Load testing and health monitoring of monolithic bridges with innovative reinforcement

PurposeThe paper aims to investigate effectiveness of the strengthening method, the construction process monitoring, fielding-load tests before and after strengthening, and health monitoring after reinforcement were carried out. The results of concrete strain and deflection show that the flexural strength and stiffness of the strengthened beam are improved.Design/methodology/approachThis paper describes prestressed steel strand as a way to strengthen a 25-year-old continuous rigid frame bridge. High strength, low relaxation steel strand with high tensile strain and good corrosion resistance were used in this reinforcement. The construction process for strengthening with prestressed steel strand and steel plate was described. Ultimate bearing capacity of the bridge after strengthening was discussed based on finite element model.FindingsThe cumulative upward deflection of the second span the third span was 39.7 mm, which is basically consistent with the theoretical value, and the measured value is smaller than the theoretical value. The deflection value of the second span during data acquisition was −20 mm–10 mm, which does not exceed the maximum deflection value of live load, and the deflection of the bridge is in a safe state during normal use. Thus, this strengthened way with prestressed steel wire rope is feasible and effective.Originality/valueThis paper describes prestressed steel strand as a way to strengthen a 25-year-old continuous rigid frame bridge. To investigate effectiveness of the strengthening method, the construction process monitoring, fielding-load tests before and after strengthening and health monitoring after reinforcement were carried out.

Maintenance Management Research of a Large-span Continuous Rigid Frame Bridge Based on Reliability Assessment by Using Strain Monitored Data

When the bridge components needing maintenance are the world problem at present, and the health monitoring system is considered to be a very helpful tool for solving this problem. In this paper, a large number of strain data acquired from the structural health monitoring system (SHMS) installed on a continuous rigid frame bridge are adopted to do reliability assessment. Firstly, a calculation method of punctiform time-dependent reliability is proposed based on the basic reliability theory, and introduced how to calculate reliability of the bridge by using the stress data transformed from the strain data. Secondly, combined with “Three Sigma” principle and the basic pressure safety reserve requirement, the critical load effects distribution function of the bridge is defined, and then the maintenance reliability threshold for controlling the unfavorable load state which appears in the early operation stage of this type bridge is suggested, and then the combination of bridge maintenance management and health monitoring system is realized. Finally, the transformed stress distribution certifies that the load effects of concrete bridges practically have a normal distribution; as for the concrete continuous rigid frame bridge with C50 strength grade concrete, the retrofit reliability threshold should be valued at 6.13. The methodology suggested in this article can help bridge engineers do effective maintenance of bridges, which can effectively extend the service life of the bridge and bring better economic and social benefits.

Performance-Based Seismic Fragility and Risk Assessment of Five-Span Continuous Rigid Frame Bridges

Earthquakes can cause serious damage to traffic infrastructures, among which the impact on bridge structure is the most important. Therefore, in order to assess bridges serviceability, it is important to master their damage mechanism and to analyze its probability of occurrence under a given seismic action. Various uncertainties, like the location of epicentre of future earthquakes and their magnitudes, make this task quite challenging. We are also required to consider different earthquake scenarios and the damaged states of bridge components associated with those earthquakes. To suppress these difficulties, this study proposed a new method of performance-based seismic fragility and risk assessment for bridges. The proposed method included three steps: (1) performance-based seismic fragility estimation of a five-span continuous rigid frame bridge, (2) seismic hazard analysis for locations of the bridge, and (3) seismic risk analysis of the bridge. The proposed method that considered the performance of the bridge and the uncertainty in the location of the earthquake epicentre and magnitudes can provide valuable references for seismic-resistant design of multispan continuous rigid frame bridges in the future.