Sucking Machinery of Transport for Dosing Granulations of Plastics at Injection Molding

2011 ◽  
Vol 383-390 ◽  
pp. 2813-2818 ◽  
Author(s):  
Emil Ragan ◽  
Petr Baron ◽  
Jozef Dobránsky
Keyword(s):  
Injection Molding ◽  
Rapid Development ◽  
Processing Method ◽  
Molding Machine ◽  
Injection Molding Machine ◽  
Plastic Materials ◽  
Plastics Processing ◽  
Pneumatic Method ◽  
Time Injection

Advantageous properties of plastic materials, low investment costs for a production, cheap and productive processing method were given the rapid development of plastic materials. In this time injection molding technology is the most using technology for processing plastics in our country. Quality of the plastics processing depends mainly on the quality of material and preparing it for production. The first step in the processing of plastic by injection molding is dosing of granulations from hopper of injection machine unit. Task of this contribution is to theoretically describe a pneumatic method for transport of granulations in injection molding machine.

Multi-Objective Optimization Design for Double Toggle Clamping Unit of Injection Molding Machine

2012 ◽  
Vol 201-202 ◽  
pp. 15-19
Author(s):  
Chen Jian Lei ◽  
Jun He Yu ◽  
Hong Fei Zhan ◽  
Lei Chen ◽  
Zhong Ren Jiang
Keyword(s):  
Injection Molding ◽  
Optimization Design ◽  
Optimization Method ◽  
Productive Efficiency ◽  
Molding Machine ◽  
Original Design ◽  
Injection Molding Machine ◽  
Amplification Ratio ◽  
Better Than

Clamping unit is an important component of injection molding machine. The clamping force and the clamping speed of clamping unit not only effect on the quality of molding products, but also determine the cyclic number. The large force amplification and large stroke ratio can reduce energy consumption and improve the productive efficiency. In this article, force amplification ratio and stroke ratio were used as the optimization goals. Non-dominated sorting genetic algorithm was used as the optimization method. The optimization result was better than the original design. So this article provides a reference for the same or similar product’s optimization.

Choice and Exchange of Lubricating Oil for Injection Molding Machine

2019 ◽  
Vol 12 (4) ◽  
pp. 378-382
Author(s):  
Shan Syedhidayat ◽  
Quan Wang ◽  
Al-Hadad M.A.A. Mohsen ◽  
Jinrong Wang
Keyword(s):  
Injection Molding ◽  
Dimensional Accuracy ◽  
Low Noise ◽  
Working Environment ◽  
Lubricating Oil ◽  
Lubrication System ◽  
Molding Machine ◽  
Oil And Grease ◽  
Injection Molding Machine ◽  
The Stability

Background: One of the most common manufacturing equipment for polymer product is injection molding machine. In order to ensure the precise, stable and continuous operation of the injection molding machine, the maintenance of the lubrication system must be done well. The stability, reliability, rationality and low noise performance of the lubrication system of injection molding machine directly affect the quality of injection products, dimensional accuracy, molding cycle, working environment and maintenance. Objective: The purpose of this study is to introduce the methods of choice, maintenance of lubricating oil for injection molding machine from many literatures and patents in the recent years, such as lubricating oil device, lubricating composite and structure. Methods: An example of the 260M5 automatic injection molding machine is introduced for the inspection and maintenance of the lubrication system including lubricating oil and lubricating grease. Results: To ensure the lubrication of the injection molding machine, it needs to strictly observe the lubrication time and modulus of the injection molding machine. It needs to strictly control the temperature rise of the lubricating oil and select the correct lubricating oil and grease to ensure the lubrication quality. Conclusion: In the operation of the injection molding machine, it is necessary to check that the lubricating oil is sufficient and the lubricating points are working properly. It ensures sufficient lubrication of the injection molding machine and strictly observes the lubrication time and modulus of the injection molding machine. The stored lubricating oil should be sealed well to prevent air pollution.

Analysis on vibration characteristics of screw in filling process of dynamic injection molding machine

2016 ◽  
Vol 36 (8) ◽  
pp. 861-866 ◽  
Author(s):  
Quan Wang ◽  
Zhenghuan Wu
Keyword(s):  
Injection Molding ◽  
Processing Parameters ◽  
Axial Vibration ◽  
Filling Process ◽  
Molding Machine ◽  
Lumped Mass ◽  
Injection Molding Machine ◽  
Injection Speed ◽  
And Performance ◽  
Injection Screw

Abstract This paper presents a study of the characteristics of axial vibration of a screw in the filling process for a novel dynamic injection molding machine. By simplifying a generalized model of the injection screw, physical and mathematic models are established to describe the dynamic response of the axial vibration of a screw using the method of lumped-mass. The damping coefficient of the screw is calculated in the dynamic filling process. The amplitude-frequency characteristics are analyzed by the simulation and experimental test of polypropylene. The results show that the amplitude of a dynamic injection molding machine is not only is related to structure parameters of the screw and performance of the material, such as non-Newtonian index, but also depends on the processing parameters, such as vibration intensity and injection speed.

Based on Vector Control of All-Electric Injection Molding Machine Control System Design

2012 ◽  
Vol 490-495 ◽  
pp. 2210-2214
Author(s):  
Ming Hui Li ◽  
Zheng Qi Li
Keyword(s):  
Control System ◽  
Injection Molding ◽  
Vector Control ◽  
System Design ◽  
High Reliability ◽  
Permanent Magnet Synchronous Motor ◽  
Control System Design ◽  
Molding Machine ◽  
Injection Molding Machine ◽  
Machine Control

According to the all-electric injection molding machine control system requirements, the vector control applied to the permanent magnet synchronous motor control, we propose a fully electric injection molding machine control system design, through analysis and research that can further improve the program precise all-electric injection molding machine control, its stability, high reliability, to better meet the all-electric injection molding machine of precision and stability requirements.

Sign in / Sign up

Export Citation Format

Share Document