scholarly journals Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride

2011 ◽  
Vol 61 (2) ◽  
pp. 217-226 ◽  
Author(s):  
Komuravelly Someshwar ◽  
Kalyani Chithaluru ◽  
Tadikonda Ramarao ◽  
K. Kumar
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Floating Tablets ◽  
Gastric Residence Time

Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride Tizanidine hydrochloride is an orally administered prokinetic agent that facilitates or restores motility through-out the length of the gastrointestinal tract. The objective of the present investigation was to develop effervescent floating matrix tablets of tizanidine hydrochloride for prolongation of gastric residence time in order to overcome its low bioavailability (34-40 %) and short biological half life (4.2 h). Tablets were prepared by the direct compression method, using different viscosity grades of hydroxypropyl methylcellulose (HPMC K4M, K15M and K100M). Tablets were evaluated for various physical parameters and floating properties. Further, tablets were studied for in vitro drug release characteristics in 12 hours. Drug release from effervescent floating matrix tablets was sustained over 12 h with buoyant properties. DSC study revealed that there is no drug excipient interaction. Based on the release kinetics, all formulations best fitted the Higuchi, first-order model and non-Fickian as the mechanism of drug release. Optimized formulation (F9) was selected based on the similarity factor (f2) (74.2), dissolution efficiency at 2, 6 and 8 h, and t50 (5.4 h) and was used in radiographic studies by incorporating BaSO4. In vivo X-ray studies in human volunteers showed that the mean gastric residence time was 6.2 ± 0.2 h.

Preparation and Evaluation of Gemifloxacin Mesylate Floating Matrix Tablets in Healthy Human Volunteers

2017 ◽  
Vol 10 (1) ◽  
pp. 3623-3630
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Haarika B ◽  
Jyothi Sri S ◽  
K Abbulu
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Drug Bioavailability ◽  
Floating Tablets

The purpose of present investigation was to develop floating matrix tablets of gemifloxacin mesylate, which after oral administration could prolong the gastric residence time, increase the drug bioavailability and diminish the side effects of irritating drugs. Tablets containing drug, various viscosity grades of hydroxypropyl methylcellulose such as HPMC K4M and HPMC K15M as matrix forming agent, Sodium bicarbonate as gas-forming agent and different additives were tested for their usefulness in formulating gastric floating tablets by direct compression method. The physical parameters, in vitro buoyancy, release characteristics and in vivo radiographic study were investigated in this study. The gemifloxacin mesylate floating tablets were prepared using HPMC K4M polymer giving more sustained drug release than the tablet containing HPMC K15M. All these formulations showed floating lag time of 30 to 47 sec and total floating time more than 12 h. The drug release was decreased when polymer concentration increases and gas generating agent decreases. Formulation that contains maximum concen-tration of both HPMC K15M and sodium bicarbonate (F9) showing sufficiently sustained with 99.2% of drug release at 12 h. The drug release from optimized formulation follows Higuchi model that indicates the diffusion controlled release. The best formulation (F9) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent and the tablet remained in the stomach for about 6 h.   

Development of Multiple-Unit Floating Drug Delivery System of Clarithromycin: Formulation, in vitro Dissolution by Modified Dissolution Apparatus, in vivo Radiographic Studies in Human Volunteers

Drug Research ◽  
2017 ◽  
Vol 67 (07) ◽  
pp. 412-418 ◽  
Author(s):  
Arun Reddy ◽  
Narendar Reddy
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
In Vitro Dissolution ◽  
Physical Parameters ◽  
Gastric Residence Time ◽  
Human Volunteers ◽  
Multiple Unit

AbstractClarithromycin (CM), a broad spectrum macrolide antibiotic used to eradicate H. pylori in peptic ulcer. Clarithromycin (CM) is well absorbed from the gastrointestinal tract, but has a bioavailability of 50% due to rapid biodegradation. The aim of this investigation was to increase the gastric residence time, and to control the drug release of clarithromycin by formulating into multiple unit floating mini-tablets. Floating tablets were prepared by using direct compression method with HPMC K4M and Polyox WSR 1105 as release retarded polymers and sodium bicarbonate as gas generating agent. The prepared mini-tablets were evaluated for thickness, weight variation, friability, hardness, drug content, in vitro buoyancy, swelling studies, in vitro dissolution studies by using modified Rossett-Rice test and in vivo radiographic studies in healthy human volunteers in fasting conditions. DSC analysis revealed that no interaction between drug and excipients. All the physical parameters of the tablets were within the acceptable limits. The optimized formulation (F6) had showed controlled drug release of 99.16±3.22% in 12 h, by zero-order release kinetics, along with floating lag time of 9.5±1.28 s and total floating time of 12±0.14 h. X-ray imaging studies revealed that in vivo gastric residence time of clarithromycin floating mini-tablet in the stomach was about 3.5 h. The results demonstrated that the developed floating mini-tablets of clarithromycin caused significant enhancement in gastric retention time along with sustained effect and increased oral bioavailability.

