Multi-Body Dynamics Analysis of V-Type Diesel Engine Crankshaft

2014 ◽  
Vol 988 ◽  
pp. 617-620
Author(s):  
Ran Ran Wang ◽  
Yan Ming Xu ◽  
Xian Bin Teng
Keyword(s):  
Finite Element ◽  
Diesel Engine ◽  
Dynamic Models ◽  
Simulation Analysis ◽  
Simulation Method ◽  
Dynamics Simulation ◽  
Finite Element Software ◽  
Body Dynamics ◽  
Multi Body ◽  
Engine Crankshaft

Based on the V-type diesel engine crankshaft system, the paper combined the finite element method (fem) and multi-body dynamics method together, made a virtual simulation analysis. First, by 3d software and finite element software to establish the multi-body dynamic models of the crankshaft, bearing and piston, then simulated the actual engine working condition, and got the data such as crankshaft acceleration, velocity and displacement by the multi-body dynamics simulation analysis. By calculation, the paper found that by using the combination of finite element and multi-body simulation method, can we effectively simulate the diesel engine crankshaft dynamics characteristics.

Strength Analysis of Diesel Engine Crankshaft Based on Flexible Multi-Body Dynamics

2014 ◽  
Vol 654 ◽  
pp. 65-68
Author(s):  
Ling Jin Wang ◽  
Dan Li ◽  
Xiu Xia Lu ◽  
Pei Fan Li ◽  
Ying Jun Jia
Keyword(s):  
Diesel Engine ◽  
High Cycle Fatigue ◽  
Dynamics Simulation ◽  
Strength Analysis ◽  
Cycle Fatigue ◽  
Safety Factors ◽  
Body Dynamics ◽  
Dynamics Calculation ◽  
Multi Body ◽  
Engine Crankshaft

Crankshaft is one of the key parts of the diesel engine. Several causes would be lead to the failure of the crankshaft. A novel strength analysis method is used for crankshaft high cycle fatigue simulation of the diesel engine based on flexible multi-body dynamics in this paper. In order to investigate the fatigue strength of other parts of the diesel engine at the same time, a complete coupled dynamic model of diesel engine crankshaft and block is built and coupled dynamics simulation is carried out. Then dynamics calculation results of each part is extracted for high cycle fatigue analysis and the reliability research of the crankshaft, The simulation results show that, the minimum safety factors of the crankshaft is 1.301, it meet the strength requirements, the safety factors of the block and the cap could be calculated at the same time. These suggest that this method can guide the design of the diesel engine crankshaft and has gained significant importance in practical study.

Simulation and Study on Ride Comfort of Articulated Dump Truck Based on Rigid-Flex Coupling

2014 ◽  
Vol 494-495 ◽  
pp. 55-58
Author(s):  
Jie Guo
Keyword(s):  
Finite Element ◽  
Ride Comfort ◽  
Dynamic Theory ◽  
Dynamics Simulation ◽  
Dump Truck ◽  
Body System ◽  
Finite Element Software ◽  
Body Dynamics ◽  
Set Up ◽  
Multi Body

For the poor ride comfort performance of the articulated dump truck, the dynamic model of ADT was built and its dynamic characteristics were also studied through finite element and multi-body system dynamic theory. According to the modal neutral file generated by finite element software with the flexible processing, the flexible coupling virtual prototyping model was set up for the multi-body dynamics simulation in ADAMS to obtain and analyze the data about the ADT ride comfort. This paper provided references for the design, redesign and optimization of the ADT.

Vibrating Simulation of Diesel Engine Based on Multi-Body Dynamics

2011 ◽  
Vol 97-98 ◽  
pp. 706-711 ◽  
Author(s):  
Kang Shao ◽  
Chang Wen Liu ◽  
Fong Rong Bi ◽  
Xian Feng Du ◽  
Xia Wang ◽  
...  
Keyword(s):  
Diesel Engine ◽  
System Analysis ◽  
Simulation Analysis ◽  
Three Dimensional ◽  
Dynamics Simulation ◽  
Main Bearing ◽  
Engine Vibration ◽  
Body Dynamics ◽  
Flexible Body Dynamics ◽  
Multi Body

Taking example of a four-cylinder inline diesel engine that used in vehicle, this paper makes an assembly engine of three-dimensional that based on virtual prototype technology. While using the flexible-body dynamics simulation, the main bearing load that effect engine’s vibration will be gained. And the key point vibration response will be gained when the support part constrained. The experimental results coincide with the simulation results shows the correction of the simulation analysis. The initial stage of the vibration can be predicted by using the method of multi-body system analysis, and this guide the designer to identify the engine vibration.

