Test Study on the Resisting Shear Strengthening Effect with External Pre-Stressed Wire Rope

2011 ◽  
Vol 243-249 ◽  
pp. 5571-5575 ◽  
Author(s):  
Tian Lai Yu ◽  
Qiang Ma ◽  
Lei Lei Tian
Keyword(s):  
Reinforced Concrete ◽  
Strengthening Mechanism ◽  
Wire Rope ◽  
Shear Capacity ◽  
Reinforced Concrete Beams ◽  
Design Parameters ◽  
Strengthening Effect ◽  
Shear Strengthening ◽  
Research Results ◽  
Beam Design

The resisting shear strengthening technology of existing reinforced concrete bridges as an important research topic in the field of old bridges, play an important significance to improve the mechanical properties of old bridges and reduce security incidents. Based on comparative test analysis on two basic beams and twelve reinforced concrete beams strengthened with external pre-stressed wire rope, the influence of the shear strengthening effect was studied systematically caused by the original beam design parameters and the spacing of wire rope, in the meantime the strengthening mechanism was analyzed. Research results showed that the shear capacity of the strengthened beams was improved, because the development of cracks was not only effectively limited, but also stirrup strain was reduced, and yield load was put off. Along with the increasing of the ratio of original beams longitudinal reinforcement and the ratio of stirrup ,and the concrete grade, as well as the decreasing of spacing of external wire rope, the stirrups strain were decreasing and the shear capacity of strengthened beams increased. With the spacing of external wire rope decreasing, the diagonal crack resistance of the strengthened beams increased. The research results can provide reference for the design and research on shear strengthening of bridges.

Predicting the effect of stirrups on shear strength of reinforced normal-strength concrete (NSC) and high-strength concrete (HSC) slender beams using artificial intelligence

2006 ◽  
Vol 33 (8) ◽  
pp. 933-944 ◽  
Author(s):  
H El Chabib ◽  
M Nehdi ◽  
A Saïd
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
High Strength ◽  
Shear Capacity ◽  
Reinforced Concrete Beams ◽  
Design Parameters ◽  
Rc Beams ◽  
Shear Reinforcement ◽  
Strength Concrete ◽  
Shear Design

The exact effect that each of the basic shear design parameters exerts on the shear capacity of reinforced concrete (RC) beams without shear reinforcement (Vc) is still unclear. Previous research on this subject often yielded contradictory results, especially for reinforced high-strength concrete (HSC) beams. Furthermore, by simply adding Vc and the contribution of stirrups Vs to calculate the ultimate shear capacity Vu, current shear design practice assumes that the addition of stirrups does not alter the effect of shear design parameters on Vc. This paper investigates the validity of such a practice. Data on 656 reinforced concrete beams were used to train an artificial neural network model to predict the shear capacity of reinforced concrete beams and evaluate the performance of several existing shear strength calculation procedures. A parametric study revealed that the effect of shear reinforcement on the shear strength of RC beams decreases at a higher reinforcement ratio. It was also observed that the concrete contribution to shear resistance, Vc, in RC beams with shear reinforcement is noticeably larger than that in beams without shear reinforcement, and therefore most current shear design procedures provide conservative predictions for the shear strength of RC beams with shear reinforcement.Key words: analysis, artificial intelligence, beam depth, compressive strength, modeling, shear span, shear strength.

scholarly journals Shear Strengthening of Reinforced Concrete Beams Using GFRP Wraps

10.14311/800 ◽  
2006 ◽  
Vol 46 (1) ◽  
Author(s):  
M. A. A. Saafan
Keyword(s):  
Reinforced Concrete ◽  
Failure Modes ◽  
Concrete Beams ◽  
Shear Capacity ◽  
Reinforced Concrete Beams ◽  
Structural Behavior ◽  
Shear Strengthening ◽  
Premature Failure ◽  
Web Reinforcement ◽  
Strengthening Technique

The objective of the experimental work described in this paper was to investigate the efficiency of GFRP composites in strengthening simply supported reinforced concrete beams designed with insufficient shear capacity. Using the hand lay-up technique, successive layers of a woven fiberglass fabric were bonded along the shear span to increase the shear capacity and to avoid catastrophic premature failure modes. The strengthened beams were fabricated with no web reinforcement to explore the efficiency of the proposed strengthening technique using the results of control beams with closed stirrups as a  web reinforcement. The test results of 18 beams are reported, addressing the influence of different shear strengthening schemes and variable longitudinal reinforcement ratios on the structural behavior. The results indicated that significant increases in the shear strength and improvements in the overall structural behavior of beams with insufficient shear capacity could be achieved by proper application of GFRP wraps.

