Numerical Simulation of Steel Flow and Behaviour of Non-Metallic Inclusions in the Six-Strand Tundish with Stopper Rod System

2010 ◽  
Vol 638-642 ◽  
pp. 3176-3181 ◽  
Author(s):  
Adam Cwudziński ◽  
Jan Jowsa
Keyword(s):  
Numerical Simulation ◽  
Fluid Dynamic ◽  
Casting Process ◽  
Test Facility ◽  
Steel Mill ◽  
Flow Control Devices ◽  
Metallic Inclusions ◽  
Rod System ◽  
Residence Time Distributions ◽  
Steel Flow

The numerical modelling technique is successfully used for simulation of steel flow and behaviour of non-metallic inclusions in the tundish. The CFD (Computational Fluid Dynamic) method allows information on steel motion, flow, flow turbulence and steel temperature distribution in the tundish to be obtained. In the continuous steel casting process, where the tundish performs the function of a device batching steel to the mould, the monitoring of steel flow is very essential because steel flow has influence on the behaviour of non-metallic inclusions. The paper presents the results of computing simulation steel flow and flotation of non-metallic inclusions in the six-strand tundish with stopper rod system. The subject of simulation was a six-strand tundish unprovided with flow control devices. The tundish is used in the polish steel mill to process of continuous casting billets. The Fluent program was used for solved mathematical model of casting process. The numerical simulation of steel flow was performed for whole test facility without the “symmetry” boundary condition. As a results of numerical simulation maps of directions flow and temperature of steel, Residence Time Distributions curve type of (F) and (E) and distributions of non-metallic inclusions between slag phase and particular tundish outlets has been obtained.

Mathematical Modeling of Behaviour a Liquid Steel Flow and a Non-Metallic Inclusions in the One Strand Wedge Type Tundish with a Subflux Turbulence Controller and a Low Dam

2012 ◽  
Vol 706-709 ◽  
pp. 1379-1384 ◽  
Author(s):  
Adam Cwudziński ◽  
Jan Jowsa
Keyword(s):  
Continuous Casting ◽  
Liquid Steel ◽  
Volume Fraction ◽  
Casting Process ◽  
Balance Model ◽  
Phase Volume Fraction ◽  
Metallic Inclusions ◽  
Rod System ◽  
The One ◽  
Steel Flow

The numerical modelling technique is successfully used for simulation of liquid metal movement and behaviour of non-metallic inclusions in the continuous casting devices. The CFD (Computational Fluid Dynamic) method allows information on physical, chemical and hydrodynamic phenomenon in the metallurgical processes to be obtained. In the continuous steel casting process, where the tundish performs the function of a device batching steel to the mould, the monitoring especially of non-metallic inclusions is very essential because a quantity of non-metallic inclusions in the liquid steel limit the quality of final steel product. The paper presents the results of computing simulation of behaviour a liquid steel flow and non-metallic inclusions in the one-strand tundish with stopper rod system. The subject of simulation was a one-strand tundish of a nominal capacity of 30 tons. The tundish is used in the polish steel mill to process of continuous casting slabs. In the paper authors analysed two tundish i.e. tundish with a low dam and tundish with a subflux turbulence controller and a low dam. The Ansys-Fluent® program was used for solved mathematical model of casting process. The computer simulations were performed for unsteady and nonisothermal conditions. The population balance model was used to description of non-metallic inclusions growth process. As a result of computations, fields of liquid steel flow, fields of secondary phase volume fraction, fields of volume fraction for particular bins and non-metallic inclusions growth curve were obtained.

scholarly journals New Insight on Liquid Steel Microalloying by Pulse-Step Method in Two-Strand Slab Tundish by Numerical Simulations

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 448
Author(s):  
Adam Cwudziński
Keyword(s):  
Liquid Steel ◽  
Mixing Time ◽  
Casting Process ◽  
Step Method ◽  
Flow Control Devices ◽  
Alloy Addition ◽  
Interesting Approach ◽  
Control Devices ◽  
Steel Flow ◽  
Alloy Concentration

Developing a technology for introducing alloy addition to liquid steel during the course of continuous casting process seems to be an interesting approach to enhancing the steelmaking process, especially as the effective introduction of micro-additives or non-metallic inclusion modifiers to the liquid steel is the key to the production of the highest-quality steel. This paper presents the results of investigation describing the process of liquid steel chemical homogenisation in the two-strand slab tundish. The alloy was fed to liquid steel by pulse-step method. Five tundish equipment variants with different flow control devices and alloy addition feeding positions were considered. The paper includes fields of liquid steel flow, alloy concentration vs. time curves, dimensionless mixing time, minimum time values and alloy concentration deviations at tundish outlets. The results pointed much more effectively with liquid steel mixing nickel than aluminium. For aluminium obtaining a 95% chemical homogenisation level requires three-fold more time. Moreover, it is definitely beneficial for chemical homogenisation to initiate the alloying process simultaneously in two sites. This procedure generates, among others, the least alloy deviation of concentration at tundish outlets.

scholarly journals Numerical Modelling of Fluid Flow and Thermal Phenomena in the Tundish of CSC Machine