Formulation and Evaluation of Ferrous Ascorbate Floating Tablets for the Treatment of Anaemia

2019 ◽  
Vol 9 (4) ◽  
pp. 299-307
Author(s):  
Kuldeep Singh ◽  
Subheet K. Jain ◽  
Karan Razdan ◽  
Harmanpreet Singh ◽  
Nikhil S. Sahajpal ◽  
...  
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
In Vivo Studies ◽  
Wet Granulation ◽  
Floating Tablets ◽  
Gastric Residence Time ◽  
Ferrous Ascorbate

Background and Objective: Ferrous ascorbate (FA) is preferentially absorbed from the upper gastrointestinal (GI) track, and has low bioavailability due to less residence time of FA in upper GI track. In addition, FA has low solubility and stability at higher pH. The aim of this study was to prepare gastro-retentive tablets of FA in order to increase its gastric residence time and hence, bioavailability. Methods: Floating tablets of FA were prepared by wet granulation method using different retarding polymers, Povidone K30 as binder and sodium bicarbonate as effervescent agent. The prepared floating tablets were compared with immediate release (IR) tablets and characterized in detail for in vitro and in vivo studies. Results: In-vitro drug release study of the optimized batch showed 96% drug release in 12 h in 0.1 N HCl. The mechanism of drug release from the floating tablets was non-fickian and release kinetics was best fit in peppas model. The gastric retention time of optimized was found to be significantly increased (6 h) in comparison with IR tablet (<1h). Further, bioavailability was also found significantly increased (>70%) in comparison with IR tablet (15-30%). X-ray studies carried on healthy rabbits suggested that the optimized batch remained buoyant in gastric contents up to 6 h and pharmacokinetic study showed sustained released behaviour of optimized batch in comparison to conventional IR tablet. Conclusion: Floating tablet of FA improved the bioavailability of iron by increasing its gastric residence time, hence it could be a better approach for treating iron deficiency and help in improving the patient compliance than IR tablets.

scholarly journals Development and evaluation of gastroretentive norfloxacin floating tablets

2009 ◽  
Vol 59 (2) ◽  
pp. 211-221 ◽  
Author(s):  
Ramesh Bomma ◽  
Rongala Swamy Naidu ◽  
Madhusudan Yamsani ◽  
Kishan Veerabrahma
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Wet Granulation ◽  
Drug Bioavailability ◽  
Floating Tablets

Development and evaluation of gastroretentive norfloxacin floating tabletsFloating matrix tablets of norfloxacin were developed to prolong gastric residence time, leading to an increase in drug bioavailability. Tablets were prepared by the wet granulation technique, using polymers such as hydroxypropyl methylcellulose (HPMC K4M, HPMC K100M) and xanthan gum. Tablets were evaluated for their physical characteristics,viz., hardness, thickness, friability, and mass variation, drug content and floating properties. Further, tablets were studied forin vitrodrug release characteristics for 9 hours. The tablets exhibited controlled and prolonged drug release profiles while floating over the dissolution medium. Non-Fickian diffusion was confirmed as the drug release mechanism from these tablets, indicating that water diffusion and polymer rearrangement played an essential role in drug release. The best formulation (F4) was selected based onin vitrocharacteristics and was usedin vivoradiographic studies by incorporating BaSO4. These studies revealed that the tablets remained in the stomach for 180 ± 30 min in fasting human volunteers and indicated that gastric retention time was increased by the floating principle, which was considered desirable for the absorption window drugs.

scholarly journals DEVELOPMENT AND IN VITRO–IN VIVO EVALUATION OF GASTRORETENTIVE FLOATING TABLETS OF AN ANTIRETROVIRAL AGENT RITONAVIR

