Design of Floating HPMC Matrix Tablets: Effect of Formulation Variables on Floating Properties and Drug Release

2011 ◽  
Vol 311-313 ◽  
pp. 1140-1143
Author(s):  
Srisagul Sungthongjeen ◽  
Pornsak Sriamornsak ◽  
Satit Puttipipatkhachorn
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Hydraulic Press ◽  
Matrix Tablets ◽  
Compression Force ◽  
Lower Viscosity ◽  
Floating Tablet ◽  
Tablet Formulations ◽  
Model Drug ◽  
Formulation Variables

Floating matrix tablets were designed and evaluated. Theophylline was used as a model drug. The system was prepared by mixing drug, matrix-forming polymer (hydroxypropyl methylcellulose, HPMC) and fillers together. The blended powder was compressed by hydraulic press. The effect of formulation variables such as type of matrix forming polymer (HPMC K100LV, HPMC K4M, HPMC K100M), amount of effervescent agent (0, 20, 30, 40% w/w) and compression force (0.5, 1 ton) on floating properties and drug release of floating matrix tablets were investigated. The results demonstrated that type of polymer affected floating properties of the floating matrix tablets. The floating matrix tablets prepared from lower viscosity HPMC (HPMC K100LV) showed faster drug release than those prepared from higher viscosity HPMC (HPMC K4M, HPMC K100M). Increasing amount of effervescent agent decreased time to float and increased drug release from the floating matrix tablets. Higher compression force did not affect time to float but decreased drug release from the floating matrix tablets. According to these results, floating properties and drug release of the floating matrix tablets could be modified by formulation variables. Some floating tablet formulations developed in this study showed good floating properties (time to float less than 15 minutes, floating time more than 8 hours) with sustained release as required. The system is promising as a carrier for gastroretentive drug delivery systems.

Evaluation of Curcuminoids Effervescent Floating Tablets

2014 ◽  
Vol 1060 ◽  
pp. 25-28
Author(s):  
Sakonjan Treesinchai ◽  
Satit Puttipipatkhachorn ◽  
Tasana Pitaksuteepong ◽  
Srisagul Sungthongjeen
Keyword(s):  
Drug Release ◽  
Sodium Lauryl Sulfate ◽  
Hydroxypropyl Methylcellulose ◽  
Protective Layer ◽  
Lauryl Sulfate ◽  
Floating Tablets ◽  
Floating Tablet ◽  
Core Tablet ◽  
Formulation Variables ◽  
Reduced Time

The objective of this study was to develop and evaluate curcuminoids effervescent floating tablet. The system consists of a curcuminoids-containing core tablet coated with a gas forming layer (tartaric acid layer and sodium bicarbonate layer divided by a protective layer (hydroxypropyl methylcellulose)) and a gas-entrapped membrane (Eudragit® RL 30D), respectively. The floating tablets using lactose as a filler showed higher drug release than those using microcrystalline cellulose (MCC) or MCC:lactose as a filler. However, type of core tablet fillers did not affect time to float of the floating tablets in 0.1 N HCl. Increasing amount of gas forming agent reduced time to float and increased drug release from the floating tablets. The floating tablets showed good floating properties in 0.1 N HCl, however, curcuminoids released was very slow. Addition of surfactant (1%w/v sodium lauryl sulfate (SLS)) in 0.1 N HCl could improve drug release of the floating tablets but it increased time to float and caused the floating tablet ruptured. The floating properties and drug release from curcuminoids effervescent floating tablets seemed to depend on formulation variables. The higher coating level or another type of gas-entrapped membrane may be need for further study.

Effects of release modifier on Carvedilol release from Kollidon SR based matrix

2012 ◽  
Vol 1 (8) ◽  
pp. 186 ◽  
Author(s):  
Urmi Das ◽  
Mohammad Salim Hossain
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Microcrystalline Cellulose ◽  
Matrix Tablets ◽  
Dissolution Time ◽  
Release Mechanism ◽  
Matrix Tablet ◽  
Weight Variation ◽  
The Matrix ◽  
Tablet Formulations

