COMPARISON OF YIELD COMPONENTS OF RED CLOVER AND ALFALFA

1988 ◽  
Vol 68 (1) ◽  
pp. 103-114 ◽  
Author(s):  
S. R. BOWLEY ◽  
C. T. DOUGHERTY ◽  
N. L. TAYLOR ◽  
P. L. CORNELIUS
Keyword(s):  
Medicago Sativa ◽  
Yield Components ◽  
Trifolium Pratense ◽  
Total Yield ◽  
Red Clover ◽  
Herbage Yield ◽  
Trifolium Pratense L ◽  
Medicago Sativa L ◽  
Stem Development ◽  
Selection For

Yield components of five regrowth cycles, two in 1981 and three in 1982, of three red clover (Trifolium pratense L.) populations and three alfalfa (Medicago sativa L.) cultivars were compared in swards. Red clover left more stubble but produced less herbage and accumulated total yield (herbage, stubble and 10 cm depth root) at a slower rate than alfalfa during most regrowths. The percent leaf at flowering of red clover was similar to that of alfalfa. Maximum LAI declined during successive regrowths each year. Maximum crop growth rates were 30 and 34 g m−2 d−1 for red clover and alfalfa, respectively. Stem development (canopy height) followed patterns of accumulation of herbage yield. The initiation of stems was slower in red clover and stem populations were less than that of alfalfa. Selection for faster stem initiation rates, higher stem populations, and reduced partitioning of dry matter towards stem bases which would be left as stubble were suggested as ways of increasing the herbage yield of red clover.Key words: Trifolium pratense L., Medicago sativa L., yield components, growth analysis clover (red), alfalfa

scholarly journals Comparison of the Polyphenolic Profile of Medicago sativa L. and Trifolium pratense L. Sprouts in Different Germination Stages Using the UHPLC-Q Exactive Hybrid Quadrupole Orbitrap High-Resolution Mass Spectrometry

Molecules ◽  
2020 ◽  
Vol 25 (10) ◽  
pp. 2321 ◽  
Author(s):  
Elena Roxana Chiriac ◽  
Carmen Lidia Chiţescu ◽  
Daniela Borda ◽  
Mariana Lupoae ◽  
Cerasela Elena Gird ◽  
...  
Keyword(s):  
Medicago Sativa ◽  
Trifolium Pratense ◽  
High Resolution Mass Spectrometry ◽  
Estrogenic Activity ◽  
Red Clover ◽  
Rapid Separation ◽  
Fragment Ions ◽  
Trifolium Pratense L ◽  
Medicago Sativa L ◽  
Identification And Quantification

Identification and quantification of polyphenols in plant material are of great interest since they make a significant contribution to its total bioactivity. In the present study, an UPLC-Orbitrap-MS/MS approach using the variable data acquisition mode (vDIA) was developed and applied for rapid separation, identification, and quantification of the main polyphenolic compounds in Medicago sativa L. and Trifolium pratense L. sprouts in different germination stages. Based on accurate MS data and fragment ions identification strategy, a total of 29 compounds were identified by comparing their accurate masses, fragment ions, retention times, and literatures. Additionally, a number of 30 compounds were quantified by comparing to the reference standards. Data were statistically analysed. For both plant species, the sprouts of the third germination day are valuable sources of bioactive compounds and could be used in phytotherapy and nutrition. Although Trifolium pratense L. (Red Clover) is considered to be a reference for natural remedies in relieving menopause disorders, alfalfa also showed a high level of biological active compounds with estrogenic activity.

scholarly journals Effectiveness of the process of cleaning natural alfalfa (Medicago sativa L.) and red clover (Trifolium pratense L.) seeds

2020 ◽  
Vol 24 (1) ◽  
pp. 9-12
Author(s):  
Dragoslav Đokić ◽  
Rade Stanisavljević ◽  
Jasmina Milenković ◽  
Ranko Koprivica ◽  
Jasmina Knežević ◽  
...  
Keyword(s):  
Medicago Sativa ◽  
Trifolium Pratense ◽  
Red Clover ◽  
Trifolium Pratense L ◽  
Medicago Sativa L

