Study on Rapid Closure Technology of Long Span Continuous Rigid Frame Bridge

2011 ◽  
Vol 255-260 ◽  
pp. 1120-1124
Author(s):  
Dong Lian Tan ◽  
Deng Ke Wang ◽  
Wen Ru Lu ◽  
Long Zhang ◽  
Xin Yuan Lin
Keyword(s):  
Prestressed Concrete ◽  
Internal Force ◽  
System Transformation ◽  
Construction Period ◽  
Long Span ◽  
Continuous Rigid Frame Bridge ◽  
Construction Procedure ◽  
Rigid Frame ◽  
Jacking Force ◽  
Rigid Frame Bridge

The choice of closure order of long span prestressed concrete continuous rigid frame bridge is the key part on its construction procedure, which has a big influence on the gross force and alignent of the whole structure. On the Basis of the Hanjiang bridge, the paper studies the closure order of long span prestressed concrete continuous rigid frame bridge and its system transformation procedure as well as the effect of jacking force etc. It shows that the technique of the midspan and the sidespan close at the same time not only meets the requirement of allowable internal force, but also has the benefit of shorten the construction period as well as reducing the degree of construction difficulty.

Long Span Prestressed Concrete Continuous Rigid-Frame Bridge ANN Construction Control

2012 ◽  
Vol 204-208 ◽  
pp. 2261-2264
Author(s):  
Geng Feng Ren ◽  
Cun Jun Zou ◽  
Yue Xu
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Prestressed Concrete ◽  
Construction Control ◽  
Bridge Construction ◽  
Long Span ◽  
Continuous Rigid Frame Bridge ◽  
Rigid Frame ◽  
Artificial Neural ◽  
Rigid Frame Bridge

Based on the theory of ANN (Artificial Neural Network),The paper raised the method of construction control, and introduced the common forecasting method. According to the characteristic of ANN itself and the complexity of factors which influence the elevation, the paper analysed the influence aspects of ANN. On the promise of bridge construction precision, the paper raised section measure、elasticity model、temperature、delay of construction and cantilever for neural network’s input vector in bridge construction process. With the help of Graphical User Interface, built ANN, made the forecast function in the bridge construction into reality. Introduce the theory of Artificial Neural Network(ANN) into long span prestressed concrete continuous rigid-frame bridge construction control.

scholarly journals Time-varying Reliability Analysis of Long-span Continuous Rigid Frame bridge under Cantilever Construction Stage based on the Monitored Strain Data

2020 ◽  
Vol 3 (1) ◽  
Author(s):  
Ying hua Li ◽  
Ke sheng Peng ◽  
Lu rong Cai ◽  
Jun yong He
Keyword(s):  
Prestressed Concrete ◽  
Base Plate ◽  
Internal Force ◽  
Time Varying ◽  
Construction Stage ◽  
Continuous Rigid Frame Bridge ◽  
Rigid Frame ◽  
Strain Data ◽  
Cantilever Construction ◽  
Rigid Frame Bridge

Abstract: In general, the material properties, loads, resistance of the prestressed concrete continuous rigid frame bridge in different construction stages are time-varying. So, it is essential to monitor the internal force state when the bridge is in construction. Among them, how to assess the safety is one of the challenges. As the continuous monitoring over a long-term period can increase the reliability of the assessment, so, based on a large number of monitored strain data collected from the structural health monitoring system (SHMS) during construction, a calculation method of the punctiform time-varying reliability is proposed in this paper to evaluate the stress state of this type bridge in cantilever construction stage by using the basic reliability theory. At the same time, the optimal stress distribution function in the bridge mid-span base plate is determined when the bridge is closed. This method can provide basis and direction for the internal force control of this type bridge in construction process. So, it can reduce the bridge safety and quality accidents in construction stages.

