper metal as electrode produced electricity increasing over the times and has more efficient than the other electrode types. The study of electricity generation from organic waste fermentation by using the SCMFC size 10 L and using copper metal as electrode, the results showed that the fermentation of pineapple waste produced the current density, potential density, and power density higher than the fermentation of bananas and the fermentation of food garbage with EM. An optimal period of time for the production of electricity from this microbial fuel cell is the first five days of fermentation that the cells has voltage »500 mV, the current density 25.52 mA m-2, potential density 104.69 V m-2 and power density 12.59 mW m-2, and then decline over time five days (120 hrs). Moreover the bio-liquid fertilizer and the residues from the fermentation can be further used in agricultural because of the nutrient content (N, P, K), organic carbon and organic material contents available.

Microbial Fuel Cell for Sustainable Electricity Production from Seafood Wastewater

2012 ◽  
Vol 232 ◽  
pp. 812-815
Author(s):  
Hong Liang Sun ◽  
Hong Bin Lv ◽  
Wen Jing Nie
Keyword(s):  
Fuel Cell ◽  
Molecular Oxygen ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Electricity Generation ◽  
Electricity Production ◽  
Aerobic Respiration ◽  
Maximum Power Density ◽  
Substrate Conversion ◽  
Sustainable Electricity

To make the treatment of seafood wastewater more economical and sustainable, this study aims to examine electricity generation from seafood wastewater in MFC reactor. By supplying the MFCs with seafood wastewater, the maximum power density of 291.6 mW/m2 and CE of 20.3 % could be obtained. The substrate loss was attributed to diffusion of molecular oxygen from the cathode to the anode, which led to substrate conversion through aerobic respiration rather than electricity-producing pathway. This study provides a conceptual demonstration of seafood wastewater for electricity production using MFC technology.

scholarly journals Constructed wetland integrated microbial fuel cell system: looking back, moving forward

2017 ◽  
Vol 76 (2) ◽  
pp. 471-477 ◽  
Author(s):  
Yae Wang ◽  
Yaqian Zhao ◽  
Lei Xu ◽  
Wenke Wang ◽  
Liam Doherty ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Constructed Wetland ◽  
Electricity Generation ◽  
Flow Direction ◽  
Cell System ◽  
Electricity Production ◽  
Research Directions ◽  
Technical Issues ◽  
Infant Stage

In the last 10 years, the microbial fuel cell (MFC) has been extensively studied worldwide to extract energy from wastewater via electricity generation. More recently, a merged technique of embedding MFC into a constructed wetland (CW) has been developed and appears to be increasingly investigated. The driving force to integrate these two technologies lies in the fact that CWs naturally possess a redox gradient (depending on flow direction and wetland depth), which is required by MFCs as anaerobic anode and aerobic cathode chambers. No doubt, the integration of MFC with a CW will upgrade the CW to allow it to be used for wastewater treatment and, simultaneously, electricity generation, making CWs more sustainable and environmentally friendly. Currently, published work shows that India, China, Ireland, Spain, Germany and Malaysia are involved in the development of this technology although it is in its infant stage and many technical issues are faced on system configuration, operation and maximisation of electricity production. This paper aims to provide an updated review and analysis of the CW-MFC development. Focuses are placed on the experience gained so far from different researchers in the literature and further research directions and proposals are discussed in great detail.

scholarly journals Energy Harvesting from Sugarcane Bagasse Juice using Yeast Microbial Fuel Cell Technology

REAKTOR ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 52-58
Author(s):  
Marcelinus Christwardana ◽  
Linda Aliffia Yoshi ◽  
J. Joelianingsih
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Sugarcane Bagasse ◽  
Current Density ◽  
Sugar Content ◽  
Maximum Power ◽  
Biofuel Cell ◽  
Maximum Power Density ◽  
Menten Constant

