Screen Printing Equipment Control System Design Based on PLC

2013 ◽  
Vol 415 ◽  
pp. 180-183
Author(s):  
Yun Long Yuan ◽  
Hong Cheng
Keyword(s):  
Control System ◽  
Screen Printing ◽  
Production Efficiency ◽  
Operation Mode ◽  
High Strength ◽  
Production Test ◽  
Action Execution ◽  
Plc Control ◽  
Stable Performance ◽  
Low Efficiency

For the traditional operation mode of high strength, low efficiency in the process of the plastic ruler screen printing, the powerful PLC is used as the control core, the automatic PLC control system is developed, and the reasonable programming skills are applied so that the two institutions can work in parallel, which greatly improves the production efficiency. At the same time, sophisticated sensors are used to detect each action execution state so as to ensure that work is reliable with stable performance. Through actual production test, the printing speed has reached the capacity of 28 rulers on average per minute, and has achieved the good production benefit.

Automation Control System of Pharmaceutical Factory Based on Wireless Sensor Network

2013 ◽  
Vol 397-400 ◽  
pp. 1271-1277
Author(s):  
Qiu Feng Shang ◽  
Lin Zhang
Keyword(s):  
Control System ◽  
Production Efficiency ◽  
Configuration Software ◽  
Plant Production ◽  
Wireless Sensor ◽  
Pharmaceutical Factory ◽  
Labview Software ◽  
Plc Control ◽  
Zigbee Technology ◽  
Automation Control

In view of the traditional wired sensing network PLC control system wiring difficulty, the equipment mobilized shortcoming, this article has designed based on the ZigBee wireless communication pharmaceutical factory automation control system. Using the ZigBee technology realization wireless sensing network, completes automatically to the plant production in various parameters monitor, the analysis, processing, automatically does not conform to the request parameter to completely or the part production process in to carry on the adjustment. This design uses the LabView software to replace the configuration software to complete the backstage the movement. Using LabView to carry on the instrument system the design, the examination and the realization, may reduce the system the development time, enhances the production efficiency. This system has the broad application prospect.

Top Charging Car Automatic Control System Based on PLC

2014 ◽  
Vol 552 ◽  
pp. 192-195
Author(s):  
Chuan Wei Zhang ◽  
Guang Fan Hu ◽  
Xiang Chao Qu ◽  
Li Ping Zhang
Keyword(s):  
Control System ◽  
Wireless Communication ◽  
Communication Technology ◽  
High Reliability ◽  
Labor Intensity ◽  
Control Technology ◽  
Level Of Automation ◽  
Plc Control ◽  
Detection Technology ◽  
Stable Performance

In view of the furnace top charging car ore bin automatic distributing problems, This article puts forward a kind of high reliability, stable performance of automatic material distributing control system ,The system uses wireless communication technology、Ore bin material level detection technology and High reliability of PLC control technology, Achieving material distributing car accords to the need of ore bin for charging, Making material distributing more rational and effective, reduce labor intensity and improve the level of automation for production.`

scholarly journals Research on Design Practice of PLC in Automatic Control System of Electrical Equipment

2020 ◽  
Vol 9 (5) ◽  
pp. 81
Author(s):  
Zhaosen Zhang ◽  
Yan Gao ◽  
Chen Ye
Keyword(s):  
Control System ◽  
Control Systems ◽  
Production Efficiency ◽  
Low Cost ◽  
Electrical Equipment ◽  
Plc Control ◽  
Wide Range ◽  
Automation Equipment ◽  
Automation Control ◽  
Improve Production Efficiency

PLC control system has a very wide range of applications in today’s electrical automation equipment, because it has the characteristics of good stability, strong environmental adaptability, low cost and diversified program editing according to actual needs, making it automatic The efficiency of control has been greatly improved. Based on the current development of electrical equipment automation in China, this paper analyzes the effects and characteristics of PLC used in automation control systems from many aspects. It studies the selection and application of PLC in the operation of electrical equipment, and proposes to improve production efficiency. Some feasible measures.

Design of the Control System for Fully Automatic Steel-Tube Molding Machine

2014 ◽  
Vol 1006-1007 ◽  
pp. 586-591
Author(s):  
Si Chao Tang ◽  
Jia Ming Yao ◽  
Shou Xin Zhu ◽  
Meng Sheng Wang ◽  
Jia Na Fang ◽  
...  
Keyword(s):  
Control System ◽  
Steel Tube ◽  
Molding Machine ◽  
Plc Control ◽  
Multiple Devices ◽  
Working Principle ◽  
Fully Automatic ◽  
Low Efficiency ◽  
In Transit ◽  
Designing Method

In order to develop the control system for fully automatic molding machine which runs stable, reliable and high-automatically, its operational requirements analysis are studied deeply, based on the analysis of present research and development situation on domestic and foreign molding machine, this paper analyses its mechanical structure, working principle, hydraulic system. Finally, the author designs the FX2N PLC control system and briefly describes designing method and characteristics of hardware and software, which solves the problem: the low efficiency of domestic steel automatic stacker molding, collision quality loss and coordination of multiple devices in transit.

scholarly journals Design of Intelligent Feeding Control System Based on S7-1200 PLC

2021 ◽  
Vol 245 ◽  
pp. 01051
Author(s):  
Tian Feng ◽  
Li Guangpeng
Keyword(s):  
Control System ◽  
Circuit Design ◽  
Operation Mode ◽  
Control Program ◽  
Touch Screen ◽  
Plc Control ◽  
Actual Operation ◽  
Machine Interface ◽  
Man Machine Interface ◽  
Feeding Control

In order to satisfy the needs of pig breeding, an intelligent feeding control system based on S7 1200PLC is designed in this paper. The design scheme selects Siemens S7-1200 PLC as the main controller and MCGS TPC7062TI touch screen as the man-machine interface. The article has carried on the electrical design, including I/O address allocation, the main circuit design, the control circuit design and so on, and has written the PLC control program in the debugging mode and the operation mode, finally has designed the man-machine interface to realize the configuration of the system using MCGS. After the actual operation, the system runs stably, safely and reliably, has achieved the expected goal, and has a certain prospect of popularization and application.

