Continuous Casting of a Multi-Crystalline Silicon Billet

2015 ◽  
Vol 833 ◽  
pp. 112-116 ◽  
Author(s):  
Mu Yi Li ◽  
Yan Hu ◽  
Hai Hao
Keyword(s):  
Heat Transfer ◽  
Continuous Casting ◽  
Production Efficiency ◽  
Crystalline Silicon ◽  
Three Dimensional ◽  
Element Model ◽  
Dimensional Finite Element ◽  
Lower Heat ◽  
Experimental Works ◽  
Three Dimensional Finite Element

In order to improve the production efficiency, numerical simulation and experiments of continuous casting of a multi-crystalline silicon (mc-silicon) billet were carried out. Modeling works were done firstly to optimize casting recipe and predict billet cooling behaviors, a three-dimensional finite element model for the simulation of thermal field and fluid flow was built. The continuous casting of cylindrical silicon billet was studied considering different casting parameters such as withdrawal speed and heat transfer ability of mold. The simulation results indicate that lower casting speed and lower heat transfer coefficient of mold are beneficial to acquire better morphology. Experimental works were practiced lying on the modeling results, using the self-designed mc-silicon continuous casting apparatus, mc-silicon billet with a diameter of 100 mm was obtained.

3D Fem Study of Fluid Flow in the Mould for Billet Continuous Casting

2009 ◽  
Vol 79-82 ◽  
pp. 1269-1272
Author(s):  
Wei Chen ◽  
Bao Xiang Wang ◽  
Yu Zhu Zhang ◽  
Jin Hong Ma ◽  
Su Juan Yuan
Keyword(s):  
Fluid Flow ◽  
Continuous Casting ◽  
Casting Speed ◽  
Three Dimensional ◽  
Casting Process ◽  
Element Model ◽  
3D Fem ◽  
Billet Continuous Casting ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

In this paper, a three-dimensional finite element model is developed to simulate and analyze the turbulent flow in the mould of billet continuous casting. The result shows that if the SEN is used in the continuous casting process, there exists a symmetrical stronger vortex in the middle of the mould and a weaker vortex above the nozzle. The casting speed, the depth and diameter of SEN all have significant effect on the fluid flow field and the turbulent kinetic energy on the meniscus, and then have effect on the billet quality. At the given conditions, the optimum set of parameters is: the casting speed 0.035 , the depth of the SEN 0.1 , the diameter of the SEN 0.025 . Online verifying of this model has been developed, which can be proved that it is very useful to control the steel quality and improve the productivity.

Finite Element Analysis of Nonuniformity of Tires with Imperfections5

2007 ◽  
Vol 35 (3) ◽  
pp. 226-238 ◽  
Author(s):  
K. M. Jeong ◽  
K. W. Kim ◽  
H. G. Beom ◽  
J. U. Park
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Radial Force ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Dimensional Finite Element ◽  
Force Variation ◽  
Three Dimensional Finite Element

Abstract The effects of variations in stiffness and geometry on the nonuniformity of tires are investigated by using the finite element analysis. In order to evaluate tire uniformity, a three-dimensional finite element model of the tire with imperfections is developed. This paper considers how imperfections, such as variations in stiffness or geometry and run-out, contribute to detrimental effects on tire nonuniformity. It is found that the radial force variation of a tire with imperfections depends strongly on the geometrical variations of the tire.

scholarly journals Internal Force on and Deformation of Steel Assembled Supporting Structure of Foundation Pit under Thermal Stress

2021 ◽  
Vol 11 (5) ◽  
pp. 2225
Author(s):  
Fu Wang ◽  
Guijun Shi ◽  
Wenbo Zhai ◽  
Bin Li ◽  
Chao Zhang ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Bending Moment ◽  
High Strength ◽  
Element Model ◽  
Internal Force ◽  
Foundation Pit ◽  
Dimensional Finite Element ◽  
Influence Of Temperature On ◽  
Scale Experiment ◽  
Three Dimensional Finite Element

The steel assembled support structure of a foundation pit can be assembled easily with high strength and recycling value. Steel’s performance is significantly affected by the surrounding temperature due to its temperature sensitivity. Here, a full-scale experiment was conducted to study the influence of temperature on the internal force and deformation of supporting structures, and a three-dimensional finite element model was established for comparative analysis. The test results showed that under the temperature effect, the deformation of the central retaining pile was composed of rigid rotation and flexural deformation, while the adjacent pile of central retaining pile only experienced flexural deformation. The stress on the retaining pile crown changed little, while more stress accumulated at the bottom. Compared with the crown beam and waist beam 2, the stress on waist beam 1 was significantly affected by the temperature and increased by about 0.70 MPa/°C. Meanwhile, the stress of the rigid panel was greatly affected by the temperature, increasing 78% and 82% when the temperature increased by 15 °C on rigid panel 1 and rigid panel 2, respectively. The comparative simulation results indicated that the bending moment and shear strength of pile 1 were markedly affected by the temperature, but pile 2 and pile 3 were basically stable. Lastly, as the temperature varied, waist beam 2 had the largest change in the deflection, followed by waist beam 1; the crown beam experienced the smallest change in the deflection.

Process Modeling in Laser Deposition of Multilayer SS410 Steel

2007 ◽  
Vol 129 (6) ◽  
pp. 1028-1034 ◽  
Author(s):  
Liang Wang ◽  
Sergio Felicelli
Keyword(s):  
Phase Transformation ◽  
Temperature Distribution ◽  
Three Dimensional ◽  
Element Model ◽  
Traverse Speed ◽  
Processing Parameters ◽  
Dimensional Finite Element ◽  
Net Shaping ◽  
Three Dimensional Finite Element ◽  
Continuous Cooling Transformation Diagram

A three-dimensional finite element model was developed to predict the temperature distribution and phase transformation in deposited stainless steel 410 (SS410) during the Laser Engineered Net Shaping (LENS™) rapid fabrication process. The development of the model was carried out using the SYSWELD software package. The model calculates the evolution of temperature in the part during the fabrication of a SS410 plate. The metallurgical transformations are taken into account using the temperature-dependent material properties and the continuous cooling transformation diagram. The ferritic and martensitic transformation as well as austenitization and tempering of martensite are considered. The influence of processing parameters such as laser power and traverse speed on the phase transformation and the consequent hardness are analyzed. The potential presence of porosity due to lack of fusion is also discussed. The results show that the temperature distribution, the microstructure, and hardness in the final part depend significantly on the processing parameters.

Mechanical Simulation of Knee Movement in Basketball Shooting

2013 ◽  
Vol 336-338 ◽  
pp. 760-763
Author(s):  
Hui Yue
Keyword(s):  
Finite Element ◽  
Cruciate Ligament ◽  
Three Dimensional ◽  
Element Model ◽  
Basketball Player ◽  
Knee Movement ◽  
Dimensional Finite Element ◽  
Anterior Cruciate ◽  
Three Dimensional Finite Element

A short explanation of the finite element method as a powerful tool for mathematical modeling is provided, and an application using constitutive modeling of the behavior of ligaments is introduced. Few possible explanations of the role of water in ligament function are extracted from two dimensional finite element models of a classical ligament. The modeling is extended to a three dimensional finite element model for the human anterior cruciate ligament. Simulation of ligament force in pitching motion of basketball player is studied in this paper.

Sign in / Sign up

Export Citation Format

Share Document