2019 ◽  
pp. 436-443
Author(s):  
SHIREESH KIRAN R ◽  
CHANDRA SHEKAR B ◽  
NAGENDRA BABU B
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Extended Release ◽  
In Vitro Dissolution ◽  
Floating Tablets ◽  
Gastric Residence Time ◽  
Dissolution Studies ◽  
Evaluation Parameters

Objective: The present research work concerns the development of the extended release of Ritonavir floating matrix tablets, designed to prolong the gastric residence time, increase the drug bioavailability, and diminish the side effects of irritating drugs. Methods: The floating tablets of Ritonavir were prepared by direct compression method using different grades of hydroxypropyl methylcellulose (HPMC), crospovidone, Polyox WSR 303, and sodium bicarbonate, as gas generating agent. Evaluation parameters and in vivo radiographic studies were conducted in suitable model. Results: Among all formulations, F21 was chosen as optimized formulation based on evaluation parameters such as floating lag time (33 s), total floating time (>24 h), and in vitro dissolution studies. From in vitro dissolution studies, the optimized formulation F21 and marketed product were shown 98.67% and 91.46±5.02% of drug release, respectively. The main appliance of medication discharge follows zero-order kinetics and non- Fickian transport by coupled diffusion and erosion. In vivo experiments maintained the potentials in extending the gastric residence time in the fasted state in beagle dogs. The mean gastric residence time of the optimized formulation found to be 330 min±40 in the stomach, where longer gastric residence time is an important condition for prolonged or controlled drug release and also for enhanced bioavailability. Conclusion: From in vitro and in vivo radiographic studies, Ritonavir floating tablets estimated to provide novel choice for harmless, inexpensive, and extended release for the effective management of AIDS.

Development and In Vitro – In Vivo Evaluation of Gastro-retentive Floating Tablets Containing Repaglinide

2018 ◽  
Vol 11 (2) ◽  
pp. 4026-4036
Author(s):  
Poornima P ◽  
Abbulu K ◽  
Mukkanti K
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Chemical Properties ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Drug Bioavailability ◽  
In Vivo Evaluation ◽  
Gastric Residence Time

The present investigation concerns the development of the repaglinide floating matrix tablets, which after oral administration are designed to prolong the gastric residence time, increase the drug bioavailability and diminish the side effects of irritating drugs. FTIR studies revealed that there is no interaction between the drug and polymers used for the formulation. Among all the formulations F21 containing HPMC K1500 PH PRM, Polyox WSR-303 and Sodium bicarbonate, as gas generating agent was selected as optimized formulation based on physico chemical properties, floating lag time (36 sec) and total floating time (>24 h). From in vitro dissolution studies, the optimized formulation F21 showed drug release of 98.92±5.19% within 24h whereas 95.09±5.01% of the drug was released from the marketed product within 1h. The major mechanism of drug release follows zero order kinetics and non-Fickian transport by coupled diffusion and erosion. In vivo experiments supported the expectations in prolonging the gastric residence time in the fasted state in beagle dogs. The mean gastric residence time for the tested tablets was 270 min±60. This result is encouraging, because a longer gastric residence time is an important condition for higher bioavailability of the drugs included in the prolonged or controlled release dosage forms.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals FORMULATION AND IN-VITRO EVALUATION OF THEOPHYLLINE HYDROCHLORIDE EFFERVESCENT FLOATING TABLETS: EFFECT OF POLYMER CONCENTRATION ON TABLET BUOYANCY

2019 ◽  
pp. 59-65
Author(s):  
AKPABIO E. I. ◽  
EFFIONG D. E. ◽  
UWAH T. O. ◽  
SUNDAY N. I.
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Controlled Drug Release ◽  
Fickian Diffusion ◽  
Wet Granulation ◽  
Floating Tablets ◽  
Swelling Characteristics