<p>Sustained release Carvedilol matrix tablets constituting Kollidon SR were developed in this study in an attempt to investigate the effect of release modifiers on the release profile of Carvedilol from matrix. Three matrix tablet formulations were prepared by direct compression of Kollidon SR in combination with release modifier (HPMC and Microcrystalline Cellulose) and magnesium stearate. Tablets containing only Kollidon SR with the active ingredient demonstrated a rapid rate of drug release. Incorporation of HPMC in the matrix tablet prolonged the release of drug but incorporation of Microcrystalline Cellulose showed superimposable release pattern with an initial burst effect as confirmed by mean dissolution time and Higuchi release rate data. After 7 hours of dissolution, Carvedilol release from the matrix systems were 91.42%, 83.41%, from formulation F1 and F2 respectively. Formulation F3 exhibited 100 % release at 4 hours. All the tablet formulations showed acceptable pharmaco-technical properties and complied with the in-house specifications for tablet weight variation, friability, hardness, thickness, and diameter. Prepared tablets also showed sustained release property for carvedilol. The drug release mechanism from the matrix tablets of F1 and F2 was found to be followed by Fickian and F3 by Non-Fickian mechanism.</p><p>DOI: <a href="http://dx.doi.org/10.3329/icpj.v1i8.11095">http://dx.doi.org/10.3329/icpj.v1i8.11095</a></p> <p>International Current Pharmaceutical Journal 2012, 1(8): 186-192</p>

Influence of Formulation Variables and Processing Techniques on Drug Release from Carbopol-971 based Matrix Tablets of Cinnarizine and Nimodipine.

2010 ◽  
Vol 2 (1) ◽  
Author(s):  
Singh K. ◽  
Pandit K. ◽  
Mishra N.
Keyword(s):  
Drug Release ◽  
Release Rate ◽  
Polymer Concentration ◽  
Matrix Tablets ◽  
Wet Granulation ◽  
Weight Variation ◽  
Diffusion Controlled ◽  
The Matrix ◽  
Processing Techniques ◽  
Formulation Variables

The matrix tablets of cinnarizine and nimodipine were prepared with varying ratio of Carbopol- 971P and co-excipients of varying hydrophilicity (i.e. dicalcium phosphate and spray dried lactose) by direct compression and wet granulation using alcoholic mucilage. The prepared tablets were evaluated for weight variation, hardness and friability. The influence of concentration of the matrix forming material and co-excipients on the release rate of the drug was studied. The release rate of Cinnarizine (more soluble drug) from tablets followed diffusion controlled mechanism whereas for nimodipine (less soluble drug), the drug release followed case-II or super case- II transport mechanism based on Korsmeyer- Peppas equation. The results indicated that the drug release from matrix tablets was increases with increase in hydrophilicity of drug and co-excipients. The release of drug also increased with thermal treatment and decreasing polymer concentration.

Preparation and Evaluation of Gemifloxacin Mesylate Floating Matrix Tablets in Healthy Human Volunteers

2017 ◽  
Vol 10 (1) ◽  
pp. 3623-3630
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Haarika B ◽  
Jyothi Sri S ◽  
K Abbulu
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Drug Bioavailability ◽  
Floating Tablets

The purpose of present investigation was to develop floating matrix tablets of gemifloxacin mesylate, which after oral administration could prolong the gastric residence time, increase the drug bioavailability and diminish the side effects of irritating drugs. Tablets containing drug, various viscosity grades of hydroxypropyl methylcellulose such as HPMC K4M and HPMC K15M as matrix forming agent, Sodium bicarbonate as gas-forming agent and different additives were tested for their usefulness in formulating gastric floating tablets by direct compression method. The physical parameters, in vitro buoyancy, release characteristics and in vivo radiographic study were investigated in this study. The gemifloxacin mesylate floating tablets were prepared using HPMC K4M polymer giving more sustained drug release than the tablet containing HPMC K15M. All these formulations showed floating lag time of 30 to 47 sec and total floating time more than 12 h. The drug release was decreased when polymer concentration increases and gas generating agent decreases. Formulation that contains maximum concen-tration of both HPMC K15M and sodium bicarbonate (F9) showing sufficiently sustained with 99.2% of drug release at 12 h. The drug release from optimized formulation follows Higuchi model that indicates the diffusion controlled release. The best formulation (F9) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent and the tablet remained in the stomach for about 6 h.   