Construction Stage Mechanical Performance Analysis of Long-Span Continuous Rigid Frame Bridge

2014 ◽  
Vol 1030-1032 ◽  
pp. 750-753
Author(s):  
Hua Su
Keyword(s):  
Finite Elements ◽  
Mechanical Performance ◽  
Internal Force ◽  
Construction Process ◽  
Construction Stage ◽  
Long Span ◽  
Continuous Rigid Frame Bridge ◽  
Rigid Frame ◽  
Rigid Frame Bridge ◽  
Finite Elements Model

Accurate simulation of construction process of continuous rigid frame bridge is a foundation to make a bridge built accurately. Based on the suit iteration method, this paper used MIDAS to built a 3D finite elements model, the internal force and deformation results of each construction stage was obtained. This study provided a good theoretical reference for the control of long-span continuous rigid frame bridge construction..

Simulation Analysis on Construction of Liangjiang Great Bridge

2014 ◽  
Vol 587-589 ◽  
pp. 1698-1702
Author(s):  
Min Si ◽  
Shi Xiang Bie ◽  
Bao Lai Li ◽  
Xiao Chun Fan
Keyword(s):  
Prestressed Concrete ◽  
Simulation Analysis ◽  
Bridge Construction ◽  
Long Span ◽  
Continuous Rigid Frame Bridge ◽  
Rigid Frame ◽  
Initial Camber ◽  
High Pier ◽  
Cantilever Construction ◽  
Rigid Frame Bridge

Liangjiang Great Bridge is the prestressed concrete continuous rigid frame bridge with high pier and long-span. It adopts the segmented cantilever construction method. The process of its construction is the key to the construction control simulation analysis. In this paper, based on the characteristics of the bridge construction, finite element method is used to establish the simulation model. Cantilever construction stages and closure stages of bridge are simulated and analyzed. The structure deflection diagrams in the each section construction and the later construction considering the creep and shrinkage of concrete are obtained. The initial camber of each segment is given in the construction. The stress characteristics of key section are analyzed in the construction process. It provides a basis for monitoring and on-site construction of bridge and the reference for similar bridge construction.

Control Technology on Jacking Closure Construction of Liangjiang Great Bridge

2014 ◽  
Vol 587-589 ◽  
pp. 1430-1434
Author(s):  
Hao Jie Zhang ◽  
Zi Qiang Peng ◽  
Bao Lai Li ◽  
Xiao Chun Fan
Keyword(s):  
Prestressed Concrete ◽  
Reference Value ◽  
Bridge Engineering ◽  
Construction Technology ◽  
Continuous Rigid Frame Bridge ◽  
Rigid Frame ◽  
Element Simulation ◽  
Jacking Force ◽  
Working Procedure ◽  
Rigid Frame Bridge

Prestressed concrete continuous rigid frame bridge is widely used in bridge engineering. Its closure is one of very important working procedure in the bridge construction. In this paper, taking Liangjiang Great Bridge in Xinxu Highway as an example, the methods for determining the Jacking force and displacement are discussed. The implementation of the process and construction technology of closure jacking scheme is introduced in detail. Through the finite element simulation, the stress state of on the structural pusher is analyzed. And the maximum stress of the pier bottom and the displacement of the pier top are obtained. They can verify the feasibility of the scheme. Monitoring results from the site construction verify the safety of the scheme. The method has a certain reference value on jacking closure construction for the similar bridge.

Influence of Cracks Parameters on Bearing Capacity for Prestressed Concrete Box Girder

2012 ◽  
Vol 166-169 ◽  
pp. 1963-1966
Author(s):  
Zhao Ning Zhang
Keyword(s):  
Bearing Capacity ◽  
Prestressed Concrete ◽  
Operations Management ◽  
Box Girder Bridges ◽  
Box Girder ◽  
Girder Bridges ◽  
Long Span ◽  
Continuous Rigid Frame Bridge ◽  
Rigid Frame ◽  
Rigid Frame Bridge

For long-span pre-stressed concrete continuous box girder bridges, cracks and other damage problem are often found because of influence of loads, climate, operations management and other factors during operation. The problem of cracking is serious increasingly, which has a direct impact on usability, durability and security. In order to analyze the bearing capacity of the bridge with cracks under different parameters, such as cracks width, cracks height and cracks spacing and provide the basis for the safety assessment and reinforcement, the paper puts forward the cracking reduction coefficient that evaluates the bearing capacity of the damaged bridge based on the tensile stress control. A three-span continuous rigid frame bridge is analyzed and the result shows that the bearing capacity of the bridge is in inverse proportion to cracks width and cracks height. The bearing capacity of the bridge is in direct proportion to cracks spacing.