This study demonstrates the feasibility of producing bioelectricity utilizing yeast microbial fuel cell (MFC) technology with sugarcane bagasse juice as a substrate. Yeast Saccharomyces cerevisiae was employed as a bio-catalyst in the production of electrical energy. Sugarcane bagasse juice can be used as a substrate in MFC yeast because of its relatively high sugar content. When yeast was used as a biocatalyst, and Yeast Extract, Peptone, D-Glucose (YPD) Medium was used as a substrate in the MFC in the acclimatization process, current density increased over time to reach 171.43 mA/m2 in closed circuit voltage (CCV), maximum power density (MPD) reached 13.38 mW/m2 after 21 days of the acclimatization process. When using sugarcane bagasse juice as a substrate, MPD reached 6.44 mW/m2 with a sugar concentration of about 5230 ppm. Whereas the sensitivity, maximum current density (Jmax), and apparent Michaelis-Menten constant (𝐾𝑚𝑎𝑝𝑝) from the Michaelis-Menten plot were 0.01474 mA/(m2.ppm), 263.76 mA/m2, and 13594 ppm, respectively. These results indicate that bioelectricity can be produced from sugarcane bagasse juice by Saccharomyces cerevisiae.Keywords: biomass valorization, biofuel cell, acclimatization, maximum power density, Michaelis-Menten constant

scholarly journals Temperature dependence of power generation of empty fruit bunch (EFB) based microbial fuel cell

2019 ◽  
Vol 15 (4) ◽  
pp. 489-491 ◽  
Author(s):  
Nazlee Faisal Ghazali ◽  
Nik Azmi Nik Mahmood ◽  
Noor Fadzilah Abu Bakar ◽  
Kamarul Asri’ Ibrahim
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Electricity Generation ◽  
Organic Waste ◽  
Emerging Technology ◽  
Electricity Production ◽  
Empty Fruit Bunch ◽  
Higher Power ◽  
Lower Temperature ◽  
Sustainable Electricity

Microbial fuel cell has been considered a new emerging technology for renewable and sustainable electricity production. The energy can be extracted from organic waste materials which time independently increase in mass. In the present study, it was demonstrated that lignocellulosic material such as empty fruit bunch (EFB) can be used to produce electricity. Clostridium cellulolyticum and Bacilli E1 were used to activate EFB degradation and electricity generation respectively.  It was also demonstrated that the present EFB based MFC was affected in terms of power produced with much higher power was obtained at 37.5 ℃ with power value of 825 ± 3.08 mW/m2 compared to 25 and 50 ℃, which produced 756 ± 1.14 mW/m2 and 345 ± 1.78 mW/m2. At elevated temperature (50 ℃) showed decrease of power density value compared to lower temperature operated MFC, which is believed to be microbial metabolism dependent 

scholarly journals Evaluvation of Paper recycling Wastewater Treatment Accompanied by power generation using Microbial Fuel Cell

2017 ◽  
Vol 19 (4) ◽  
pp. 682-686 ◽  
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Reduction Rate ◽  
Platinum Metal ◽  
Electricity Production ◽  
Metal Catalyst ◽  
Iron Phthalocyanine ◽  
Cathode Catalyst ◽  
Carbon Nano Tubes

<p>This study investigates the feasibility of using cathode catalyst (Iron phthalocyanine (FePc) combined multi walled carbon nano tubes (MWCNT) and compares the oxygen reduction rate under different conductivity of catholite solution (50 mM, 100mM) in double chamber Microbial Fuel Cell. Microbial fuel cell (MFC) research is going on for few decades to increase the power density and improve the removal efficiency. Iron phthalocyanine (FePc) combined multi walled carbon nano tubes (MWCNT) cathode catalyst showed the highest power density (9.34 w/m2) in 100 mM PBS than 50 mM (7.58 W/m2). The electrodes are characterized by scanning electron microscopy (SEM) and the electrocatylitic activity of the catalyst coated electrodes were examined by cyclic voltammetry(CV). The high power density indicates a potential alternative to precious platinum metal catalyst in treatment as well as electricity production Microbial Fuel cell.</p>