2014 ◽  
Vol 14 (1) ◽  
pp. 103-106 ◽  
Author(s):  
L. Sowa
Keyword(s):  
Numerical Simulation ◽  
Flow Control ◽  
Liquid Steel ◽  
Metal Flow ◽  
Temperature Fields ◽  
Cast Slab ◽  
Flow Control Devices ◽  
Steel Cast ◽  
Control Devices ◽  
Steel Flow

Abstract The mathematical and numerical simulation model of the liquid steel flow in a tundish is presented in this paper. The problem was treated as a complex and solved by the finite element method. The single-strand slab tundish is used to continuous casting slabs. The internal work space of the tundish was modified by the following flow control devices. The first device was a striker pad situated in the pouring tundish zone. The second device was a baffle with three holes and the third device was a baffle without hole. The main purpose of using these devices was to cause a quiet liquid mixing as well as give directional metal flow upwards which facilitated inclusion floatation. The interaction of flow control devices on hydrodynamic conditions was received from numerical simulation. As a result of the computations carried out, the liquid steel flow and steel temperature fields were obtained. The influence of the tundish modification on velocity fields in the liquid phase of steel was estimated, because these have an essential influence on high quality of a continuous steel cast slab.

Numerical Simulation of Behaviour a Non-Metallic Inclusions in an One-Strand Slab Tundish with Steel Flow Controll Devices

2011 ◽  
Vol 56 (3) ◽  
pp. 611-618 ◽  
Author(s):  
A. Cwudziński
Keyword(s):  
Numerical Simulation ◽  
Liquid Steel ◽  
Flow Reactor ◽  
Control Device ◽  
Discrete Phase Model ◽  
Internal Working ◽  
Working Space ◽  
Metallic Inclusions ◽  
Discrete Phase ◽  
Steel Flow

Numerical Simulation of Behaviour a Non-Metallic Inclusions in an One-Strand Slab Tundish with Steel Flow Controll DevicesAn effective refining of liquid steel can be carried out either in a tundish or in the mould of a CSC machine. Being a flow reactor, the tundish performs the function of a link between the steelmaking ladle and the mould. Owing to this fact, the liquid steel resides in the tundish for a specific time, which enables the tundish to be used for refining purposes. For modification oftundish internal working space, two types of flow control device (FCD), namely a ceramic gas-permeable barrier and a subflux turbulence controller (STC), were proposed. For simulation of movement of gas phase and non-metallic inclusions, a discrete phase model was used. The obtained results unambiguously indicate which of the proposed tundish equipment configurations will be more advantageous for intensifying the process of liquid steel refining from NMIs.

Numerical Simulation of Flow Field in the Tundish with Two Outlets

2015 ◽  
Vol 723 ◽  
pp. 140-144
Author(s):  
Tian Fei Ma ◽  
Hong Xia Li ◽  
Xin Fu Wang ◽  
Guo Qi Liu
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Liquid Surface ◽  
Short Circuit ◽  
Steel Mill ◽  
Orifice Area ◽  
Small Flow ◽  
Continuous Casting Tundish ◽  
Simulation Results ◽  
Steel Flow

According to the operating parameters of continuous casting tundish in a steel mill, the flow patterns of liquid steel in tundish were studied by the method of numerical simulation. Changing the flow orifice area of slag wall, to simulate and calculate the influence of slag wall on the flow field in tundish. Through calculating the steel flow vector, to analyze the uniformity of steel flow in tundish, by calculating the inclusions distribution to analyze the effect of blocking slag wall holding inclusions. The simulation results show that: the slag wall can obviously deduce the short circuit flow of steel liquid in tundish bottom. With the flow orifice area is reduced, and the turbulence brisk between two slag walls, and liquid surface is easy to roll; the ability of slag wall holding inclusions enhances, but too small flow orifice area will prompt inclusions passing the slag wall.

Numerical Simulation of the Molten Steel Flow in the Tundish of CSC Machine / Symulacja Numeryczna Przepływu Ciekłej Stali W Kadzi Pośredniej Urządzenia COS

2012 ◽  
Vol 57 (4) ◽  
pp. 1163-1169 ◽  
Author(s):  
L. Sowa ◽  
A. Bokota
Keyword(s):  
Numerical Simulation ◽  
Flow Control ◽  
Liquid Steel ◽  
Metal Flow ◽  
Velocity Fields ◽  
Temperature Fields ◽  
Cast Slab ◽  
Flow Control Devices ◽  
Control Devices ◽  
Steel Flow

The mathematical and numerical simulation model of the liquid steel flow in a tundish is presented in this paper. The problem was treated as a complex one. The velocity fields are obtained by solving the momentum equations and the continuity equation, whereas the thermal fields are calculated by solving the conduction equation with the convection term. One takes into consideration in the mathematical model the changes of thermophysical parameters depending on the temperature. The problem was solved by the finite element method. The one-strand slab tundish is used to casting slabs. The internal work space of the tundish was modified by flow control devices. The first device was a striker pad situated in the pouring tundish zone. The second device was a baffle with three holes. The main purpose of using these was to put barriers in the steel flow path as well as give directional metal flow upwards which facilitated inclusion floatation. The visualization of interaction of flow control devices on hydrodynamic conditions was received from numerical simulations. As a result of the computations carried out, the liquid steel flow and steel temperature fields were obtained. The influences of the tundish modifications on the velocity fields in liquid phase of the steel were estimated, because these have essential an influence on high-quality of a continuous steel cast slab.

Sign in / Sign up

Export Citation Format

Share Document