Design of the Control System for Fully Automatic Steel-Tube Molding Machine

2014 ◽  
Vol 1006-1007 ◽  
pp. 586-591
Author(s):  
Si Chao Tang ◽  
Jia Ming Yao ◽  
Shou Xin Zhu ◽  
Meng Sheng Wang ◽  
Jia Na Fang ◽  
...  
Keyword(s):  
Control System ◽  
Steel Tube ◽  
Molding Machine ◽  
Plc Control ◽  
Multiple Devices ◽  
Working Principle ◽  
Fully Automatic ◽  
Low Efficiency ◽  
In Transit ◽  
Designing Method

In order to develop the control system for fully automatic molding machine which runs stable, reliable and high-automatically, its operational requirements analysis are studied deeply, based on the analysis of present research and development situation on domestic and foreign molding machine, this paper analyses its mechanical structure, working principle, hydraulic system. Finally, the author designs the FX2N PLC control system and briefly describes designing method and characteristics of hardware and software, which solves the problem: the low efficiency of domestic steel automatic stacker molding, collision quality loss and coordination of multiple devices in transit.

Design of the Control System for Fully Automatic Steel-Tube Molding Machine

2014 ◽  
Author(s):  
Sichao Tang ◽  
Jiaming Yao ◽  
Shouxin Zhu ◽  
Mengsheng Wang ◽  
Jiana Fang ◽  
...  
Keyword(s):  
Control System ◽  
Steel Tube ◽  
Molding Machine ◽  
Fully Automatic

Automatic Salt Packing Control System Based on GX Developer

2011 ◽  
Vol 63-64 ◽  
pp. 1018-1021
Author(s):  
Jian Hua Ren ◽  
Wei Wang
Keyword(s):  
Control System ◽  
Salt System ◽  
Control Panel ◽  
Equipment Failure ◽  
Practical Application ◽  
Packaging System ◽  
Plc Control ◽  
Multiple Devices

In this paper, we design a typical automated packaging salt system, including multiple devices to stir, feed, packaging, weighing and other links. This requires the coordination of all sectors to achieve sequential switch, equipment failure alarming and maintenance. Therefore, salt packaging system adopts PLC control. According to different control objectives and requirements, we allocated the address reasonably; selected PLC and the modules. GX Developer software is used to programming and finally the control panel is designed. After commissioning and practical application, the effect is good, efficient, and precise.

Screen Printing Equipment Control System Design Based on PLC

2013 ◽  
Vol 415 ◽  
pp. 180-183
Author(s):  
Yun Long Yuan ◽  
Hong Cheng
Keyword(s):  
Control System ◽  
Screen Printing ◽  
Production Efficiency ◽  
Operation Mode ◽  
High Strength ◽  
Production Test ◽  
Action Execution ◽  
Plc Control ◽  
Stable Performance ◽  
Low Efficiency

For the traditional operation mode of high strength, low efficiency in the process of the plastic ruler screen printing, the powerful PLC is used as the control core, the automatic PLC control system is developed, and the reasonable programming skills are applied so that the two institutions can work in parallel, which greatly improves the production efficiency. At the same time, sophisticated sensors are used to detect each action execution state so as to ensure that work is reliable with stable performance. Through actual production test, the printing speed has reached the capacity of 28 rulers on average per minute, and has achieved the good production benefit.

Pneumatic High-Pressure Mud Pump Based on PLC Control

2014 ◽  
Vol 716-717 ◽  
pp. 1595-1598
Author(s):  
Yi Hong Xu ◽  
Chang Sheng Zhu
Keyword(s):  
High Pressure ◽  
Control System ◽  
Experimental Results ◽  
High Pressure Pump ◽  
Pressure Pump ◽  
Plc Control ◽  
Working Principle ◽  
Plc Control System

This paper proposes a design of pneumatic high-pressure mud pump based on PLC control. According to this method, we design the three-cylinder reciprocating single acting pneumatic high-pressure mud pump, and give the details of PLC control system and high-pressure pump body, finally briefly describe the working principle and the experimental results.

