A New Type Thermal Insulation Fireproofing Wallboard

2012 ◽  
Vol 594-597 ◽  
pp. 2197-2200 ◽  
Author(s):  
Xian Li Wang ◽  
Lin Wang
Keyword(s):  
Energy Saving ◽  
Thermal Insulation ◽  
Material Selection ◽  
Building Energy ◽  
Existing Building ◽  
Process Characteristics ◽  
New Type ◽  
Insulation Effect ◽  
Building Energy Saving ◽  
Type Composite

Exterior thermal insulation technology has many advantages such as light weight, good thermal insulation effect, and so on. So it is widely used in energy-saving building and existing building energy-saving renovation project all over the word. This article describes material selection, product performance and process characteristics of a new type composite phenolic wallboard which has double functions of thermal insulation and fireproofing.

Insulation and Fireproof Performance of Several New Materials for Exterior Wall

2012 ◽  
Vol 174-177 ◽  
pp. 1290-1293
Author(s):  
Jia Wei Yao ◽  
Zhao Ming Hou ◽  
Yi Shu Yao
Keyword(s):  
Energy Saving ◽  
Thermal Insulation ◽  
Building Energy ◽  
Insulation Material ◽  
Exterior Wall ◽  
New Materials ◽  
Thermal Insulation Material ◽  
External Wall ◽  
Insulation Effect ◽  
Building Energy Saving

Exterior insulation is currently promoting a building energy-saving insulation technology. Compared with internal insulation, it is a reasonable technique and has its obvious advantages. However, in the insulation material, thermal insulation effect is better, fireproof performance is often worse. Through analyzing several external wall insulation materials’ insulation and fireproof performance, the article recommends a kind of external wall thermal insulation material with good insulation and fireproof performance, to meet the construction needs.

scholarly journals Problems and Prospects of Nanometer Transparent Infrared Thermal Insulation Glass

2018 ◽  
Vol 53 ◽  
pp. 01013
Author(s):  
Nan Zhang ◽  
Mengyuan Xu ◽  
Ning Li
Keyword(s):  
Energy Conservation ◽  
Visible Light ◽  
Energy Saving ◽  
Building Energy ◽  
Light Transmittance ◽  
Large Area ◽  
Existing Building ◽  
Economic Application ◽  
Performance Indexes ◽  
Building Energy Saving

The existing building energy-saving reconstruction has a large area in our country. If the performance indexes such as the shading coefficient, visible light transmittance and hardness of the coating heat-insulating glass are in the condition of reaching the specification, and it can meet the needs of energy conservation and reform in building, it is a suitable technology for economic application.

Analysis Application Research of an Improved Value Coefficient Method in the Scheme Optimization of the Existing Building Energy Saving Reconstruction

2011 ◽  
Vol 243-249 ◽  
pp. 7009-7017
Author(s):  
Yong Xiang Wang ◽  
Li Xie
Keyword(s):  
Energy Saving ◽  
Building Energy ◽  
Triangular Fuzzy Number ◽  
Analysis Model ◽  
Existing Building ◽  
Reconstruction Scheme ◽  
Cost Coefficient ◽  
Analysis Application ◽  
Building Energy Saving ◽  
The Cost

The paper aims to provide a new way for energy saving reconstruction scheme optimization.In order to seek the most reasonable and scientific energy saving reconstruction scheme for the existing buildings.The writers introduce an improved value coefficient method.In the method,the triangular fuzzy number is employed to determine the weights of the function sub-indexes.The paper also proposes that the cost coefficient should adopt the annual value of the life cycle cost.And then the writers establish a corresponding analysis model and offer a detailed elaboration on its application based on a project case of existing building energy saving reconstruction.

The Thermal Insulation Performance of Envelope Construction of Residential Housing – A Case Study of Detached Houses in Yilan, Taiwan

2014 ◽  
Vol 909 ◽  
pp. 450-454
Author(s):  
Hung Ren Hsieh ◽  
Chih Hao Lee
Keyword(s):  
Energy Saving ◽  
Thermal Insulation ◽  
Building Energy ◽  
Residential Housing ◽  
Improvement Project ◽  
Steel Framing ◽  
Building Energy Saving ◽  
The Common ◽  
Insulation Performance

This research aims to study the design and thermal insulation performance of detached houses in Taiwan through the analysis of 55 detached houses. The research shows that 85% of detached houses are built using reinforced concrete (RC) construction, and the rest mostly using lightweight steel framing (LSF) construction. The thermal insulation performance of envelope construction of RC housing is poorer than LSF housing. More than 80% of the case study sample could not meet the roof thermal insulation requirements of Taiwans latest regulations on housing building energy saving. The most commonly used thermal insulation materials are polystyrene board, glass wool and rock wool, which are nearly all applied in LSF housings for the internal thermal insulation layer or the structural body layer of envelope construction. Polystyrene board has the widest range of use, including both internal and external thermal insulation layers of the envelope construction. If improving thermal insulation performance of the common envelope construction concluded from case study samples to meet Taiwans latest regulations on housing building energy saving, of the savings on air-conditioning energy during the summer could potentially be 11.5%. However, above improvement project is not economically beneficial due to the too long payback period.

