Repair and Health Monitoring for Historical Structures

2010 ◽  
Vol 133-134 ◽  
pp. 205-209
Author(s):  
Mohamad Hossein Maleki Tabrizi

Historical structures, like to masonry towers and another structures are among the structures subjected to the higher risk, due to their age, elevation and low base area on height ratio. In this paper introduce a technique of monitoring the structural integrity of historical buildings by a noncontact and non-destructive analysis is presented and discussed. The damage and destroy of a structure and building, in terms of cracks and overall structural degradation, is detected throughout the measurement of its dynamic characteristics by various ways, for example by a laser Doppler vibrometer(LDV). These techniques can show the frequency spectrum of the structure with high accuracy and reliability and reaction of structure against this technique. Also we will introduce that timber components have no influence on the system behaviour, which is mainly determined by the properties of connections and reactions.

2021 ◽  
Author(s):  
Fabrizio D'Amico ◽  
Valerio Gagliardi ◽  
Chiara Clementini ◽  
Daniele Latini ◽  
Fabio Del Frate ◽  
...  

<p>Bridges and viaducts are exposed to a variety of threats that can affect their operations and structural integrity [1]. Recent unexpected collapses and failures of bridges underline the need for effective structural monitoring, particularly for reinforced concrete structures. In fact, once distress mechanisms are triggered, these can deteriorate faster than the time required for rehabilitation, strengthening, or replacement.</p><p>To this extent, it is evident that the monitoring of the actual health conditions of the existing bridges is a priority for asset operators in order to guarantee the structural integrity, the safety of the operations and preventing irreversible damages or even structural collapses.</p><p>Within this context, Non-Destructive Testing (NDT) methods such as Ground Penetrating Radar (GPR) and Terrestrial Laser Scanner (TLS) amongst many others have been used for the assessing and monitoring such structures in the past few years[2]. However, topic-related studies [3-4] have demonstrated that stand-alone use of ground-based techniques may not represent a definitive solution to particular major structural issues, such as scour and differential settlements, as these require continuous monitoring and data collection on long-term bases . To that extent, the use of satellite-based remote sensing techniques, such as Synthetic Aperture Radar Interferometry (InSAR), have proven to be effective in detecting displacements with a millimetre accuracy along with transport infrastructures [3-5] and natural terrain considering long periods of observation.</p><p>Accordingly, this research aims to present a novel integrated monitoring approach including the use of ground-based technologies (GPR, TLS) and the InSAR techniques over a Maillart arch type bridge: the Viadotto Olivieri in Salerno, (in the South of Italy).</p><p>Main objectives of the research  are: (1) to prove the viability of low-frequency and high-frequency GPR systems in providing structural detailing of the bridge-deck at different depths and resolutions; (2) to measure seasonal structural displacements with a millimetre accuracy to detect potential critical issues of the bridge.</p><p>The outcomes of this study, under the National Project “EXTRA TN”, PRIN 2017- Prot. 20179BP4SM, demonstrate how multi-temporal InSAR remote sensing techniques can be synergistically applied to complement the traditional ground-based surveys.</p><p> </p><p>References</p><p>[1] Hosseini Nourzad, S. H. and Pradhan, A. Vulnerability of Infrastructure Systems: Macroscopic Analysis of Critical Disruptions on Road Networks. Journal of Infrastructure Systems, 22(1), 04015014. 2016</p><p>[2] D’Aranno, P., Di Benedetto, A., Fiani, M., and Marsella, M.: Remote Sensing Technologies For Linear Infrastructure Monitoring, Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLII-2/W11, 461–468, https://doi.org/10.5194/isprs-archives-XLII-2-W11-461-2019, 2019.</p><p>[3] Bianchini Ciampoli, L., Gagliardi, V., Clementini, et al., Transport Infrastructure Monitoring by InSAR and GPR Data Fusion. Surv Geophys 41, 371–394 (2020). https://doi.org/10.1007/s10712-019-09563-7</p><p>[4] Gagliardi V., Benedetto A., Bianchini Ciampoli L., D’Amico F., Alani A., Tosti F., 2020. Health monitoring approach for transport infrastructure and bridges by satellite remote sensing Persistent Scatterer Interferometry (PSI). Proc.SPIE 11534. https://doi.org/10.1117/12.2572395</p><p>[5] Bianchini Ciampoli L., Gagliardi V., Calvi A., D’Amico F., Tosti F., Automatic network-level bridge monitoring by integration of InSAR and GIS catalogues. Proceedings of SPIE - The International Society for Optical Engineering, 11059, (2019). DOI: 10.1117/12.2527299</p>


2017 ◽  
Vol 59 (12) ◽  
pp. 700-704
Author(s):  
Akira Ohzu ◽  
Masao Komeda ◽  
Masatoshi Kureta ◽  
Yoshiaki Nakatsuka ◽  
Shinichi Nakashima

2021 ◽  
Vol 11 (4) ◽  
pp. 1647
Author(s):  
Georgios Foteinidis ◽  
Alkiviadis S. Paipetis

We report the transformation of a conventional composite material into a multifunctional structure able to provide information about its structural integrity. A purposely positioned grid of carbon fabric strips located within a glass fibre laminate in alternating 0/90 configuration combined with a ternary nanomodified epoxy matrix imparted structural health monitoring (SHM) topographic capabilities to the composite using the impedance spectroscopy (IS) technique. The matrix was reinforced with homogenously dispersed multi-walled carbon nanotubes (MWCNTs) and carbon black (CB). A sinusoidal electric field was applied locally over a frequency range from 1 Hz to 100 kHz between the junction points of the grid of carbon fabric strips. The proposed design enabled topographic damage assessment after a high-velocity impact via the local monitoring of the impedance. The data obtained from the IS measurements were depicted by magnitude and phase delay Bode plots and Nyquist plots. The impedance values were used to create a 2D and a multi-layer (3D) contour topographical image of the damaged area, which revealed crucial information about the structural integrity of the composite.


Vibration ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 551-584
Author(s):  
Samir Mustapha ◽  
Ye Lu ◽  
Ching-Tai Ng ◽  
Pawel Malinowski

The development of structural health monitoring (SHM) systems and their integration in actual structures has become a necessity as it can provide a robust and low-cost solution for monitoring the structural integrity of and the ability to predict the remaining life of structures. In this review, we aim at focusing on one of the important issues of SHM, the design, and implementation of sensor networks. Location and number of sensors, in any SHM system, are of high importance as they impact the system integration, system performance, and accuracy of assessment, as well as the total cost. Hence we are interested in shedding the light on the sensor networks as an essential component of SHM systems. The review discusses several important parameters including design and optimization of sensor networks, development of academic and commercial solutions, powering of sensors, data communication, data transmission, and analytics. Finally, we presented some successful case studies including the challenges and limitations associated with the sensor networks.


Author(s):  
Jingjing Xia ◽  
Xiayu Du ◽  
Weixin Xu ◽  
Yun Wei ◽  
Yanmei Xiong ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document