scholarly journals Shear Capacity of Reinforced Concrete Beams under Monotonic and Cyclic Loads: Experiments and Computational Models

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4092
Author(s):  
Kamil Bacharz ◽  
Barbara Goszczyńska
Keyword(s):  
Reinforced Concrete ◽  
Laboratory Tests ◽  
Computational Models ◽  
Concrete Beams ◽  
Shear Capacity ◽  
Reinforced Concrete Beams ◽  
Image Correlation ◽  
Engineering Practice ◽  
Cyclic Loads ◽  
Loading Modes

The paper reports the results of a comparative analysis of the experimental shear capacity obtained from the tests of reinforced concrete beams with various static schemes, loading modes and programs, and the shear capacity calculated using selected models. Single-span and two-span reinforced concrete beams under monotonic and cyclic loads were considered in the analysis. The computational models were selected based on their application to engineering practice, i.e., the approaches implemented in the European and US provisions. Due to the changing strength characteristics of concrete, the analysis was also focused on concrete contribution in the shear capacity of reinforced concrete beams in the cracked phase and on the angle of inclination of diagonal struts. During the laboratory tests, a modern ARAMIS digital image correlation (DIC) system was used for tracking the formation and development of diagonal cracks.

scholarly journals Statistical and Reliability Study on Shear Strength of Recycled Coarse Aggregate Reinforced Concrete Beams

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3321
Author(s):  
Hyunjin Ju ◽  
Meirzhan Yerzhanov ◽  
Alina Serik ◽  
Deuckhang Lee ◽  
Jong R. Kim
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Construction Material ◽  
Safety Margin ◽  
Shear Capacity ◽  
Reinforced Concrete Beams ◽  
Construction And Demolition Waste ◽  
Demolition Waste ◽  
Rc Structures ◽  
Coarse Aggregates

The consumption of structural concrete in the construction industry is rapidly growing, and concrete will remain the main construction material for increasing urbanization all over the world in the near future. Meanwhile, construction and demolition waste from concrete structures is also leading to a significant environmental problem. Therefore, a proper sustainable solution is needed to address this environmental concern. One of the solutions can be using recycled coarse aggregates (RCA) in reinforced concrete (RC) structures. Extensive research has been conducted in this area in recent years. However, the usage of RCA concrete in the industry is still limited due to the absence of structural regulations appropriate to the RCA concrete. This study addresses a safety margin of RCA concrete beams in terms of shear capacity which is comparable to natural coarse aggregates (NCA) concrete beams. To this end, a database for reinforced concrete beams made of recycled coarse aggregates with and without shear reinforcement was established, collecting the shear specimens available from various works in the existing literature. The database was used to statistically identify the strength margin between RCA and NCA concrete beams and to calculate its safety margin based on reliability analysis. Moreover, a comparability study of RCA beams was conducted with its control specimens and with a database for conventional RC beams.

scholarly journals A Computational Study of the Shear Behavior of Reinforced Concrete Beams Affected from Alkali–Silica Reactivity Damage

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3346
Author(s):  
Bora Gencturk ◽  
Hadi Aryan ◽  
Mohammad Hanifehzadeh ◽  
Clotilde Chambreuil ◽  
Jianqiang Wei
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Parametric Study ◽  
Computational Study ◽  
Element Model ◽  
Shear Behavior ◽  
Shear Capacity ◽  
Reinforced Concrete Beams ◽  
Alkali Silica Reactivity ◽  
Concrete Mechanical Properties

In this study, an investigation of the shear behavior of full-scale reinforced concrete (RC) beams affected from alkali–silica reactivity damage is presented. A detailed finite element model (FEM) was developed and validated with data obtained from the experiments using several metrics, including a force–deformation curve, rebar strains, and crack maps and width. The validated FEM was used in a parametric study to investigate the potential impact of alkali–silica reactivity (ASR) degradation on the shear capacity of the beam. Degradations of concrete mechanical properties were correlated with ASR expansion using material test data and implemented in the FEM for different expansions. The finite element (FE) analysis provided a better understanding of the failure mechanism of ASR-affected RC beam and degradation in the capacity as a function of the ASR expansion. The parametric study using the FEM showed 6%, 19%, and 25% reduction in the shear capacity of the beam, respectively, affected from 0.2%, 0.4%, and 0.6% of ASR-induced expansion.

Sign in / Sign up

Export Citation Format

Share Document