Submersible microbial fuel cell for electricity production from sewage sludge

2011 ◽  
Vol 64 (1) ◽  
pp. 50-55 ◽  
Author(s):  
Yifeng Zhang ◽  
Lola Gonzalez Olias ◽  
Prawit Kongjan ◽  
Irini Angelidaki
Keyword(s):  
Power Generation ◽  
Fuel Cell ◽  
Sewage Sludge ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Oxygen Demand ◽  
Maximum Power ◽  
Electricity Production ◽  
Maximum Power Density ◽  
Sludge Concentration

A submersible microbial fuel cell (SMFC) was utilized to treat sewage sludge and simultaneously generate electricity. Stable power generation (145 ± 5 mW/m2, 470 Ω) was produced continuously from raw sewage sludge for 5.5 days. The maximum power density reached 190 ± 5 mW/m2. The corresponding total chemical oxygen demand (TCOD) removal efficiency was 78.1 ± 0.2% with initial TCOD of 49.7 g/L. The power generation of SMFC was depended on the sludge concentration, while dilution of the raw sludge resulted in higher power density. The maximum power density was saturated at sludge concentration of 17 g-TCOD/L, where 290 mW/m2 was achieved. When effluents from an anaerobic digester that was fed with raw sludge were used as substrate in the SMFC, a maximum power density of 318 mW/m2, and a final TCOD removal of 71.9 ± 0.2% were achieved. These results have practical implications for development of an effective system to treat sewage sludge and simultaneously recover energy.

scholarly journals Electricity Production Using Plant–Microbial Fuel Cell (P-MFC)

2021 ◽  
pp. 11-25
Author(s):  
B. S. Shilpa ◽  
H. S. Dayananda ◽  
P. Girish ◽  
K. Arun Kumar ◽  
T. C. Bhoomika
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Fossil Fuels ◽  
Proton Exchange Membrane ◽  
Red Soil ◽  
Proton Exchange ◽  
Electricity Production ◽  
Plant Microbial Fuel Cell ◽  
Exchange Membrane

The current climate change threat by green house gas emissions from the combustion of fossil fuels has necessitated a search for alternative non-polluting, reliable, renewable and sustainable sources of energy such as solar energy and it’s derivatives. The present work focuses on power generation by Plant-Microbial Fuel Cell using Phragmitesaustralis (Reed plant). The plants were grown in fuel-cell, graphite as anode and carbon felt as cathode, separated by proton-exchange-membrane. During anaerobic microbial metabolism of carbohydrates in the roots, protons and electrons are released, the electrons are donated to the anode by the microbes. These electrons can be channeled through a circuit bearing a load to the cathode. In this work, carbon granules as substratum (control), red soil and carbon granules mixture (30:70) as substratum in varied condition was considered. For control substratum, the max.voltage measured was 0.327 V and power density of 2.06x10-3 mW m-2 was obtained. When red soil mixed with carbon granules in the ratio 30:70, the voltage measured was 0.6 V and the power density was found to be 3.78x10-3 mW m-2. When graded red soil (0.0018 m) mixed with carbon granules in the ratio 30:70, the voltage measured was 0.623 V and the power density was found to be 3.98x10-3 mW m-2. The result proves that the plant microbial fuel cell can be used for generating electricity and is a promising renewable energy technology.

Solar-assisted dual chamber microbial fuel cell with a CuInS2photocathode

RSC Advances ◽  
2014 ◽  
Vol 4 (45) ◽  
pp. 23790-23796 ◽  
Author(s):  
Siwen Wang ◽  
Xiaoling Yang ◽  
Yihua Zhu ◽  
Yunhe Su ◽  
Chunzhong Li
Keyword(s):  
Electron Transfer ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Current Density ◽  
Maximum Power ◽  
Maximum Power Density ◽  
Dual Chamber ◽  
A Current

A solar-assisted microbial fuel cell (MFC) was prepared with flower-like CuInS2(CIS) as the photocathode. CIS with flower flakes and monodispersity could be beneficial to electron transfer under irradiation. The solar MFC achieved a maximum power density of 0.108 mW cm−2and a current density of 0.62 mA cm−2.

Sign in / Sign up

Export Citation Format

Share Document