Study on Influence of Back Angle on Human Body Pressure Distribution

2013 ◽  
Vol 655-657 ◽  
pp. 2088-2092
Author(s):  
Hao Chen ◽  
Hai Yan Song ◽  
Jian Guo Zhang ◽  
Fang Wang

Through the study of the seat size parameter change on the body pressure distribution effect, the powerful references to comfort design of office chair were explored. By using Canadian XSENSOR X3 PRO V6 test system, human body pressure distribution and subjective comfort evaluation in different back angle of 6 objects were tested. The data were processed by statistical analysis software SPSS 16. Then the change of maximum pressure, average pressure, contact area of seat surface and backrest, as well as the vertical pressure distribution curve with the back angle were obtained. Finally the comfort indicators of daily office chair were determined based on body pressure distribution, and the most comfortable back angle of office chair were also solved. Thereby it can provide reference for those who want to design comfortable daily office chair.

2013 ◽  
Vol 477-478 ◽  
pp. 345-348 ◽  
Author(s):  
Tian Qin ◽  
Jian Guo Zhang ◽  
Yu Xing Dai

The objective of the present study was to study the effect of seat angle change on body pressure distribution. The body pressure distribution and body subjective comfort evaluation were recorded in five angles of wheelchair seat surface(0 °, 3 °, 6 °, 9 °and 12 °) by using X-Sensor system. 20 healthy volunteers (10 males and 10 females) were tested to obtain the average pressure of back, the maximum pressure of back, the contact area of back, the average pressure of buttock, the maximum pressure of buttock, the contact area of buttock. The experimental data were analyzed by statistical analysis software SPSS 19.0 and MATLAB. Finally the comfort indicator of wheelchair was determined based on body pressure distribution, and the more comfortable angle of wheelchair seat surface was also obtained, which was 3.17°. The study should provide a strong help for the comfortable wheelchair designing.


2020 ◽  
Vol 39 (1) ◽  
Author(s):  
D. Ohlendorf ◽  
K. Kerth ◽  
W. Osiander ◽  
F. Holzgreve ◽  
L. Fraeulin ◽  
...  

Abstract Background The aim of this study was to collect standard reference values of the weight and the maximum pressure distribution in healthy adults aged 18–65 years and to investigate the influence of constitutional parameters on it. Methods A total of 416 healthy subjects (208 male / 208 female) aged between 18 and 65 years (Ø 38.3 ± 14.1 years) participated in this study, conducted 2015–2019 in Heidelberg. The age-specific evaluation is based on 4 age groups (G1, 18–30 years; G2, 31–40 years; G3, 41–50 years; G4, 51–65 years). A pressure measuring plate FDM-S (Zebris/Isny/Germany) was used to collect body weight distribution and maximum pressure distribution of the right and left foot and left and right forefoot/rearfoot, respectively. Results Body weight distribution of the left (50.07%) and right (50.12%) foot was balanced. There was higher load on the rearfoot (left 54.14%; right 55.09%) than on the forefoot (left 45.49%; right 44.26%). The pressure in the rearfoot was higher than in the forefoot (rearfoot left 9.60 N/cm2, rearfoot right 9.51 N/cm2/forefoot left 8.23 N/cm2, forefoot right 8.59 N/cm2). With increasing age, the load in the left foot shifted from the rearfoot to the forefoot as well as the maximum pressure (p ≤ 0.02 and 0.03; poor effect size). With increasing BMI, the body weight shifted to the left and right rearfoot (p ≤ 0.001, poor effect size). As BMI increased, so did the maximum pressure in all areas (p ≤ 0.001 and 0.03, weak to moderate effect size). There were significant differences in weight and maximum pressure distribution in the forefoot and rearfoot in the different age groups, especially between younger (18–40 years) and older (41–65 years) subjects. Discussion Healthy individuals aged from 18 to 65 years were found to have a balanced weight distribution in an aspect ratio, with a 20% greater load of the rearfoot. Age and BMI were found to be influencing factors of the weight and maximum pressure distribution, especially between younger and elder subjects. The collected standard reference values allow comparisons with other studies and can serve as a guideline in clinical practice and scientific studies.


2018 ◽  
Vol 22 (2) ◽  
pp. 209-222
Author(s):  
Fangfang Zhang ◽  
Trevor John Little

Purpose 3D garment design technology is developing rapidly thereby creating a need for different approaches to developing the patterns. The purpose of this paper is to evaluate the 3D dynamic ease distribution for a 3D garment design. Design/methodology/approach Standard garments were created from Size 2 to Size 14 for ten human subjects. Landmarks location on both human body and the standard garment under dynamic postures are recorded, and he fit and comfort evaluation of the standard garment were collected from the ten human subjects. Finally, these data were used to evaluate the 3D dynamic ease distribution for a 3D garment design. Findings 3D dynamic ease evaluation is challenging and the findings showed that the upper-arm design is a core element of the whole 3D garment design. The upper arm is not only a connecting part for both front and back pieces of the garment, but is also the main active part of the body, so it is the essential element to affect the comfort and fit of the garment under dynamic postures. Originality/value This research provides a novel 3D ease evaluation by analyzing the landmarks location of both human body and standard garment, and fit and comfort evaluation of the standard garment, which are all carried under dynamic postures.


1996 ◽  
Vol 52 (5) ◽  
pp. 253-260 ◽  
Author(s):  
Toyonori Nishimatsu ◽  
Sadamu Sekiguchi ◽  
Eiji Toba

Author(s):  
Se Jin Park ◽  
Min Cheol Whang ◽  
Chang Bum Kim

A new measurement system for body pressure on a bed was developed in this study. The thin film pressure sensor (PSR: Force Sensing Resistor) of an elastomer-type was used to prevent the distortion of contact pressure. The pressure distribution was measured by FSR and displayed on the monitor by color-coded contour patterns. The body pressure distribution and the objective data for four beds with different firmness were observed for possible correlation with the subjective evaluation. Ninety-eight occupants subjectively evaluated five beds for a short-term lying session about 1 hour. The pattern of the pressure distribution was analyzed to correlate approximately with the difference between comfortable and uncomfortable bed. The verification test on the recommended bed was performed by other twenty subjects through one week.


2019 ◽  
Vol 2019 (23) ◽  
pp. 8910-8914 ◽  
Author(s):  
Jiang Yongxiang ◽  
Duan Jingle ◽  
Deng Sanpeng ◽  
Qi Yuming ◽  
Wang Peng ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document