Objective: This study was undertaken to formulate a floating drug delivery system of theophylline hydrochloride using different concentrations of a chosen polymer and then investigate how polymer concentration affects buoyancy and drug release properties of the tablets. Methods: Hydroxypropyl methylcellulose (HPMC) at different concentration levels of 15% (F1), 20% (F2) and 30% (F3) was used to form the three formulation batches of floating tablets. Wet granulation method was used for the granule preparation while Sodium bicarbonate and citric acid were used as the gas generating agent. The physical properties of the granules and the floating tablets were evaluated. Also determined were the physicomechanical properties, buoyancy and swelling characteristics of the tablets. The in vitro drug release study was carried out according to the USP I (basket method) for 8h in 900 ml 0.1N HCl at 50 rpm. Samples withdrawn at the regular predetermined time were analyzed spectrophotometrically at a wavelength of 271 nm and data obtained statistically analyzed by one-way analysis of variance (ANOVA). The differences between means were considered significant at P<0.05. Results: The result showed that polymer (HPMC) concentration significantly (p>0.05) increased swelling index and improved floating lag time, it had no significant effect on the total floating time. Percentage drug release at the end of 8 h was 100%, 98.2% and 96.13% for formulation F1, F2 and F3, respectively. All three formulations followed the Higuchi drug release kinetics model and the mechanism of drug release was the non Fickian diffusion with exponents of 0.46, 0.51 and 0.56 for the respective batch. Conclusion: Batch F3 gave a better-controlled drug release and floating properties in comparison to batch F1 and F2 thus Polymer concentration influenced the onset of floating and controlled the release of Theophylline.

scholarly journals FORMULATION AND EVALUATION OF FLOATING MATRIX TABLETS OF LEVOFLOXACIN HEMIHYDRATE USING HYDROXYPROPYL METHYLCELLULOSE K4M TO TREAT HELICOBACTER PYLORI INFECTION

2018 ◽  
Vol 11 (6) ◽  
pp. 148
Author(s):  
Srinivasa Rao Baratam ◽  
Vijayaratna J
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Linear Regression Method ◽  
In Vitro Drug Release ◽  
Sustained Drug Delivery

Objective: The aim of the study was to develop a floating drug delivery system of levofloxacin (LVF) hemihydrate for sustained drug delivery to improve the extended retention in the stomach, oral bioavailability, and local site-specific action in the stomach. Methods: Preparation of LVF tablets using melt granulation method using hydroxypropyl methylcellulose (HPMC) K4M with sodium bicarbonate as gas generating agent. From LFTA1 to LFTA5, formulations were developed and evaluated for floating properties for swelling characteristics and in vitro drug release studies. In vitro dissolution was carried out using USP II paddle method using 0.1N HCI pH buffer at 50 rpm and samples were measured at 294 nm using ultraviolet-visible spectroscopy. Results: Obtained Fourier-transform infrared charts indicated that there is no positive evidence for the interaction between LVF and ingredients of the optimized formula. In vitro drug release was performed and drug release kinetics were evaluated using the linear regression method and were found to be followed the zero-order release by diffusion controlled release. Optimized formula was found to be LFTA4 with 20% of a polymer with 99.03% of drug release with 12 h of floating time and 32 s floating lag time. Conclusion: Matrix tablets (LFTA4) formulated employing 20% HPMC K4M are best suited to be used for gastroretentive dosage form of LVF.

scholarly journals Formulation, Optimization and in vitro Characterization of Stavudine Gastro Retentive Floating Matrix Tablets

2016 ◽  
Vol 8 (03) ◽  
Author(s):  
Mahendar Rupavath ◽  
Kranthi G. ◽  
Chinna Palem ◽  
K. S. K. Patnaik
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Release Mechanism ◽  
Wet Granulation ◽  
Drug Bioavailability ◽  
In Vitro Drug Release ◽  
Weight Variation

The aim of the present investigation was to develop floating matrix tablets of stavudine to achieve prolong gastric residence time, leading to an increase in drug bioavailability and patient compliance. Floating tablets were prepared by wet granulation technique, using hydroxypropyl methylcellulose (HPMC K15M) as synthetic, pullulan gum as natural rate controlling polymers and optimum amounts of sodium-bicarbonate and citric acid as gas generating agents in suitable ratios to generate optimum buoyancy. Developed formulations were evaluated for weight variation, thickness, hardness, friability, drug content, in vitro drug release, floating lag time and floating buoyancy. All the formulations exhibited acceptable physical properties and the best formulation (F3) was selected based on in vitro characteristics. Further, the optimized formulation was evaluated for in vivo radiographic studies by incorporating BaSO4 as radio opaque substance. All the formulations were studied for in vitro drug release characteristics for 16 h. Optimized formulation showed controlled and prolonged drug release profiles while floating over the dissolution medium. Diffusion followed by erosion drug release mechanism was observed for the formulation, indicating that water diffusion and polymer erosion played an essential role in drug release. In vivo radiographic studies revealed that the tablets remained in the stomach for 8 ± 0.5 h in fasting human volunteers and indicated that gastric retention time was increased by the floating principle, which was considered and desirable for absorption window drugs.

Sign in / Sign up

Export Citation Format

Share Document