scholarly journals Energetic aspects and opportunities for reusing water on offshore platforms in Campos Basin, Brazil

Author(s):  
Victor Magalhães Duarte ◽  
Luciano Matos Queiroz ◽  
Ednildo Andrade Torres ◽  
Asher Kiperstok

In the drilling and production of oil at sea, a large quantity of potable water used is most commonly transported to oil platforms using offshore supply vessels (OSVs). Sea water desalination is used as well, but only in a few oil platforms. To minimize energy consumption, water supply options were studied. The desalination of seawater and the reusing of streams of grey water and black water were evaluated and compared with the characteristics of the current supply via OSVs. In both desalination and OSV water supply options an electrolytic wastewater treatment plant is used. The objective of this study was to analyze the current situation regarding water supply on offshore platforms located in the Campos Basin, Rio de Janeiro, Brazil, and to propose measures to take advantage of opportunities to reuse water and reduce energy expenditure. Two alternative scenarios were developed that involved the reuse of water that comes from the effluent of a biological wastewater treatment plant (WWTP). Information on the logistics of supplying water to platforms was obtained through direct consultation with companies and sources in the literature. The results show that annual energy consumption (uptake, treatment, transportation, use and waste water treatment) of water on offshore platforms is currently 1.89 GWh, and that a reduction of 1.8 GWh of the energy consumed can be achieved using advanced reuse treatments. Energy consumption in the water reuse treatment is more competitive than those of transport by OSVs or seawater desalination.

2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
ZhenHua Li ◽  
ZhiHong Zou ◽  
LiPing Wang

Wastewater treatment plant (WWTP) is the energy-intensive industries. Energy is consumed at every stage of wastewater treatment. It is the main contributor to the costs of WWTP. Analysis and forecasting of energy consumption are critical to energy-saving. Many factors influence energy consumption. The relationship between energy consumption and wastewater is complex and challenging to identify. This article employed the fuzzy clustering method to categorize the sample data of WWTP and analyzed the relationship between energy consumption and the influence factors in different categories. The study found that energy efficiency in various categories was changed and the same influence factors in different types had different influence intensity. The Radial Basis Function (RBF) neural network was used to forecast energy consumption. The data from the complete set and categories was adopted to train and test the model. The results show that the RBF model using the date from the subset has better performance than the multivariable linear regression (MLR) model. The results of this study provided an essential theoretical basis for energy-saving in WWTP.


2012 ◽  
Vol 66 (6) ◽  
pp. 1277-1281 ◽  
Author(s):  
P. Jenicek ◽  
J. Bartacek ◽  
J. Kutil ◽  
J. Zabranska ◽  
M. Dohanyos

Anaerobic digestion is the only energy-positive technology widely used in wastewater treatment. Full-scale data prove that the anaerobic digestion of sewage sludge can produce biogas that covers a substantial amount of the energy consumption of a wastewater treatment plant (WWTP). In this paper, we discuss possibilities for improving the digestion efficiency and biogas production from sewage sludge. Typical specific energy consumptions of municipal WWTPs per population equivalent are compared with the potential specific production of biogas to find the required/optimal digestion efficiency. Examples of technological measures to achieve such efficiency are presented. Our findings show that even a municipal WWTP with secondary biological treatment located in a moderate climate can come close to energy self-sufficiency. However, they also show that such self-sufficiency is dependent on: (i) the strict optimization of the total energy consumption of the plant, and (ii) an increase in the specific biogas production from sewage sludge to values around 600 L per kg of supplied volatile solids.


2017 ◽  
Vol 33 (1) ◽  
pp. 57-63 ◽  
Author(s):  
Piotr M. Bugajski ◽  
Grzegorz Kaczor ◽  
Krzysztof Chmielowski

AbstractThe paper analyzes the effect of precipitation water that inflowing to sanitary sewage system as accidental water on the changes in the total amount of treated sewage. The effects of accidental water supply on the total amount of sewage inflowing to treatment plant were analyzed based on mean daily amounts from the investigated periods and mean daily amounts from incidental supplies. The study was conducted in the years 2010–2015. Six characteristic research periods were identified (one per each calendar year), when the amount of sewage in the sanitary sewage system was greater than during dry weather. The analysis of changes in the amount of sewage supplied to the sewerage system in the six investigated periods revealed that the accidental water constituted from 26.8% to 48.4% of total sewage inflowing to the wastewater treatment plant (WWTP). In exceptional situations, during intense rains, the share of precipitation water in the sewerage system would increase up to 75%. Then, the rainwater inflowing the sewerage system caused hydraulic overloading of the WWTP by exceeding its maximum design supply.


2020 ◽  
Author(s):  
Nicolas Caradot ◽  
Wolfgang Seis ◽  
Dan Angelescu ◽  
Vaizanne Huynh ◽  
Andreas Hausot ◽  
...  

<div> <p>Digital solutions open up a variety of opportunities for the water sector. Digital water is now seen not as an ‘option’ but as an ‘imperative’ (Sarni et al., 2019) for a more sustainable and secure water management. Many solutions leverage the latest innovations developed across industries and business activities including advanced sensors, data analytics and artificial intelligence. The potential of digitalization might outweigh its associated risk if digital solutions are successfully implemented addressing a series of gaps and barriers such as ICT governance, cybersecurity, data protection, interoperability and capacity building.</p> <p>Within this context, the H2020 innovation project digital-water.city (DWC) aims at boosting the integrated management of waters systems in five major European cities – Berlin, Copenhagen, Milan, Paris and Sofia – by leveraging the potential of data and digital technologies. Goal is to quantify the benefits of a panel of 15 innovative digital solutions and achieve their long-term uptake and successful integration in the existing digital systems and governance processes.</p> <p>One of these promising technology is a new sensor for real-time bacterial measurements, manufactured by the company Fluidion (ALERT System; Angelescu et al., 2019). The device is fully autonomous, remotely controllable, installed in-situ and allows rapid quantification of E.coli and enterococci concentrations.</p> <p>Ensuring microbial safety is one of the key objectives of bathing water management, and it is also a critical aspect for water reuse. The European Bathing Water Directive (BWD) (76/160/EEC, 2006) uses fecal indicator bacteria for quality assessment of marine and inland waters. A major challenge regarding bathing water management is that concentrations of fecal bacteria may show spatial and temporal variability. In urban rivers, discharges from CSO and stormwater may contain high amounts of fecal bacteria and contaminate bathing water quality. Bathing water surveillance in Europe is only based on monthly grab samples and event-scale variability is detected only by chance as pollution events may occur between sampling intervals.</p> <p>The ALERT System is currently tested in Berlin and Paris using side by side laboratory comparison to understand temporal variability and spatial bacterial distribution in the local rivers (Seine, Marne and Spree). In Milan, the system is being deployed to provide early warning of bacterial and toxic contamination linked to water reuse at a major wastewater treatment plant. Preliminary analysis have shown that the device shows metrological capabilities comparable to those of an approved laboratory using MPN microplate techniques and is suitable for bacterial pollutant concentration ranges such as urban streams and wastewater treatment plant.</p> <p>The technology opens up new opportunities for the water sector for a range of applications such as the planning of pollution reduction measures, the continuous monitoring of bathing water quality and the assessment of contamination risk by the reuse of treated wastewater for irrigation. In particular, it is a key innovation to contribute to the objective of Paris city and other local municipalities to provide permanent and safe opportunities for bathing in the Seine river for the 2024 Olympic and Paralympic Games, and beyond.</p> </div>


Sign in / Sign up

Export Citation Format

Share Document