Effects of High Magnetic Field Annealing on the Nucleation Sites for Recrystallized Nuclei with {111} Orientation in Cold-Rolled IF Steel Sheet

2010 ◽  
Vol 638-642 ◽  
pp. 824-828
Author(s):  
Yan Wu ◽  
Chang Shu He ◽  
Yu Dong Zhang ◽  
Xiang Zhao ◽  
Liang Zuo ◽  
...  
Keyword(s):  
Magnetic Field ◽  
High Magnetic Field ◽  
Steel Sheet ◽  
Annealed Specimen ◽  
If Steel ◽  
Nucleation Sites ◽  
Field Annealing ◽  
Cold Rolled ◽  
The Magnetic Field ◽  
If Steel Sheet

The effect of high magnetic field annealing on the nucleation sites for recrystallized nuclei with {111}<112> orientation in the initial stage of recrystallization in as-annealed interstitial-free (IF) steel sheet were investigated by the SEM-EBSD analysis. Specimens of cold rolled IF steel sheet were annealed at 650°C for 0min and 10min respectively with a 12-tesla magnetic field to obtain a partially recrystallized microstructure. During the magnetic field annealing, they were respectively placed at the center of the applied field with their rolling planes parallel to the magnetic field direction (MD), and with their rolling direction (RD) parallel and normal to the MD, respectively. It was found that different to the non-field annealed specimen, in the field annealed specimens, the {111}<112> oriented recrystallized nulei favored to nucleate in the {111}<112> deformed matrix and not in the {111}<110> deformed matrix. This phenomenon may be attributed to the magnetic ordered state induced by the magnetic field, which might suppress the formation of high-energy grain boundaries between the newly formed nuclei and the deformed matrix.

Characteristics of Recrystallization Texture Evolution in High Magnetic Field for Interstitial Free (IF) Steel Sheet

2005 ◽  
Vol 495-497 ◽  
pp. 465-470 ◽  
Author(s):  
Chang Shu He ◽  
Yu Dong Zhang ◽  
X. Zhao ◽  
Liang Zuo ◽  
Claude Esling
Keyword(s):  
Magnetic Field ◽  
High Magnetic Field ◽  
Recrystallization Texture ◽  
Steel Sheet ◽  
Texture Evolution ◽  
Interstitial Free ◽  
If Steel ◽  
Direction Parallel ◽  
The Magnetic Field ◽  
If Steel Sheet

High magnetic field is applied with the field direction parallel to the rolling direction during annealing of a cold rolled IF steel sheet. Results of X-ray ODF analysis show that, magnetic field annealing retards the normal recrystallization texture evolution for the IF steel sheet. It is worth noting that an abnormal increase of orientation intensity at {100}<110> is found after magnetic annealing for 25min at 650°C. When the magnetic field strength is increased from 10 Tesla to 14 Tesla, the a-fiber is further strengthened, especially the {100}<110> component. Combined with EBSD analysis results, it is considered that the magnetic field does not change the mechanism of recrystallization texture evolution for the IF steel sheet in the present case.

Microstructure and Texture Evolution in Cold Rolled Interstitial Free (IF) Steel Sheet during Annealing under AC Magnetic Field

2010 ◽  
Vol 638-642 ◽  
pp. 2781-2786
Author(s):  
Chang Shu He ◽  
Sadahiro Tsurekawa ◽  
Hiroyuki Kokawa ◽  
Xiang Zhao ◽  
Liang Zuo
Keyword(s):  
Magnetic Field ◽  
Steel Sheet ◽  
Texture Evolution ◽  
Rolling Direction ◽  
Recrystallization Annealing ◽  
Interstitial Free ◽  
If Steel ◽  
Ac Magnetic Field ◽  
Cold Rolled ◽  
If Steel Sheet

An AC magnetic field (0.5Tesla) is applied with the field direction perpendicular to the rolling direction during annealing of a 76% cold-rolled IF steel sheet. Microstructure and texture evolution in the as-annealed specimens were determined using SEM based OIM technique. It is found that the recrystallization is noticeably retarded by AC magnetic field annealing. At the early stage of recrystallization (annealing at 650°C for 30min), the development of (111) <123> orientations was favored by the AC magnetic field. With progress of recrystallization (annealing at 700°C and 750°C for 30min), the applied AC magnetic field suppressed the development of γ-fiber recrystallization textures to some extent.

Effects of high magnetic field annealing on the initial recrystallized texture in pure copper

2015 ◽  
Vol 29 (10n11) ◽  
pp. 1540020 ◽  
Author(s):  
Tong He ◽  
Yan Wang ◽  
Wei Sun ◽  
Xiang Zhao
Keyword(s):  
Magnetic Field ◽  
Grain Boundaries ◽  
High Magnetic Field ◽  
Pure Copper ◽  
Cube Texture ◽  
Magnetic Annealing ◽  
Final Annealing ◽  
Field Annealing ◽  
Cold Rolled ◽  
The Magnetic Field

The cold-rolled pure copper sheets were annealed with and without a high magnetic field of 12 T. The results showed that the magnetic annealing could promote the formation of the initial recrystallized cube texture. The magnetic annealing did not dramatically change the final annealing textures, but the intensity of the recrystallized cube texture is obviously different. The differences of the recrystallized cube orientation intensity between the specimens with and without the field annealing may be attributed to the effects of the magnetic field on the mobility of grain boundaries.

Effect of Magnetic Field Direction on Texture Evolution in Cold-Rolled IF Steel Sheet at the Initial Stage of Recrystallization

2011 ◽  
Vol 194-196 ◽  
pp. 75-79
Author(s):  
Yan Wu ◽  
Xiang Zhao ◽  
Chang Shu He ◽  
Liang Zuo
Keyword(s):  
Magnetic Field ◽  
Texture Component ◽  
Field Direction ◽  
Magnetic Field Direction ◽  
If Steel ◽  
Initial Stage ◽  
Field Annealing ◽  
Specimen Orientation ◽  
Cold Rolled ◽  
The Magnetic Field

Sheets of cold rolled (76%) IF steel were annealed at 650°C for 30min under a 12-tesla magnetic field. During the magnetic field annealing, they were placed at the center of the applied field respectively, being oriented differently with respect to the magnetic field direction. The results show that the high magnetic field annealing prevents the evolution from deformed {111}<110> texture component to recrystallized {111}<112> texture component at the initial stage of recrystallization. For the field annealed specimens, altering the specimen orientation to the magnetic field direction during annealing does not change the final annealing textures. The intensity of main {111} texture components presents a similar periodic variation with respect to the specimen orientation to the magnetic field.

Sign in / Sign up

Export Citation Format

Share Document