Analysis of Axial Bearing Capacity of Concrete-Filled Steel Tube Hollow Columns

2013 ◽  
Vol 639-640 ◽  
pp. 770-773
Author(s):  
Xiao Yan Luo ◽  
Wei Ping Liu
Keyword(s):  
Bearing Capacity ◽  
Principal Stress ◽  
Yield Criterion ◽  
Steel Tube ◽  
Ultimate Bearing Capacity ◽  
Intermediate Principal Stress ◽  
Stress Effect ◽  
Concrete Filled Steel Tube ◽  
Effect Parameter ◽  
Intermediate Principal Stress Effect

Based on the triple shear unified yield criterion, the mechanical behavior of the concrete-filled steel tube columns was analyzed. The calculation formulas of axial bearing capacity of the concrete-filled steel tube columns were deduced with considerations of the restriction effects of steel tube and the effects of the intermediate principal stressed. The results show that the intermediate principal stress effect parameter b has influences on the ultimate bearing capacity. With the increase of the intermediate principal stress effect parameter b, the ultimate bearing capacity of the concrete-filled steel tube columns increases too. The results show that formula deduced in the paper has good applicability and the solution has an important practical value.

Mechanics Behavior of Concrete-Filled Square Steel Tube Columns

2012 ◽  
Vol 256-259 ◽  
pp. 662-665
Author(s):  
Xiao Yan Luo ◽  
Wei Ping Liu
Keyword(s):  
Bearing Capacity ◽  
Principal Stress ◽  
Analytical Method ◽  
Yield Criterion ◽  
Steel Tube ◽  
Intermediate Principal Stress ◽  
Stress Effect ◽  
Effect Parameter ◽  
Intermediate Principal Stress Effect ◽  
Square Steel Tube

This study presents a simplified analytical method for predicting the ultimate strength of compressed concrete filled square steel tube columns based on the triple shear unified yield criterion. Based on the triple shear unified yield criterion theory solutions of thick tube, the calculation formulas of axial bearing capacity of the concrete-filled square steel tube columns were deduced with considerations of the restriction effects of steel tube and the effects of the intermediate principal stressed. The results show that the intermediate principal stress effect parameter b has influences on the ultimate bearing capacity. The formulas in the paper have significance in exerting material potential and save material.

scholarly journals Ultimate Bearing Capacity of Strip Foundations in Unsaturated Soils considering the Intermediate Principal Stress Effect

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Qing Yan ◽  
Junhai Zhao ◽  
Changguang Zhang ◽  
Jintai Wang
Keyword(s):  
Bearing Capacity ◽  
Principal Stress ◽  
Unsaturated Soils ◽  
Matric Suction ◽  
Ultimate Bearing Capacity ◽  
Intermediate Principal Stress ◽  
Shallow Foundations ◽  
Hyperbolic Function ◽  
Stress Effect ◽  
Intermediate Principal Stress Effect

The reasonable determination of ultimate bearing capacity is crucial to an optimal design of shallow foundations. Soils surrounding shallow foundations are commonly located above the water table and are thus in an unsaturated state. The intermediate principal stress has an improving effect on the unsaturated soil strength. In this study, the ultimate bearing capacity formulation of strip foundations in unsaturated soils is presented by using Terzaghi’s theory. The unified shear strength equation of unsaturated soils under a plane strain condition is utilized to capture the intermediate principal stress effect. Furthermore, two profiles of matric suction are considered and a hyperbolic function of the friction angle related to matric suction (φb) is adopted to describe strength nonlinearity. The validity of this study is demonstrated by comparing it with model tests and a theoretical solution reported in the literature. Finally, parameter studies are conducted to investigate the effects of intermediate principal stress, matric suction, and base roughness on the ultimate bearing capacity of strip foundations. Besides, the effect of strength nonlinearity is discussed with two methods representing the angle φb.

Study on the Ultimate Pullout Force of Prestressed Cable Based on Triple Shear Unified Yield Criterion

2012 ◽  
Vol 594-597 ◽  
pp. 840-843
Author(s):  
Xiao Yan Luo ◽  
Wei Ping Liu
Keyword(s):  
Principal Stress ◽  
Yield Criterion ◽  
Intermediate Principal Stress ◽  
Stress Effect ◽  
Pullout Force ◽  
Grouting Pressure ◽  
Effect Parameter ◽  
Ultimate Equilibrium ◽  
Intermediate Principal Stress Effect ◽  
Prestressed Cable

Based on the triple shear unified yield criterion and the ultimate equilibrium principle, the ultimate pullout force of prestressed cable is studied. The ultimate pullout force of prestressed cable is related to the rock type, the shapes of rapture surface, grouting pressures and compressive strength of rock, etc. The results show that the intermediate principal stress effect parameter b have influences on the ultimate pullout force of prestressed cable. With the increase of the intermediate principal stress effect parameter b, the ultimate pullout force of prestressed cable increases too. When the grouting pressure increases, the ultimate pullout force of prestressed cable increases also.

