Dynamic Characteristics Analysis and Optimization Design of Spindle Box with FEA

2012 ◽  
Vol 490-495 ◽  
pp. 2273-2277 ◽  
Author(s):  
Xiao Peng Li ◽  
Wei Wang ◽  
Mi Que Zhao ◽  
Xiao Chen Meng
Keyword(s):  
Finite Element ◽  
Shape Optimization ◽  
Objective Function ◽  
Natural Frequency ◽  
Dynamic Characteristics ◽  
Optimization Design ◽  
Static And Dynamic Characteristics ◽  
Maximum Deformation ◽  
Characteristics Analysis ◽  
Dynamic Characteristics Analysis

The simplified finite element modal was established with ANSYS aiming to study the spindle box. The changing regularity of the first 6-order natural frequency of spindle box was studied after the static and modal analysis. Shape optimization design was carried out by taking the maximum deformation of the direction of X，Y，Z as the objective function. The results show that the structure of spindle box after optimization can effectively reduce the maximum deformations of the direction of X，Y，Z，and has better static and dynamic characteristics.

Finite Element Modal Analysis of the Cable-Stayed Bridge

2013 ◽  
Vol 438-439 ◽  
pp. 883-885
Author(s):  
Ji Lin Wu ◽  
Chun Cao Song
Keyword(s):  
Finite Element ◽  
Natural Frequency ◽  
Dynamic Characteristics ◽  
Natural Vibration ◽  
Vibration Mode ◽  
Beam Elements ◽  
Cable Stayed Bridge ◽  
Characteristics Analysis ◽  
Natural Vibration Mode ◽  
Dynamic Characteristics Analysis

In the process of modeling, ignoring the displacement of the pier directly replaced with fixed constraint, beam elements were adopted to simulate girder and pylon, and link elements were adopted to simulate the cable. The first ten order natural vibration mode and natural frequency were obtained, and the dynamic characteristics analysis of a single pylon cable-stayed bridge was discussed, which can provide certain reference and guidance for solving the problem of the cable-stayed bridge design.

Static and Dynamic Characteristics Analysis of Precise Composite CNC Grinding Machine

2011 ◽  
Vol 411 ◽  
pp. 88-93
Author(s):  
Hong Lin Zhao ◽  
Yun Fei Sun ◽  
Rui Chen ◽  
Yu Mei Huang ◽  
Guang Peng Zhang ◽  
...  
Keyword(s):  
Finite Element ◽  
Dynamic Characteristics ◽  
Element Model ◽  
Machine Model ◽  
Static And Dynamic Characteristics ◽  
Cnc Grinding ◽  
Characteristics Analysis ◽  
The Subject ◽  
Grinding Machine ◽  
Cnc Grinding Machine

The parameters of joint parts must be included in the finite element model of a whole grinding machine. The subject investigated in this paper is B2-K3000 high-precision composite flexible grinding machine. Through finite element modeling, the joint part parameters are integrated into the whole grinding machine model to establish a dynamic model and then analyze its static and dynamic characteristics. The result shows that the whole grinding machine possesses good features, but it still needs to be improved. This paper gives suggestions for its structure development and application.

Dynamic Characteristics Analysis and Structural Topology Optimization of the Plane Grinder

2016 ◽  
Vol 693 ◽  
pp. 471-478
Author(s):  
Rui Tao Peng ◽  
Wang Yan ◽  
Xin Zi Tang ◽  
Zhuan Zhou
Keyword(s):  
Machine Tool ◽  
Dynamic Characteristics ◽  
Weak Link ◽  
Element Model ◽  
Variable Density ◽  
Structural Topology ◽  
Static And Dynamic Characteristics ◽  
Before And After ◽  
Characteristics Analysis ◽  
Dynamic Characteristics Analysis

The dynamic characteristic is one of the important indicators which determine the performance of a machine tool, in this paper, the finite element model of a plane grinder is established with consideration of the behavior of joint, the static dynamic characteristics of machine tools are analyzed to reveal the vibration weak link, the column structure is topology optimized and redesigned based on the variable density degradation method. Static and dynamic characteristics of the original and new column are compared, and the dynamic characteristics of the machine tool before and after modification are discussed. The results indicate that the static and dynamic characteristics of the plane grinder are all improved after optimization.