Formulation and Evaluation of Nelfinavir Extended Release Trilayer Matrix Tablets by Design of Experiment

2018 ◽  
Vol 11 (5) ◽  
pp. 4259-4268
Author(s):  
Nirmala Rangu ◽  
Gande Suresh
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Magnesium Stearate ◽  
Zero Order ◽  
Matrix Tablets ◽  
Drug Dissolution ◽  
Crystalline Cellulose ◽  
Dissolution Profile ◽  
Release Formulation

The present study was aimed to develop once-daily controlled release trilayer matrix tablets of nelfinavir to achieve zero-order drug release for sustained plasma concentration. Nelfinavir trilayer matrix tablets were prepared by direct compression method and consisted of middle active layer with different grades of hydroxypropyl methylcellulose (HPMC), PVP (Polyvinyl Pyrrolidine) K-30 and MCC (Micro Crystalline Cellulose). Barrier layers were prepared with Polyox WSR-303, Xanthan gum, microcrystalline cellulose and magnesium stearate. Based on the evaluation parameters, drug dissolution profile and release drug kinetics DF8 were found to be optimized formulation. The developed drug delivery system provided prolonged drug release rates over a period of 24 h. The release profile of the optimized formulation (DF8) was described by the zero-order and best fitted to Higuchi model. FT-IR studies confirmed that there were no chemical interactions between drug and excipients used in the formulation. These results indicate that the approach used could lead to a successful development of a controlled release formulation of nelfinavir in the management of AIDS.

3 (2) Factorial Design Assisted Crushed Puffed Rice-HPMC-Chitosan based Hydrodynamically Balanced System of Metoprolol Succinate

2020 ◽  
Vol 10 (3) ◽  
pp. 237-249
Author(s):  
Shashank Soni ◽  
Veerma Ram ◽  
Anurag Verma
Keyword(s):  
Drug Release ◽  
Factorial Design ◽  
Hydroxypropyl Methylcellulose ◽  
Batch Size ◽  
Metoprolol Succinate ◽  
Zero Order Kinetics ◽  
Two Factors ◽  
Puffed Rice ◽  
Model Drug

Introduction: Hydrodynamically balanced system (HBS) possesses prolonged and continuous delivery of the drug to the gastrointestinal tract which improves the rate and extent of medications that have a narrow absorption window. The objective of this work was to develop a Hydrodynamically Balanced System (HBS) of Metoprolol Succinate (MS) as a model drug for sustained stomach specific delivery. Materials and Methods: Experimental batches were designed according to 3(2) Taguchi factorial design. A total of 9 batches were prepared for batch size 100 capsules each. Formulations were prepared by physically blending MS with polymers followed by encapsulation into hard gelatin capsule shell of size 0. Polymers used were Low Molecular Weight Chitosan (LMWCH), Crushed Puffed Rice (CPR), and Hydroxypropyl Methylcellulose K15 M (HPMC K15M). Two factors used were buoyancy time (Y1) and time taken for 60% drug release (T60%; Y2). Results: The drug excipient interaction studies were performed by the thermal analysis method which depicts that no drug excipient interaction occurs. In vitro buoyancy studies and drug release studies revealed the efficacy of HBS to remain gastro retentive for a prolonged period and concurrently sustained the release of MS in highly acidic medium. All formulations followed zero-order kinetics. Conclusion: Developed HBS of MS with hydrogel-forming polymers could be an ideal delivery system for sustained stomach specific delivery and would be useful for the cardiac patients where the prolonged therapeutic action is required.

scholarly journals Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride

2011 ◽  
Vol 61 (2) ◽  
pp. 217-226 ◽  
Author(s):  
Komuravelly Someshwar ◽  
Kalyani Chithaluru ◽  
Tadikonda Ramarao ◽  
K. Kumar
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Floating Tablets ◽  
Gastric Residence Time

Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride Tizanidine hydrochloride is an orally administered prokinetic agent that facilitates or restores motility through-out the length of the gastrointestinal tract. The objective of the present investigation was to develop effervescent floating matrix tablets of tizanidine hydrochloride for prolongation of gastric residence time in order to overcome its low bioavailability (34-40 %) and short biological half life (4.2 h). Tablets were prepared by the direct compression method, using different viscosity grades of hydroxypropyl methylcellulose (HPMC K4M, K15M and K100M). Tablets were evaluated for various physical parameters and floating properties. Further, tablets were studied for in vitro drug release characteristics in 12 hours. Drug release from effervescent floating matrix tablets was sustained over 12 h with buoyant properties. DSC study revealed that there is no drug excipient interaction. Based on the release kinetics, all formulations best fitted the Higuchi, first-order model and non-Fickian as the mechanism of drug release. Optimized formulation (F9) was selected based on the similarity factor (f2) (74.2), dissolution efficiency at 2, 6 and 8 h, and t50 (5.4 h) and was used in radiographic studies by incorporating BaSO4. In vivo X-ray studies in human volunteers showed that the mean gastric residence time was 6.2 ± 0.2 h.

scholarly journals Response Surface Optimization of Sustained Release Metformin-Hydrochloride Matrix Tablets: Influence of Some Hydrophillic Polymers on the Release

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Amitava Roy ◽  
Kalpana Roy ◽  
Sarbani Roy ◽  
Jyotirmoy Deb ◽  
Amitava Ghosh ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Hydroxypropyl Methylcellulose ◽  
Dissolution Kinetics ◽  
Matrix Tablets ◽  
Metformin Hydrochloride ◽  
Wet Granulation ◽  
Matrix Tablet ◽  
Response Surface Optimization

The aim of the present work was designed to develop a model-sustained release matrix tablet formulation for Metformin hydrochloride using wet granulation technique. In the present study the formulation design was employed to statistically optimize different parameters of Metformin hydrochloride tablets at different drug-to-polymer ratios employing polymers Hydroxypropyl methylcellulose of two grades K4M and K100M as two independent variables whereas the dependent variables studied were X60, X120, T50, T90, n, and b values obtained from dissolution kinetics data. The in vitro drug release studies were carried out at simulated intestinal fluids, and the release showed a non-Fickian anomalous transport mechanism. The drug release was found to reveal zero order kinetics. The granules and the tablets were tested for their normal physical, morphological, and analytical parameters and were found to be within the satisfactory levels. There were no significant drug-polymer interactions as revealed by infrared spectra. It has been found out that on an optimum increased Hydroxypropyl methylcellulose K100M concentration and decreased Hydroxypropyl methylcellulose K4M concentration the formulations were elegant in terms of their release profiles and were found to be statistically significant and generable.

Fabrication of Shellac-Based Effervescent Floating Matrix Tablet as a Novel Carrier for Controlling of Drug Release

2013 ◽  
Vol 747 ◽  
pp. 135-138 ◽  
Author(s):  
Noppadol Chongcherdsak ◽  
Direk Aekthammarat ◽  
Chutima Limmatvapirat ◽  
Sontaya Limmatvapirat
Keyword(s):  
Drug Release ◽  
Equation Model ◽  
Matrix Tablets ◽  
Basic Knowledge ◽  
Matrix Tablet ◽  
Sustained Drug Release ◽  
Factors Affecting ◽  
Model Drug ◽  
High Level ◽  
Power Law Equation

The aim of this research was to elucidate the factors affecting drug release and buoyancy properties of effervescent shellac based matrix tablet. Theophylline was selected as a model drug and sodium bicarbonate was used as a gas forming agent. To fabricate floating matrix tablets, the model drug, gas forming agent and other excipients were blended, compressed and then annealed at 80C for 24 h. The factors affecting floating and drug release, including amount of SHL and gas forming agent were investigated. The result demonstrated that the hardness of all formulations before annealing was within the range of 60+10 N. After annealing process, the hardness was significantly increased especially for formulation containing high level of SHL. The hardness of tablets containing 55% w/w or more of SHL was more than 200 N. As increasing amount of SHL (> 35% w/w), the more sustained drug release was also observed. The results were agreed well with the increased hardness. In addition, the tablets containing 20% w/w or more of gas forming agent were floated in 0.1 N HCl for more than 10 h, suggesting the good buoyancy characteristic. The kinetics of drug release in 0.1N HCl for all formulations were both fitted with Higuchi model and power law equation model, suggesting that the main mechanism of drug release in 0.1N HCl was obeyed the diffusion process. The result from this research could provide the basic knowledge for fabricating of SHL-based floating matrix tablet through varying amount of SHL and gastric forming agent.

Sign in / Sign up

Export Citation Format

Share Document