Elastoplastic Analysis of Surrounding Rocks of the Pressure Tunnel

2013 ◽  
Vol 353-356 ◽  
pp. 1644-1647
Author(s):  
Shen Qiong
Keyword(s):  
Plastic Zone ◽  
Mechanical Behavior ◽  
Principal Stress ◽  
Yield Criterion ◽  
Intermediate Principal Stress ◽  
Hydraulic Pressure ◽  
Stress Effect ◽  
Pressure Tunnel ◽  
Effect Parameter ◽  
Intermediate Principal Stress Effect

According to the triple shear unified yield criterion, the mechanical behavior of the pressure tunnel was put forward. The calculation formulas of the radius of plastic zone were deduced with considerations of the effects of the intermediate principal stress. The results show that the intermediate principal stress effect parameter b has influences on the radius of plastic zone. With the increase of the intermediate principal stress effect parameter b, the radius of plastic zone decreases. The radius of plastic zone is increased, because of the increase of the porous hydraulic pressure.

Study of the Ultimate Bearing Capacity of Concrete-filled Steel Tube K-Joints

2019 ◽  
Vol 23 (5) ◽  
pp. 2254-2262 ◽  
Author(s):  
Kaizhong Xie ◽  
Hongwei Wang ◽  
Jinhao Pang ◽  
Jianxi Zhou
Keyword(s):  
Bearing Capacity ◽  
Steel Tube ◽  
Ultimate Bearing Capacity ◽  
Concrete Filled Steel Tube

scholarly journals Axial Compression Performance of Square Thin Walled Concrete-Filled Steel Tube Stub Columns with Reinforcement Stiffener under Constant High-Temperature

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1098 ◽  
Author(s):  
Xuetao Lyu ◽  
Yang Xu ◽  
Qian Xu ◽  
Yang Yu
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Bearing Capacity ◽  
Numerical Models ◽  
Steel Tube ◽  
Ultimate Bearing Capacity ◽  
Displacement Curve ◽  
Concrete Filled Steel Tube ◽  
Finite Element Software ◽  
Thin Walled

This study investigated the axial compressive performance of six thin-walled concrete-filled steel tube (CFST) square column specimens with steel bar stiffeners and two non-stiffened specimens at constant temperatures of 20 °C, 100 °C, 200 °C, 400 °C, 600 °C and 800 °C. The mechanical properties of the specimens at different temperatures were analyzed in terms of the ultimate bearing capacity, failure mode, and load–displacement curve. The experiment results show that at high temperature, even though the mechanical properties of the specimens declined, leading to a decrease of the ultimate bearing capacity, the ductility and deformation capacity of the specimens improved inversely. Based on finite element software ABAQUS, numerical models were developed to calculate both temperature and mechanical fields, the results of which were in good agreement with experimental results. Then, the stress mechanism of eight specimens was analyzed using established numerical models. The analysis results show that with the increase of temperature, the longitudinal stress gradient of the concrete in the specimen column increases while the stress value decreases. The lateral restraint of the stiffeners is capable of restraining the steel outer buckling and enhancing the restraint effect on the concrete.

Nonlinear Finite Element Analysis of Stiffened T-Shaped Thin-Walled Concrete-Filled Steel Tube Composite Columns

2012 ◽  
Vol 193-194 ◽  
pp. 1461-1464
Author(s):  
Bai Shou Li ◽  
Ai Hua Jin
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Bearing Capacity ◽  
Steel Tube ◽  
Ultimate Bearing Capacity ◽  
Element Analysis ◽  
Concrete Filled Steel Tube ◽  
Composite Columns ◽  
Short Columns ◽  
Thin Walled

Based on the characteristics of the special-shaped concrete-filled steel tubes and consideration of material nonlinearity of constitutive relation, stimulation of 6 T-shaped thin-walled ribbed and un-ribbed concrete-filled steel tube short columns is implemented, as well as comparable analysis of stress, strain, displacement and bearing capacity, through the finite element analysis software ANSYS. The result indicates that the rib can effectively improve the ductility, delaying the buckling occurs, which enhances the core concrete confinement effect, so as the stimulated ultimate bearing capacity which is greater than nominal ultimate bearing capacity.

The Changing Rule of Rock Strength under True Triaxial Condition

2014 ◽  
Vol 522-524 ◽  
pp. 1410-1413
Author(s):  
Ze Kang Wen ◽  
Ke Min Wei ◽  
Jia Quan Hu ◽  
You Ling Fang
Keyword(s):  
Principal Stress ◽  
Rock Strength ◽  
Quadratic Function ◽  
Intermediate Principal Stress ◽  
Stress Effect ◽  
True Triaxial Test ◽  
True Triaxial ◽  
Minimum Principal Stress ◽  
Stress Coefficient ◽  
Intermediate Principal Stress Effect

The intermediate principal stress effect of the rock has been demonstrated. By analyzing true triaxial test results of Dunham dolomite and Mizuho trachyte, we studied relationship between minimum principal stress and the rock strength under the same intermediate principal stress coefficient, and the relationship between intermediate principal stress and the rock strength under the same minimum principal stress condition. Research shows that the minimum principal stress has a linear relation with the rock strength, the intermediate principal stress coefficient of a quadratic function relation with the rock strength. And the mathematic expression of the intermediate principal stress effect function was calculated.

Sign in / Sign up

Export Citation Format

Share Document