Study of Fatigue Test Loading Spectrum for Wind Turbine Blade

2014 ◽  
Vol 889-890 ◽  
pp. 221-224
Author(s):  
Gao Hua Liao ◽  
Jian Zhong Wu ◽  
Yong Jun Yu
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Fatigue Test ◽  
Turbine Blade ◽  
Time History ◽  
Wind Load ◽  
Wind Turbine Blade ◽  
Fatigue Life Analysis ◽  
Test Loading ◽  
Loading Spectrum

According to the principle of equivalent, the approach to draw up the fatigue test loading spectrum of wind turbine blade is presented. Analysis of wind load characteristics, based on ARMA (Autoregressive Moving Average Model) for the simulation of wind speed, wind load simulation example is given. Using Bladed software, the wind speed-time history is converted to a moment-time history that is the equivalent of blade root.Using data compression technology and the rain flow counting algorithm, load represented by a 2D matrix examples is given.The one-dimensional symmetry loading spectrum draw up, the complexity can be simplified, and provides the necessary foundation for fatigue life analysis.

Control Framework and Integrative Design Method for an Adaptive Wind Turbine Blade

2020 ◽  
Vol 142 (10) ◽  
Author(s):  
Hamid Khakpour Nejadkhaki ◽  
John F. Hall
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Design Method ◽  
Design Procedure ◽  
Wind Turbine Blade ◽  
Control Technique ◽  
Angle Distribution ◽  
Control Framework ◽  
Integrative Design

Abstract A control framework and integrative design method for an adaptive wind turbine blade is presented. The blade is adapted by actively transforming the twist angle distribution (TAD) along the blade. This can alleviate fatigue loads and improve wind capture. In this paper, we focus on wind capture. The proposed design concept consists of a rigid spar that is surrounded by a series of flexible blade sections. Each section has two zones of stiffness. The sections are actuated at each end to deform the TAD. A quasi-static control technique is proposed for the TAD. The controller sets the position of the blade actuators that shape the TAD during steady-state operation. A design procedure is used to define the required TAD as a function of the wind speed. This is based on an optimization procedure that minimizes the deviation between the actual TAD and that found in the aerodynamic design. The design inputs for this optimization problem include the stiffness for each zone of the section, and the actuator locations along the blade. Given the optimal TAD at each wind speed, the free position of the blade is established using a dynamic programming technique. The position is selected based on minimal actuation energy according to wind conditions at any installation site. The proposed framework is demonstrated using a National Renewable Energy Laboratory (NREL) certified wind turbine model with recorded wind data. An increase in efficiency of 3.8% with only a deviation of 0.34% from the aerodynamic TAD is observed.

scholarly journals Modal Analysis of Vertical Wind Turbine Blade

2018 ◽  
Vol 217 ◽  
pp. 01003 ◽  
Author(s):  
Lee Zhou Yi ◽  
Choe-Yung Teoh
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Modal Analysis ◽  
Turbine Blade ◽  
Wind Turbine Blade ◽  
Flow Induced Vibration ◽  
Low Wind Speed ◽  
Teak Wood ◽  
Blade Failure ◽  
Wind Induced Vibration

Wind turbines cannot simply be installed in Malaysia due to low wind speed condition. the project has analyzed the existing wind turbine blade (Aeolos-V 1k) design based on modal properties using computational approach (ANSYS Workbench) and redesign it. the modal analysis is simulated to observe natural frequency and corresponding mode shaped of the system under free vibration. the flow induced vibration can cause blade failure due to resonance or fatigue. Fluid Structural Interaction (FSI) ANSYS is used to the determined the interaction between the wind flow and the blade. Harmonic Response ANSYS is used to analyze the frequency response of the blade under wind induced vibration. After modification, the first mode has increased from 91.42 Hz to 102.12, since it is more than 50.92 Hz (Turbine maximum operating frequency), resonance would not occur during operating condition. the Aeolos-V’s blade has been modified by using. teak wood material and. redesign the blade for weight. reduction and aim for lower blade cost. the weight of modified blade has reduced 72.8 % after using teak wood and the efficiency of the wind turbine also increased. Modified design has been tested under Malaysia maximum wind speed of 9.44 m/s, the yield stress of teak wood (10.3 MPa) is higher than the maximum stress (4.2 MPa) obtained under force vibration which gives safety factor of 2.4. Hence, modified blade is reliable, efficient and more economic for Malaysia.

scholarly journals Joint excitation synchronization characteristics of fatigue test for offshore wind turbine blade

AIP Advances ◽  
2018 ◽  
Vol 8 (2) ◽  
pp. 025112 ◽  
Author(s):  
Lei-an Zhang ◽  
Xiang-yong Yu ◽  
Xiu-ting Wei ◽  
Wei-sheng Liu
Keyword(s):  
Wind Turbine ◽  
Fatigue Test ◽  
Turbine Blade ◽  
Wind Turbine Blade ◽  
Offshore Wind ◽  
Offshore Wind Turbine

scholarly journals The Study of Wind Turbine Blade Fatigue Test

2021 ◽  
Vol 293 ◽  
pp. 02024
Author(s):  
Jiaqi Zheng ◽  
Qiming Yu ◽  
Botao Zhu ◽  
Changqing Wu ◽  
Yiling Huang ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Fatigue Test ◽  
Turbine Blade ◽  
Excitation Amplitude ◽  
Wind Turbine Blade ◽  
Excitation Mode ◽  
Practical Operation ◽  
Important Means ◽  
Feasible Solutions ◽  
The Relationship

The fatigue test of wind turbine blade is an important means to verify the fatigue life of wind turbine blade. This paper analyses the problems existing in the fatigue test of wind turbine blade, focuses on the excitation mode, the relationship between excitation amplitude and vibration frequency and the vibration principle, and puts forward feasible solutions in practical operation.

Health assessment and management of wind turbine blade based on the fatigue test data

2017 ◽  
Vol 75 ◽  
pp. 205-214 ◽  
Author(s):  
Xuezong Bai ◽  
Zongwen An ◽  
Yunfeng Hou ◽  
Qiang Ma
Keyword(s):  
Wind Turbine ◽  
Fatigue Test ◽  
Turbine Blade ◽  
Test Data ◽  
Health Assessment ◽  
Wind Turbine Blade

Fatigue Analysis of an Innovative Extensible Wind Turbine Blade

2016 ◽  
Author(s):  
Jiale Li ◽  
Xiong (Bill) Yu
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Fatigue Damage ◽  
Wind Turbine Blade ◽  
Time Interval ◽  
Data Set ◽  
Low Wind Speed ◽  
Wind Turbine Tower ◽  
Utility Scale

This paper describes the feasibility analyses of an innovative, extensible ‘smart’ blade technology aims to significantly improve the wind turbine energy production. This innovative ‘smart’ blade will be extended at low wind speed to harvest more wind energy. It will be retracted to its original shape above rated wind speed, to protect the blade from possible damages under high wind speed. The extended blade, however, will inevitably increase the fatigue damage of the wind turbine blade of which fatigue demand, which often controls the design requirement of wind turbine blade. A rain-flow counting method is used for calculating stress range cycles during turbine blade operation. The analyzes model in the research is built based on a 100 kW utility-scale wind turbine installed on the campus of Case Western Reserve University with a data acquisition system installed on the wind turbine tower to monitor the operation data continuously over the years. In this analyses, the data set consists of four years’ wind speed data at 10-minutes time interval and blade rotational speed from March 2014 to February 2015 have been used. The results show that the fatigue damage of this extensible blade increased is acceptable considering its increased power output.

Sign in / Sign up

Export Citation Format

Share Document