Thermal Performance Test of the New Sandwich Insulation Composite Wall Panels

2013 ◽  
Vol 676 ◽  
pp. 22-26 ◽  
Author(s):  
Jian Guo Yang ◽  
Gang Wang ◽  
Ke Wei Ding
Keyword(s):  
Energy Saving ◽  
Thermal Insulation ◽  
Thermal Performance ◽  
Performance Test ◽  
Building Energy ◽  
Insulation Property ◽  
Element Analysis ◽  
Wall Panels ◽  
Composite Wall ◽  
Building Energy Saving

This paper research applied to using energy-saving insulation in hot summer and warm winter area of sandwich wall panels, study on thermal insulation thermal insulation property of composite wall panel through 2 sets of thermal performance test, and the test results for comparative analysis with finite element analysis results. The analysis shows that the wallboard is not only good insulation properties, but also to meet the requirements prescribed by the state building energy-saving insulation and hot summer Cold Winter areas of building energy-saving insulation requirements.

Research of Existing Building Energy Saving Economic Incentives Policy in Liao Ning Province

2013 ◽  
Vol 409-410 ◽  
pp. 570-573
Author(s):  
Shen Sheng Zhang ◽  
Wei Zhang ◽  
Xing Xing Ji ◽  
Wen Fang Zhang
Keyword(s):  
Energy Saving ◽  
Building Energy ◽  
Developed Countries ◽  
Economic Incentive ◽  
Economic Incentives ◽  
Liaoning Province ◽  
Existing Building ◽  
The Status ◽  
Building Energy Saving ◽  
The Developed Countries

Analyzed the status of Liaoning Province Existing Building Energy Saving, and elaborate the role of economic incentives in the Existing Building Energy Saving. Proposed the establish principles and design ideas of Existing Building Energy Saving economic incentive policies in Liao Ning Province on the basis of learning from the developed countries economic incentives successful experience. Developed economic incentives on taxation, loans, and subsidies and so on.

Building External Wall Thermal Insulation Construction Quality Safety Measures Analysis

2012 ◽  
Vol 253-255 ◽  
pp. 646-649
Author(s):  
Xin Hua Zhang ◽  
Jian Xin Liu ◽  
Hong Zhuan Zhang
Keyword(s):  
Thermal Insulation ◽  
Material Selection ◽  
Building Energy ◽  
Insulation Material ◽  
Safety Measures ◽  
External Wall ◽  
Building Energy Saving ◽  
Wall Construction ◽  
Paper Insulation

The external wall thermal insulation technology in building energy saving is widely used in engineering, but in general it faces some quality security problems, this paper insulation material selection, exterior insulation system and its safety, fire redundancy and external wall construction corresponding measures on the analysis. So as to the engineering quality safety problems have prevention in the role of the external wall thermal insulation technology obtain the considerable development.

Study on Energy Saving of External Wall Thermal Insulation Based on City Green Building

2014 ◽  
Vol 608-609 ◽  
pp. 1061-1065
Author(s):  
Lei Cao ◽  
Xue Nan Mu
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Energy Saving ◽  
Thermal Insulation ◽  
Green Building ◽  
Building Energy ◽  
External Wall ◽  
Building Energy Saving ◽  
Energy Saving Technology ◽  
The City

In recent years, with the continuous development of society, people's awareness of energy conservation has also been enhanced. Among them, building energy consumption occupies a very large proportion in all their energy consumption. Therefore, people have taken various measures to reduce the energy consumption of building its own. External wall thermal insulation is a new building energy saving technology. Through verification, application of external wall insulation technology in building energy saving greatly reduces the energy consumption of buildings. This paper mainly introduced on the city building external wall thermal insulation technology and some related measures.

Building Energy-Saving Technology

2012 ◽  
Vol 472-475 ◽  
pp. 469-472 ◽  
Author(s):  
Bing Nan Liu ◽  
Qiong He
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Thermal Insulation ◽  
Building Energy ◽  
Living Standard ◽  
External Wall ◽  
Building Energy Saving ◽  
Energy Saving Technology ◽  
Reduce Energy Consumption ◽  
Day By Day

With the improvement of people's living standard, the building energy consumption is increasing day by day. In order to reduce energy consumption, we should develop energy-saving building and analyze building energy saving technology. This article mainly introduces three kinds of energy saving technology which include the external wall thermal insulation technology, doors and Windows energy saving technology and roof insulation technology.

Sign in / Sign up

Export Citation Format

Share Document