The Effect of Mixing Coal with Biomass in Solid Fuel Briquettes

2013 ◽  
Vol 856 ◽  
pp. 338-342 ◽  
Author(s):  
Chin Yee Sing ◽  
Mohd Shiraz Aris
Keyword(s):  
Mechanical Properties ◽  
Carbon Dioxide ◽  
Power Plants ◽  
Carbon Dioxide Emission ◽  
Palm Kernel ◽  
Value Added ◽  
Calorific Value ◽  
Fuel Properties ◽  
Biomass Fuel ◽  
Palm Kernel Shell

Burning fossil fuel like coal in power plants released carbon dioxide that had been absorbed millions of years ago. Unfortunately, excessive carbon dioxide emission had led to global warming. Malaysia, as one of the major exporters of palm oil, has abundant oil palm mill residues that could be converted into value-added product like biomass fuel briquettes. Fuel briquette with palm kernel shell and palm mesocarp fibre as its main ingredients showed satisfactory fuel characteristics and mechanical properties as a pure biomass fuel briquette. The effects of adding some coal of higher calorific value to the satisfactory biomass fuel briquette were focused in this study. Various coal-biomass fuel blends were used, ranging from 0wt% coal to 50wt% coal. The fuel properties and mechanical properties of pure biomass briquette and briquettes with different amount of coal added were compared experimentally. From the fuel properties tests, it was found that as the coal content in the briquette was increased, the carbon content and calorific value increased. Mechanical property tests on the fuel briquettes showed a mixture of results, with some favored higher portion of coal in the briquette for better handling, transport and storage properties while some favored greater amount of biomass.

Experimental Investigations on the Characteristics of Biomass and Coal-Biomass Fuel Briquettes

2013 ◽  
Vol 683 ◽  
pp. 246-249 ◽  
Author(s):  
Chin Yee Sing ◽  
Mohd Shiraz Aris ◽  
Hussain Hamoud Al-Kayiem
Keyword(s):  
Carbon Dioxide ◽  
Power Plant ◽  
Palm Oil ◽  
Carbon Dioxide Emission ◽  
Palm Kernel ◽  
Value Added ◽  
Biomass Fuel ◽  
Experimental Investigations ◽  
Palm Kernel Shell ◽  
Value Added Products

Combustion of coal, a fossil fuel, in power plant, is a major source of carbon dioxide emission, a greenhouse gas that causes global warming. Malaysia is one of the major exporters of palm oil and has 421 palm oil mills operating in 2010. Some of the residues from these mills like palm kernel shell and palm mesocarp fibre were converted into value-added products. An optimum biomass fuel briquette was obtained with palm kernel shell and palm mesocarp fibre as the major ingredients. Co-firing coal with biomass is a possible approach for power plant to curb the excessive emission of carbon dioxide. In this study, bio-briquette having 50% coal and 50% biomass which consisted of the ingredients of optimum biomass fuel briquette were studied in details. Comparison of the fuel properties, combustion characteristics and carbon dioxide emission between the optimum biomass fuel briquette and bio-briquette was made.

Hydrogen from renewable palm kernel shell via enhanced gasification with low carbon dioxide emission

2013 ◽  
Vol 15 (3) ◽  
pp. 513-523 ◽  
Author(s):  
Tigabwa Yosef Ahmed ◽  
Murni Melati Ahmad ◽  
Hon Loong Lam ◽  
Suzana Yusup
Keyword(s):  
Carbon Dioxide ◽  
Carbon Dioxide Emission ◽  
Palm Kernel ◽  
Low Carbon ◽  
Palm Kernel Shell

scholarly journals The Hungarian Wood-Based Panel Industry and its Impact on the Environment

2016 ◽  
Vol 12 (2) ◽  
pp. 157-172
Author(s):  
Gábor Laborczy ◽  
András Winkler
Keyword(s):  
Carbon Dioxide ◽  
Power Plants ◽  
Negative Impact ◽  
Value Added ◽  
Forest Products ◽  
Air Pollutant ◽  
Raw Material ◽  
Energy Sources ◽  
Forest Products Industry ◽  
Round Wood