RESPONSE TO SELECTION FOR STEM LENGTH IN RED CLOVER EVALUATED AT WIDE AND NARROW SPACINGS

1984 ◽  
Vol 64 (4) ◽  
pp. 925-934 ◽  
Author(s):  
S. R. BOWLEY ◽  
N. L. TAYLOR ◽  
P. L. CORNELIUS ◽  
C. T. DOUGHERTY
Keyword(s):  
Recurrent Selection ◽  
Trifolium Pratense ◽  
Red Clover ◽  
Stem Length ◽  
Yield Response ◽  
Response To Selection ◽  
Breeding Programs ◽  
Herbage Yield ◽  
Trifolium Pratense L ◽  
Selection For

Six cycles of phenotypic recurrent selection for stem length were conducted in a 91-cm-spaced planted population of red clover (Trifolium pratense L.) as a means of increasing herbage yield. The objectives of this investigation were (1) to compare the effectiveness of selection for stem length tested in transplants at wide (91 cm) and narrow (7 cm) spacings, and in row seedings and (2) to determine the effect of selection for stem length on herbage yield. Response to selection for stem length was obtained under all plantings; however, greater gains were observed at the wide transplant spacing (3.3 cm∙cycle−1) compared to the narrow transplant spacing (0.7 cm∙cycle−1) and row seeding (0.8 cm∙cycle−1). Densely spaced transplants gave performance similar to row seedings and may be of value to forage crop breeders in situations where yield or quality assessment is desired but seed supplies are insufficient for the establishment of seeded plots, such as in the early stages of breeding programs. Selection for stem length was effective in increasing herbage yield at first harvest but was associated with reduced persistance, decreased regrowth yields, and increased partitioning of dry matter towards the shoot rather than the root during seedling development. Selection for stem length in the regrowth or in the second year, rather than in the primary (seedling) growth, might have avoided the declines in persistence and regrowth yields.Key words: Trifolium pratense L., red clover, recurrent selection, stem length, density, herbage yield

PARATYLENCHUS BREVIHASTUS N. SP. (CRICONEMATIDAE: NEMATODA)

1962 ◽  
Vol 40 (3) ◽  
pp. 391-393
Author(s):  
Liang-Yu Wu
Keyword(s):  
Medicago Sativa ◽  
Trifolium Pratense ◽  
Red Clover ◽  
Male And Female ◽  
Trifolium Pratense L ◽  
Medicago Sativa L

Male and female specimens of Paratylenchus brevihastus n. sp. were collected in Ontario, Canada, from soil around the roots of blue violets (Viola cucullata Ait.) and grass, alfalfa (Medicago sativa L.), oats (Avena sp.), and red clover (Trifolium pratense L.) during 1958 to 1961. This species has characters close to those of Paratylenchus microdorus, but differs from it in having spear knobs with rather flat anterior surfaces and front of lip region with truncate appearance. Males present.

scholarly journals Accumulation of heavy metals in Medicago sativa L. and Trifolium pratense L. at the contaminated fluvisol

2013 ◽  
Vol 67 (1) ◽  
pp. 95-101 ◽  
Author(s):  
Snezana Jaksic ◽  
Savo Vuckovic ◽  
Sanja Vasiljevic ◽  
Nada Grahovac ◽  
Vera Popovic ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Medicago Sativa ◽  
Trifolium Pratense ◽  
Anthropogenic Impacts ◽  
Total Content ◽  
Interactive Effects ◽  
Trifolium Pratense L ◽  
Medicago Sativa L ◽  
Agricultural Areas ◽  
Toxic Concentrations

Recently, heavy metals concentrations increased in some agricultural areas due to the consequences of anthropogenic impacts. The aim of this study was to determine the level of heavy metals (As, Cr, Ni and Pb) in Medicago sativa L. and Trifolium pratense L. grown on fluvisol, in order to obtain information on safety of these nutrients. The total content of Pb, As, Cr and Ni in the samples of fluvisol was above the maximum allowable amount. The content of heavy metals in Medicago sativa L. and Trifolium pratense L. was below the critical and toxic concentrations in all samples originating from contaminated soil. It was concluded that the accumulation of heavy metals in plants did not depend only on the total content in soil, but also the affinity of the plant, and individual and interactive effects of various soil properties. No statistically significant differences in the accumulation of heavy metals between Medicago sativa L. and Trifolium pratense L were observed. It is necessary to further control of heavy metals in the investigated area, in order to prevent their entry into the food chain and provide healthy food.