Development of Full-Automatic Flap Disc Production Machine Based on PLC Control System

2012 ◽  
Vol 605-607 ◽  
pp. 1757-1760
Author(s):  
De Huan Tang ◽  
Wen Jie Feng ◽  
De Yang Luo
Keyword(s):  
Control System ◽  
High Speed ◽  
High Performance ◽  
Control Technology ◽  
Servo Motor ◽  
Industrial Control ◽  
Precise Positioning ◽  
Plc Control ◽  
Stable Performance ◽  
Plc Control System

This paper designed a control system for the full-automatic flap disc production machine, the whole control system was designed based on high-performance PLC of Mitsubishi Q series, QD75P positioning module, servo motor of Mitsubishi HF series and other advanced industrial control technology. The control system realizes the target of precise positioning and high-speed responding, and the hardware and software of control system has a stable performance.

The Overall Design of the Comber Drive Control System Drive control system design

2020 ◽  
Vol 13 ◽  
Author(s):  
Xiaobei Wang
Keyword(s):  
Control System ◽  
Textile Industry ◽  
Production Efficiency ◽  
Vital Role ◽  
Cotton Textile ◽  
Drive Control ◽  
Operation Process ◽  
Control Computer ◽  
Industrial Control Computer ◽  
Made In China

Objective: The cotton textile industry, as a competitive industry in China's international competition, is confronting new opportunities and challenges brought by the growing process of mechatronics. To further improve the traditional drive control of combing machines made in China and the automatic level of machines as a whole, some of our cotton textile enterprises have undertaken necessary technical transformations on the combing machines so as to raise the operational efficiency and production technology of domestic textile equipments. Methods: This paper focuses on the basic status and dynamic characteristics of the drive part of the domestic new comber, and analyzes the operation process of the comber and the prominent problems from the production practice. Results: The technically improved drive control system uses an industrial control computer (IPC) as the core of the system, which effectively improves the overall working efficiency of the comber, and improves the production accuracy and production efficiency. Conclusion: The combers that are textile machinery equipments with comprehensive application of machines, electricity, gases and instruments, play a vital role in enhancing product quality and production efficiency. Highly intelligent and integrated process control, real-time monitoring and accurate data acquisition and data analysis have become the mainstreams in the development of auto-control. Therefore, the commitment of high technology to transform the traditional production mode has also been an important research.

A Hydraulic Control System Design for Change-Wheel Garage of Light Rail Based on PLC

2012 ◽  
Vol 233 ◽  
pp. 76-79
Author(s):  
Yong Gang Yang ◽  
Jun Sun ◽  
Meng Tao Yang
Keyword(s):  
Control System ◽  
System Design ◽  
Servo Control ◽  
Light Rail ◽  
Control System Design ◽  
Hydraulic Control ◽  
Plc Control ◽  
Servo Control System ◽  
Hydraulic Servo ◽  
Hydraulic Control System

This paper introduces the hydraulic control system design for the change-wheel garage of Chongqing light rails through analysis of three-stage cylinder synchronization circuit for lifting bodies, and optimizing the design of the slewing mechanism with respect to the hydraulic servo control system of digital cylinder. The results improved the smoothness in the process of changing wheel lifting and the rotary accuracy of the rotary mechanism. Design on the PLC control system of the system is also included as part of this paper.

DEVELOPMENT OF AN ARTICULATION ROBOT ARM

2017 ◽  
Vol 41 (3) ◽  
pp. 443-455
Author(s):  
Kuo-Lan Su ◽  
Jian-Fu Weng ◽  
Jr-Hung Guo ◽  
Kai-Lu Cai
Keyword(s):  
Control System ◽  
Vision System ◽  
Motion Trajectory ◽  
Robot Arm ◽  
Plc Control ◽  
Plc Control System

This article describes the design of an articulation robot arm with seven joints. The control core of the robot arm is the module-based system built using the Mitsubishi Q series programming logical controller (PLC). The robot arm contains seven AC servomotors, seven driver devices, a vision system and a PLC control system. The PLC-based controller programs the motion trajectory of the gripper to catch or hold the objects and finish the assigned tasks. Kinect system (Asus Xtion Pro-Live, or called RGB-D sensor) acts as the vision system to recognize shape and color of each object. During the experiments, we found that the robot arm recognizes the shape and color of each object, and catches each object moving to the assigned box with the same color.

Application of PLC Technology in the Control System of Plate Shearing Machine

2013 ◽  
Vol 312 ◽  
pp. 777-781
Author(s):  
Lu Ping Liu
Keyword(s):  
Control System ◽  
Control Technology ◽  
Working Process ◽  
Industrial Manufacturing ◽  
Plc Control ◽  
Machine Control ◽  
And Control

In the modern industrial manufacturing field, PLC plays a very important role. In this paper, through analyzing the working process and control requirements of plate shearing machine and using PLC control technology, the automation design of the plate shearing machine control system is realized.

Sign in / Sign up

Export Citation Format

Share Document