Abstract It is well known that worldwide deforestation has a negative impact on the global environment. Forests play an important role in producing oxygen as well as retaining gases that create the greenhouse effect. Forests primarily absorb carbon dioxide, the major air pollutant released by the industrial activities. Energy production is the major source of environmental contamination. In addition to reducing CO2 emissions, another issue this industrial sector must tackle is to decrease the use of fossil fuels by substituting them with renewable, environmentally friendly energy sources. One of the answers to these challenges is the utilization of biomass as energy sources. However, biomass-based fuels include short bolts, split round-wood, pulpwood, bark and by-products of sawmilling, which are the raw materials for the wood-based panel industry as well.Wood utilization of the forest products industry has a major impact on the delayed release of carbon dioxide stored in the wood. All over the world, just as in Hungary, the wood-based panel industry mainly uses low quality wood resources and turns them into value added products. The elongation of the life cycle of low quality wood materials decreases CO2 emissions, thus significantly contributing to environmental protection. Furthermore, it is assumed that raw material demand of the wood-based panel industry could be satisfied by focusing on sustainable forest management and well-planned reforestation. Additionally, special energy-plantations may provide extra wood resources, while waste and other non-usable parts of trees contribute to the effective and economic operation of biomass utilizing power-plants. This paper summarizes the current situation of the Hungarian wood-based panel industry and discusses the effects of the panel manufacturing processes on the environment. Also, it outlines the possible future of this important segment of the forest products industry.

scholarly journals ENERGY-RELATED CARBON DIOXIDE EMISSIONS AND ENVIRONMENTAL EFFICIENCY IN THE EUROPEAN UNION AGRICULTURE: COMPARISON OF DIFFERENT BENCHMARKING TECHNIQUES

2016 ◽  
Vol 38 (3) ◽  
pp. 192-206 ◽  
Author(s):  
Tomas Baležentis ◽  
Daiva Makutėnienė
Keyword(s):  
Carbon Dioxide ◽  
European Union ◽  
Carbon Dioxide Emissions ◽  
Carbon Dioxide Emission ◽  
Value Added ◽  
The European Union ◽  
Undesirable Output ◽  
Energy Technologies ◽  
Desirable Output ◽  
Low Performance

The literature suggests different approaches towards modelling of the environmental impact caused by the production processes. The present paper attempts to establish a framework for multicriteria comparison of agricultural sectors of the European Union Member States and identify the performance gaps in terms of energy-related carbon dioxide emission. The research relies on the two approaches, viz. the by-production approach and the multi-criteria decision making approach. The environmental performance indicators were evaluated in regards to the desirable output (gross value added), inputs, and the undesirable output (carbon dioxide emission). The results indicate that Slovakia, Estonia, Lithuania, and Hungary should attempt to improve their carbon factors by implementing cleaner energy technologies. The combinations of by-production sub-indices suggest that productivity gains are more important for Sweden, Belgium, Poland, and France. Czech Republic, Latvia, and Finland are specific with low performance in terms of both the intended production and the undesirable output. The MCDM approach identified similar trends in performance as suggested by country ranking and correlation analysis.

High Quality Solid Biofuel Briquette Production From Palm Oil Milling Solid Wastes

2009 ◽  
Author(s):  
Abd Halim Shamsuddin ◽  
Mohd Shahir Liew
Keyword(s):  
Moisture Content ◽  
Palm Oil ◽  
Palm Kernel ◽  
Calorific Value ◽  
Solid Wastes ◽  
Biomass Fuels ◽  
High Quality ◽  
Palm Kernel Shell ◽  
Empty Fruit Bunches ◽  
Solid Biofuel

Malaysia has about 4.2 million hectares of oil palm plantation. The palm oil milling industry has over 400 mills throughout the country with total milling capacity of 82 million tonnes fresh fruit bunches, FFB, per year. In 2003, the amount of FFB processed was 67 million tonnes, which generated solid wastes in the forms of empty fruit bunches, EFB (19.43 million tonnes), mesocarp fibres (12.07 million tonnes) and palm kernel shell (4.89 million tonnes). These wastes has moisture content of 60–70% for EFB and mesocarp fibre, and 34–40% for palm kernel shell, and calorific value of 5.0 – 18.0 Mj/kg. A processing technology was developed to process these low quality biomass fuels into high quality solid biofuel briquettes with moisture content in the range 8–12%. Depending on the formulations and the sources of the raw biomass, the final solid biofuel briquettes can have calorific values in the range of 18–25 Mj/kg. The production of the solid biofuel briquettes would be an attractive financial advantage for full exploitation of biomass fuels. Logistic problems due to the disperse nature of the biomass resources would significantly be addressed.

Sign in / Sign up

Export Citation Format

Share Document