COLOR INFRARED AERIAL PHOTOGRAPHY TO IDENTIFY FORAGE LEGUMES IN HAY FIELDS

1981 ◽  
Vol 61 (2) ◽  
pp. 331-336 ◽  
Author(s):  
P. K. BASU
Keyword(s):  
Trifolium Pratense ◽  
Red Clover ◽  
Aerial Photographs ◽  
Forage Legume ◽  
Image Characteristics ◽  
Mixed Crop ◽  
Trifolium Pratense L ◽  
Medicago Sativa L ◽  
The Individual ◽  
Agricultural Areas

In September 1977 and 1978, color infrared (CIR) aerial photographs of mixed agricultural areas (approx. 132.7 km2) near Vernon and Carp, Ontario, and of forage legume test plots at Ottawa were taken at a scale of 1:6000. Extensive ground surveys were conducted within 2 wk after the photographic flights to verify CIR images of alfalfa (Medicago sativa L.), red clover (Trifolium pratense L.), trefoil (Lotus corniculatus L.), vetch (Vicia spp.) grasses and their mixtures in the original transparencies. A number of photographic image characteristics of legumes and grasses have been illustrated by which a reliable identification and subsequent quantification of legume components were made, particularly in fields that showed decline of a crop or when the individual components grew as separate patches in the same field. Photo-interpretation difficulties existed in distinguishing the components in a very uniformly mixed crop and recently cut fields.

Selection for resistance to Fusarium wilt in red clover

1999 ◽  
Vol 79 (3) ◽  
pp. 351-356 ◽  
Author(s):  
B. C. Venuto ◽  
R. R. Smith ◽  
C. R. Grau
Keyword(s):  
Fusarium Oxysporum ◽  
Fungal Pathogen ◽  
Trifolium Pratense ◽  
Red Clover ◽  
Severity Index ◽  
Research Station ◽  
Vascular Wilt ◽  
Trifolium Pratense L ◽  
Selection For ◽  
Overall Resistance

In Wisconsin, Fusarium oxysporum, Schlect., a pathogen causing vascular wilt, is the most prevalent fungal pathogen recovered from diseased red clover (Trifolium pratense L.) plants. This study was conducted to determine the mode of inheritance for red clover resistance to this pathogen and to develop resistant germplasm. Virulent isolates of this pathogen, collected from red clover plants at the Ashland Research Station, Ashland, Wisconsin, were used to screen three populations, the red clover cultivars Arlington and Marathon and the C11 germplasm, for resistant plants. Plants were inoculated with the pathogen and evaluated for reaction, using a disease-severity index (DSI) score from 1 to 5 (1 = no reaction, 5 = plant dead). Selected plants from each cycle were intercrossed to produce subsequent generations. After two and three cycles of selection, the developed populations were simultaneously evaluated for gain from selection. The gain from selection for resistance in these populations (cycle 0 minus cycle 2) ranged from 0.31 to 0.48, 0.12 to 0.75, and 0.13 to 0.83 DSI units, respectively, for Arlington, Marathon, and C11. Estimated narrow-sense heritabilities, based on cycle-1 and cycle-2 progeny, were, respectively, 0.20 and 0.37 for Arlington, 0.15 and 0.13 for Marathon, and 0.06 and 0.17 for C11. These results indicate that resistance is a quantitative trait controlled by many loci, each contributing some portion to overall resistance in the host. Key words: Red clover, Trifolium pratense L., Fusarium oxysporum, vascular wilt, resistance

Sign in / Sign up

Export Citation Format

Share Document