The Density of Deformations Distribution on the Side Edges during Strip Rolling

2021 ◽  
Vol 316 ◽  
pp. 340-345
Author(s):  
A.M. Rekov
Keyword(s):  
Cross Section ◽  
Joint Distribution ◽  
Strain State ◽  
Extrusion Ratio ◽  
Strip Rolling ◽  
Stress Strain ◽  
Stress Strain State ◽  
Deformation Intensity ◽  
Flat Rolling ◽  
Deformed State

Experimental densities of intensity distribution for main deformations, as well as the stress strain state of a metal on the side edges of an aluminum strip during its flat rolling, have been determined. Strain, spread and extrusion ratio have been evaluated. The dimensions of the strip cross-section have been chosen in a way that minimizes spreading. Therefore, the deformed state under rolling is close to a flat one. The correlation between the deformation intensity and the stress-strain state of macro-volumes occurred on strip edges has been estimated. The parameters of two-dimensional probability-density function for the joint distribution of deformation intensity and the Nadai-Lode stress-strain parameter have been determined. Distribution densities for longitudinal, transverse deformations and the intensity of main deformations in the zone of strip rolling are bimodal, which corresponds to both forward and backward slip zones under rolling. The results of the work can be used to predict the depletion of plasticity resources during strip rolling.

Stress-Strain State Exploration of Stringer Made of Composite Materials Depending on Layers Stacking Structure

2018 ◽  
Vol 284 ◽  
pp. 71-76
Author(s):  
P.V. Solovyev ◽  
A.I. Gomzin ◽  
L.A. Ishbulatov ◽  
S.N. Galyshev ◽  
F.F. Musin
Keyword(s):  
Composite Materials ◽  
Cross Section ◽  
Strain State ◽  
Stress Strain ◽  
Stress Strain State ◽  
Airplane Wing ◽  
External Loads ◽  
Stacking Structure ◽  
Composite Carbon ◽  
Shaped Cross Section

In this article the results of stress-strain state investigation for composite airplane wing stringer with different layers stacking structures are presented. As an object of research, a stringer made of composite carbon with V-shaped cross-section is considered. Due to the stress-strain state analysis of various stringer structures, the most effective structure for stringer layers stacking is selected, both in the view of providing the most rigidity and optimal perception by the stringer the field of external loads, which are most typical for the conditions of its operation.

The movement investigation of an axisymmetric rotation body under the action of electromagnetic fields

2020 ◽  
Vol 2 (103) ◽  
pp. 67-77
Author(s):  
O. Hrevtsev ◽  
N. Selivanova ◽  
P. Popovych ◽  
L. Poberezhny ◽  
O. Shevchuk ◽  
...  
Keyword(s):  
Electromagnetic Field ◽  
Cross Section ◽  
Variable Thickness ◽  
Structural Damage ◽  
Strain State ◽  
Rectangular Cross Section ◽  
Stress Strain ◽  
Coordinate Time ◽  
Stress Strain State ◽  
Natural Time

Purpose: To ensure an adequate level of accuracy, it is rational to study the ponderomotor forces of the ring, which drive a hollow disk of variable thickness, hung on the ring. Design/methodology/approach: The solution of the motion problem of a hollow disk of variable thickness suspended on a force ring of rectangular cross section is based on the method of solving the equations of the theory of thermoelasticity. The stress-strain state, as well as the motion of the specified body of rotation, the disk, in studies in a cylindrical coordinate system, under the action of ponderomotor forces. Findings: The motion equation of a hollow disk hung on a force ring-torus is made, exact solutions of the motion equations of a ring in the torus form of rectangular cross section are found. New component expressions of ponderomotor forces, which appear from the action of the ring's own electromagnetic field and cause the motion of a hollow disk, have been found on the basis of Maxwell's equations. It is proved that at high speeds and low natural accelerations the stress - strain state of the disk material does not cause the destruction of the structure. Research limitations/implications: Calculations of ponderomorphic forces are valid for the ring, which drives a hollow disk of variable thickness, hung on the ring. Practical implications: It is proved that at high velocities and small natural accelerations the stress-strain state of the disk medium does not cause structural damage. It is determined that the rotation in the direction of movement at an angle of 90 degrees changes only the direction of the acceleration vector without increasing its value. Originality/value: The dependences between own time and coordinate time are formulated. It is proved that a small change in the natural time for the studied disk can significantly change the coordinate time, and the pulsed electromagnetic field provides the ability to cover infinitely large distances over finite periods of time.

scholarly journals A transient dynamic process in a structural nonlinear system “beam – two-parameter foundation”

2020 ◽  
Vol 310 ◽  
pp. 00007
Author(s):  
Vladimir Gordon ◽  
Pavel Morrev ◽  
Olga Pilipenko
Keyword(s):  
Cross Section ◽  
Strain State ◽  
Shear Stiffness ◽  
Arbitrary Cross Section ◽  
Forced Oscillations ◽  
Stiffness Parameter ◽  
Stress Strain ◽  
Stress Strain State ◽  
Internal Forces ◽  
Two Parameter

A method for analytical assessment of dynamic added stress in elastic loaded beam resting on elastic two-parameter Pasternak’s foundation due to sudden destruction a part of foundation is proposed. Equations of static bending, natural and forced oscillations are written in a matrix form using state vectors including deflection, rotational angles, bending moments, and shear forces at arbitrary cross section of a beam and also using the matrices of the initial parameters influence on the stress-strain state in arbitrary cross section. The influence of foundation failure on beam’s stress-strain state, taking into account a relation between the stiffness parameters of foundation, is analyzed. The condition of smallness for the shear stiffness parameter (Pasternak’s parameter) in comparison with the stretching-compressing stiffness parameter (Vinkler’s parameter) is accepted. It is shown that the accounting of Pasternak’s parameter reduces the level of dynamic added stress in a beam when sudden destructing of a foundation. The factor of sudden defect occurrence in the system “beam – foundation” increases considerably the internal forces in a beam in comparison with quasistatic formation of the same defect.

Effect of Stress-Strain State during Combined Deformation on Microstructure Evolution of High Carbon Steel Wire

2016 ◽  
Vol 870 ◽  
pp. 460-465 ◽  
Author(s):  
Alexandr Gulin ◽  
Marina Polyakova ◽  
Eduard Golubchik
Keyword(s):  
Plastic Deformation ◽  
Carbon Steel ◽  
Cross Section ◽  
Strain State ◽  
Steel Wire ◽  
High Carbon Steel ◽  
Grain Structure ◽  
Basic Operation ◽  
Stress Strain ◽  
Stress Strain State

It is shown that new methods of severe plastic deformation design require combining different methods of plastic deformation. As for carbon steel wire, using drawing as a basic operation is obvious. The combination of drawing with bending and twisting was estimated by the stress-strain uniformity complex. It allows choosing the deformation processing conditions which ensure the uniform stress-strain state in each point of the carbon steel wire cross section. Based on such combination, a new method for manufacturing of semi-products with ultra fine grain structure by drawing with torsion was developed. The combination of wire drawing in two consecutively arranged dies with simultaneous bending and torsion allows achieving complex stress-strain state of the processed metal and ensure the share stresses. Metallographic investigation shows that such scheme of combined plastic deformation provides the uniformity of metal microstructure in its cross section.

Sign in / Sign up

Export Citation Format

Share Document