Potential of Hot Rolled Dualphase Steel from Compact Strip Production CSP® in Automotive Applications
Industrial thin slab casting and direct rolling processing started in 1989 with the world’s first CSP® plant at Crawfordsville (USA). Since this time CSP® and competing thin slab casting and direct rolling concepts have been developed to a standard process for hot strip production [1]. Typical features of the CSP® process are the homogeneous structural and mechanical properties all along the strip. Direct hot rolling of thin slabs may be followed by a well defined cooling pattern to produce hot strip from high strength multiphase steel, like dualphase (DP) grades, on the runout table. These steel grades are characterized by a favorable combination of strength and ductility based on hard martensitic particles embedded in a ductile ferritic matrix. This paper highlights the mechanical properties of hot rolled DP steel from CSP® production. To this purpose, multiple tests and modeling have been applied to determine e.g. r-values, forming limit curves and yield locus. In addition, forming simulation as well as laboratory and industrial deep drawing tests have been performed.