Static and Dynamic Characteristics Analysis of HTM125 Milling Complex Machining Center Column

2014 ◽  
Vol 1077 ◽  
pp. 191-196
Author(s):  
Yu Hou Wu ◽  
Yu Hang Ren ◽  
De Hong Zhao ◽  
Feng Lu
Keyword(s):  
Dynamic Characteristics ◽  
Three Dimensional ◽  
Mode Shapes ◽  
Three Dimensional Model ◽  
Static And Dynamic Characteristics ◽  
Machining Center ◽  
Characteristics Analysis ◽  
Object Of Study ◽  
Five Axis ◽  
Dynamic Characteristics Analysis

The column of heavy double turret five-axis horizontal milling complex machining center is taken as the object of study. Solidworks is used to establish three-dimensional model of milling machining center column, the established modal is be imported into ANSYS Workbench for static and dynamic characteristics analysis. First, by comparing the column deformation, the stress and strain under no-load and load conditions, which is concluded that column design is too conservative and be optimized. Secondly, the modal analysis was carried out on the column, which provides a theoretical basis for the optimization of the column by getting the first six natural frequencies and mode shapes of cloud.

Improved Design of 2-DOF Micro-Positional Stage Based on Parallel Structure with Flexible Sheet

2012 ◽  
Vol 201-202 ◽  
pp. 24-29
Author(s):  
Shao Yong Zheng ◽  
Yu Guo Cui ◽  
Fan Fang
Keyword(s):  
Finite Element ◽  
Natural Frequency ◽  
Dynamic Characteristics ◽  
Optimization Method ◽  
Linear Displacement ◽  
Parallel Structure ◽  
Static And Dynamic Characteristics ◽  
Output Displacement ◽  
Finite Element Software ◽  
Improved Design

In order to obtain good static and dynamic characteristics of the 2-DOF micro-positional stage, improved design of developed stage were done. First, the part of displacement coupling for the stage was improved, which making the stage only have linear displacement at driving direction; Second, in order to acquire the highest natural frequency under the condition of given output displacement, micro-positional stage was designed by using the size optimization method. Finally, the static and dynamic characteristics of the stage were analyzed by the finite element software ANSYS. The finite element results show that: the stage completely eliminates the displacement coupling after improving design; under the condition of given 30 μm output displacement, natural frequency reaches 1.86 kHz.

Dynamic Characteristic Analysis of CNC Turret Punch Servo Beam

2016 ◽  
Vol 836-837 ◽  
pp. 522-528
Author(s):  
Yan Jun Guo
Keyword(s):  
Dynamic Characteristics ◽  
Optimization Design ◽  
Natural Frequencies ◽  
Element Model ◽  
Mode Shapes ◽  
Characteristic Analysis ◽  
Boundary Constraints ◽  
Modeling Methodology ◽  
Characteristics Analysis ◽  
Dynamic Characteristics Analysis

This paper resolved CNC turret punch cause vibration phenomenon in the course of processing sheet,analysis of its dynamic characteristics of the beam servo feed mechanism, using the method of constrained modal analysis.Through the establishment of finite element model exactly for the servo beam and setting the boundary elastic restraint stiffness, solving the natural frequencies and mode shapes of the servo beam under boundary constraints and loading conditions. Constraints modal analysis results are consistent with experimental monitoring results of CNC turret punch servo beam. This modeling methodology and results of the analysis has a high practical value for CNC turret punch dynamic characteristics analysis and structural optimization design.

Static and Dynamic Characteristics Analysis of a High Speed CNC Lathe Feeding System

2012 ◽  
Vol 472-475 ◽  
pp. 2052-2058
Author(s):  
Ping Liao ◽  
Fang Ping Deng ◽  
Rui Ming Ding ◽  
Yu Xin Wu
Keyword(s):  
Finite Element ◽  
Dynamic Characteristics ◽  
High Speed ◽  
Element Model ◽  
Feeding System ◽  
Test Results ◽  
Static And Dynamic Characteristics ◽  
Cnc Lathe ◽  
Characteristics Analysis ◽  
Stress And Deformation

This paper focuses on the static and dynamic characteristics of a high speed CNC lathe feeding system, which is analyzed by using the Finite Element Method (FEM). In this study, the location of the maximum stress and deformation is demonstrated and checked, natural frequency and corresponding vibration modes is extracted and analyzed respectively, and the way to build finite element model is simply conducted. Furthermore, vibration testing of the feeding system in X, Y, Z-Direction is carried out respectively, both the theoretical analysis and test results show good agreement with each other. Finally, some conclusions and reviews are made based on the analysis results, which provide some reliable basis for the reasonable operation and static and dynamic characteristics’ improvement for the feeding system.

Sign in / Sign up

Export Citation Format

Share Document