Multi-Body Dynamics Simulation and Finite Element Analysis of the Car’s Sub-Frame

2012 ◽  
Vol 253-255 ◽  
pp. 2107-2112
Author(s):  
Jian Min Li ◽  
Chuan Yang Sun ◽  
Zhang Cheng Yang ◽  
Zu Xi Yi
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Field ◽  
Simulation Method ◽  
Dynamics Simulation ◽  
Element Analysis ◽  
Engine Load ◽  
The Finite Element Analysis ◽  
Body Dynamics ◽  
Multi Body

For the problem that car sub-frame constraint connection complex and effective load more difficult to determine, using finite element and multi-body dynamics ADAMS co-simulation method, Analyzed on a Volkswagen vehicle sub-frame, obtained the accurate load on the sub-frame which are used by engine suspension. The finite element analysis results show that engine load is the greatest impact on the sub-frame stress field, which can be reduced by increasing the area of engine and the sub-frame contacting, thereby prolong the life of sub-frame.

The torsional vibration simulation of the diesel engine crankshaft system based on multi-body dynamic model

2021 ◽  
pp. 146441932110202
Author(s):  
Mengsheng Wang ◽  
Nengqi Xiao ◽  
Minghui Fan
Keyword(s):  
Diesel Engine ◽  
Torsional Vibration ◽  
Silicone Oil ◽  
Engineering Application ◽  
Simulation Software ◽  
Dynamics Simulation ◽  
Three Dimensional Model ◽  
Body Dynamics ◽  
Multi Body ◽  
Engine Crankshaft

In order to analyze the torsional vibration of the crankshaft system, a three-dimensional model of the crankshaft system is established, consisted of the piston, connected rod, crank shaft, flywheel and silicone oil damper. Use by multi-body dynamics simulation software ADAMS, created the multi-body dynamics model of the multiple degrees of freedom consisting of rigid hybrid engine system, to do the torsional vibration response simulation, analysis of the torsional vibration on the crankshaft. Through the torsional vibration test of the diesel engine crankshaft system, the accuracy of the simulation calculation results have been verified. This simulation result has higher accuracy, and this calculation method has certain engineering application value.

scholarly journals Multi-Body Dynamics Analysis of V-Type Diesel Engine Crankshaft

2014 ◽  
Vol 8 (1) ◽  
pp. 744-749
Author(s):  
Yanming Xu ◽  
Xianbin Teng ◽  
Zhimin Yu ◽  
Tao Ge
Keyword(s):  
Diesel Engine ◽  
Dynamics Analysis ◽  
Body Dynamics ◽  
Multi Body ◽  
Engine Crankshaft

Study on Wheel-Rail Coupled Vibration of Metro with Co-Simulation of Finite Element Analysis and Multi-Body Dynamics Simulation

2015 ◽  
Vol 752-753 ◽  
pp. 636-641
Author(s):  
Wen Jing Sun ◽  
Dao Gong ◽  
Jin Song Zhou
Keyword(s):  
Finite Element ◽  
Dynamics Simulation ◽  
Track Structure ◽  
Coupled Vibration ◽  
Dynamics Model ◽  
Element Analysis ◽  
Modal Reduction ◽  
Body Dynamics ◽  
Flexible Track ◽  
Multi Body

Based on the multi-body dynamics theory and modal-reduction analysis, finite element method and multi-body dynamics were combined to establish the flexible track model. The rigid-flexible coupled dynamics model can reflect the features of coupled vibration accurately. When the flexibility of the rail, damping and stiffness of support layers under the rail are taken into consideration, the whole track structure acted as a buffer while wheel and rail is interacting with each other. Compared with rigid track model, the wheel-rail vibration is less in the flexible track model. The proposed method in this paper is simple and effective, which makes the calculation of vehicle-track dynamic response more convenient and quick.

Modal Based Geometric Stiffening Formulation for Dynamics Simulation of Multibody Systems

2011 ◽  
Author(s):  
Fengxia Wang
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Element Model ◽  
Dynamics Simulation ◽  
Reduced Model ◽  
Reduced Models ◽  
Modal Reduction ◽  
Body Dynamics ◽  
Geometric Stiffening ◽  
Multi Body

This work concerns the implementation of nonlinear modal reduction to flexible multi-body dynamics. Linear elastic theory will lead to instability issues with rotating beamlike structures, due to the neglecting of the membrane-bending coupling on the beam cross-section. During the past decade, considerable efforts have been focused on the derivation of geometric nonlinear formulation based on nodal coordinates. In this work, in order to improve the convergence characteristic and also to reduce the computation time in flexible multi-body dynamics, which is extremely important for complicated large systems, a standard modal reduction procedure based on matrix operation is developed with essential geometric stiffening nonlinearities retained in the equation of motion. The example used in this work is a rotating Euler-Bernoulli beam, two nonlinear reduced models were established based on modal coordinates, the first reduced model created from theoretical bending and axial mode shapes by Galerkin method; the second reduced model is derived by the standard matrix operator from a full finite element model. Transient simulation results of lower degrees of freedom from above two reduced models are compared with those obtained from full nonlinear finite element model.

Sign in / Sign up

Export Citation Format

Share Document