The Automatic Control System Applied to Food Packing Production Line Based on STEP7-MICRO/WIN

2011 ◽  
Vol 63-64 ◽  
pp. 273-276
Author(s):  
Wei Wang ◽  
Jian Hua Ren
Keyword(s):  
Control System ◽  
Food Production ◽  
Control Object ◽  
Centralized Control ◽  
Packaging System ◽  
Practical Applications ◽  
Plc Control ◽  
Multiple Devices ◽  
Programming Software

In this paper， we introduce a food production and packaging system. This system includes many processes, namely, mixing, blending, molding, drying, packaging, and relates to multiple devices. To ensure the quality of food production and packaging, it needs coordination of all procedures and controls based on process requirements to achieve different objectives, so we use PLC centralized control in the food production and packaging system. According to the control object, we allocated the PLC address and choose the PLC of Siemens S7-200. On the basis of control tasks, we designed a control flowchart and programmed for PLC control system of Siemens S7-200 using STEP7-MICRO/WIN programming software .The practical applications have proved the good results.

PLC Control System of the Stage Loader Based on Step Ladder Instruction

2012 ◽  
Vol 201-202 ◽  
pp. 442-445
Author(s):  
Xu Qin Chen ◽  
Guang Zhen Cheng
Keyword(s):  
Control System ◽  
State Transitions ◽  
Action Sequence ◽  
Electrical Control ◽  
Plc Control ◽  
Electric Control ◽  
Working Principle ◽  
Plc Program ◽  
Working Procedure ◽  
Continuous Working

The purpose of this paper is to design an electric control system of stage loader which has clear logical relations and is easy to operate. The control system improved the working reliability of electric control system. Taking stage loader used in coal storage yard as an example, we introduce the mechanical structure and working principle of stage loader, mainly discuss about the components of electric control system, the action sequence of the actuator, electrical control PLC program .This paper pointes out that the use of step ladder instruction can make logical relations of action sequence clear and the use of state initialization instruction can make the state transitions among manual program, homing procedure, automatic continuous working procedure simple.

The Study of PLC Control Technology Application in Motor VVVF System

2012 ◽  
Vol 203 ◽  
pp. 135-138
Author(s):  
Jiang Cai Liu
Keyword(s):  
Control System ◽  
Control Device ◽  
Control Technology ◽  
Industrial Control ◽  
Good Reliability ◽  
Technology Application ◽  
Dc Motors ◽  
Plc Control ◽  
Technology Applications ◽  
Working Principle

the programmable logic controller (PLC) is the control device which is the most commonly used in the industrial control system. It's popular among the control system designer and maintaining staff on account of its good reliability, anti-jamming and practical application. This paper studies the PLC control technology application in motor VVVF system, firstly we introduce the basic working principle and features of the PLC, then supply some technical guidance for the PLC control technology applications combined with DC motors and AC induction motors in PLC control system.

A Hydraulic Control System Design for Change-Wheel Garage of Light Rail Based on PLC

2012 ◽  
Vol 233 ◽  
pp. 76-79
Author(s):  
Yong Gang Yang ◽  
Jun Sun ◽  
Meng Tao Yang
Keyword(s):  
Control System ◽  
System Design ◽  
Servo Control ◽  
Light Rail ◽  
Control System Design ◽  
Hydraulic Control ◽  
Plc Control ◽  
Servo Control System ◽  
Hydraulic Servo ◽  
Hydraulic Control System

This paper introduces the hydraulic control system design for the change-wheel garage of Chongqing light rails through analysis of three-stage cylinder synchronization circuit for lifting bodies, and optimizing the design of the slewing mechanism with respect to the hydraulic servo control system of digital cylinder. The results improved the smoothness in the process of changing wheel lifting and the rotary accuracy of the rotary mechanism. Design on the PLC control system of the system is also included as part of this paper.

DEVELOPMENT OF AN ARTICULATION ROBOT ARM

2017 ◽  
Vol 41 (3) ◽  
pp. 443-455
Author(s):  
Kuo-Lan Su ◽  
Jian-Fu Weng ◽  
Jr-Hung Guo ◽  
Kai-Lu Cai
Keyword(s):  
Control System ◽  
Vision System ◽  
Motion Trajectory ◽  
Robot Arm ◽  
Plc Control ◽  
Plc Control System

This article describes the design of an articulation robot arm with seven joints. The control core of the robot arm is the module-based system built using the Mitsubishi Q series programming logical controller (PLC). The robot arm contains seven AC servomotors, seven driver devices, a vision system and a PLC control system. The PLC-based controller programs the motion trajectory of the gripper to catch or hold the objects and finish the assigned tasks. Kinect system (Asus Xtion Pro-Live, or called RGB-D sensor) acts as the vision system to recognize shape and color of each object. During the experiments, we found that the robot arm recognizes the shape and color of each object, and catches each object moving to the assigned box with the same color.

Sign in / Sign up

Export Citation Format

Share Document