Analysis of Technical Characteristics and Construction Focus of Long-Span Continuous Rigid Frame Bridge with High-Rise Piers

2014 ◽  
Vol 587-589 ◽  
pp. 1637-1641
Author(s):  
Yao Cui ◽  
We Nang Hou ◽  
Fei Ying Liu
Keyword(s):  
Deep Water ◽  
Water Reservoir ◽  
Bridge Pier ◽  
Reservoir Area ◽  
High Rise ◽  
Construction Methods ◽  
Long Span ◽  
Continuous Rigid Frame Bridge ◽  
Rigid Frame ◽  
Rigid Frame Bridge

Under the condition of the deep water reservoir area, the choice of bridge pier and long span continuous rigid frame beam construction methods are quite various. And the analysis of destruction of bridge depends mostly on the beam and piers. The paper cares mostly about these two parts.

Long Term Deformation Control of Long-Span Pre-Stressed Concrete Continuous Rigid Frame Bridge with Ballastless Track

2010 ◽  
Vol 163-167 ◽  
pp. 1515-1519 ◽  
Author(s):  
Jian An Cao ◽  
Mei Xin Ye ◽  
Wen Qi Hou
Keyword(s):  
Rail Transit ◽  
Bridge Construction ◽  
Deformation Control ◽  
Long Span ◽  
Ballastless Track ◽  
Continuous Rigid Frame Bridge ◽  
Rigid Frame ◽  
External Tendons ◽  
Rigid Frame Bridge

Aiming to Ronggui Bridge (RGB) on Guangzhou-Zhuhai Intercity Rapid Rail Transit (GZIRRT), long term deformation control of long-span pre-stressed concrete continuous rigid frame bridge with ballastless track was studied. Comparing with the non-controlled deformation, extend track laying six months later after bridge construction, reserve 48 post-tensioned cables in middle spans and tension 12 external tendons after tracking laying were all effective in decreasing the long term deformation of RGB with individual application. Taking bridge construction and railway service in consideration, applying the foregoing three measures in combination, deformation of RGB 20 years later after track laying was effectively controlled within 12.8mm in the side spans and 21.9mm in the middle spans, which is less than the deformation limitation of bridges with ballastless track. The combined measure has been adopted in the actual construction of RGB.

Studies on Lay Out Scheme of Steel Beam in Midspan Bottom Slab of Long-Span Continuous Rigid-Frame Bridge

2011 ◽  
Vol 183-185 ◽  
pp. 1933-1937
Author(s):  
Dan Lv ◽  
Yi Feng Zheng ◽  
Qun Zhao
Keyword(s):  
Steel Beams ◽  
Steel Beam ◽  
Tension Stress ◽  
Variable Cross ◽  
Long Span ◽  
Continuous Rigid Frame Bridge ◽  
Rigid Frame ◽  
Straight Line ◽  
Rigid Frame Bridge ◽  
Bottom Slab

Most of steel beams in midspan bottom slab are fixed up following the shape of girder bottom edge with both ends anchoring to the bottom slab wedge. Due to the girder of long-span continuous rigid-frame bridge has variable cross section, the shape of steel beams in midspan bottom slab presents a curve opening downward, which does harm to the girder. Arranging steel beams along straight line in the bottom slab with both ends anchoring to the top wedge is better for girder to carry load. The analysis results of two methods analyzed by FEM shows that arranging of straight line lowers the stress of the top edge of girder meanwhile it increases the stress of bottom slab edge. Besides, the method lowers pressure stress and shear stress of the height middle of the girder where the steel beam anchoring and increases the main tension stress reservation which is good for the girder to carry load.

Sign in / Sign up

Export Citation Format

Share Document