scholarly journals Biological Treatment of Meat Processing Wastewater Using Lab-Scale Anaerobic-Aerobic/Anoxic Sequencing Batch Reactors Operated in Series

Author(s):  
David Nzioka Mutua ◽  
Eliud Nyaga Mwaniki Njagi
1986 ◽  
Vol 18 (6) ◽  
pp. 21-33 ◽  
Author(s):  
D. Orhon ◽  
Y. Cimşit ◽  
O. Tünay

All factors affecting substrate removal in sequencing batch reactor types of biological treatment systems should be fully explored to benefit from the many flexibilities of operation they offer. In this paper, a growth limited model is proposed for this purpose and verified by experimental observations. Interpretation of the results enabled a broader description of the process. It also indicated a number of interesting issues requiring further exploration.


1990 ◽  
pp. 1121-1122
Author(s):  
J. Kaufmann ◽  
H. Krebs ◽  
O. Debus ◽  
P. Wilderer ◽  
M. Rubio

1997 ◽  
Vol 35 (1) ◽  
pp. 185-192 ◽  
Author(s):  
D. P. Cassidy ◽  
R. L. Irvine

A silty clay loam contaminated with diesel fuel was treated in the laboratory using periodically operated slurry and solid phase bioreactors. Soil Slurry-Sequencing Batch Reactors (SS-SBRs) were operated with a 40% solids concentrations (w/v) to determine the effect of hydraulic residence time and volumetric replacement strategy on performance. Solid Phase-Sequencing Batch Reactors (SP-SBRs) were operated with the same silty clay loam artificially contaminated with diesel fuel. Different periodic aeration strategies were investigated in the SP-SBRs in an attempt to minimize volatile losses without sacrificing overall removal efficiency. Results showed that a day 10 HRT in the SS-SBRs was optimal for the soil tested. The rate and extent of diesel fuel removal was increased by providing a higher concentration of diesel fuel at the beginning of the SBR cycle, indicating that removal rates are not zero-order. The findings also showed that a properly operated periodic venting strategy produced high overall removal efficiencies with considerably less volatilization than continuous aeration.


2007 ◽  
Vol 55 (6) ◽  
pp. 143-150 ◽  
Author(s):  
D.B. Ruas ◽  
A.H. Mounteer ◽  
A.C. Lopes ◽  
B.L. Gomes ◽  
F.D. Brandão ◽  
...  

Effectiveness of ozonation before and after biological treatment for removal of recalcitrant organic matter in bleached kraft pulp effluents was compared. Two industrial ECF bleached eucalypt kraft pulp effluents (E1 and E2) were pretreated with 100 mg O3/L. Raw and pretreated effluents were treated biologically in bench-scale sequencing batch reactors, under constant conditions. Following biological treatment, effluents were post-treated with 100 and 200 mg O3/L. Effluent pretreatment increased effluent biodegradability by 10% in E1 and 24% in E2. Combined O3-biological treated led to small but significant increases in COD, BOD and lignin removal over biological treatment alone, but pretreatment had no significant effect on effluent colour and carbohydrate removal. Ozone pretreatment did not affect biological activity during treatment of effluent E1 but resulted in a 38% lower specific oxygen uptake rate in effluent E2. At an equivalent dose of 100 mg/L, pre-ozonation produced better quality effluent than post-ozonation, especially with regard to COD and colour. Likewise, when an equivalent dose of 200 mg/L was applied, splitting the dose equally between pre- and post-treatments was more efficient than applying the entire dose in the post-treatment. The potential for combined chemical–biological treatment to improve effluent quality has been confirmed in this study.


Sign in / Sign up

Export Citation Format

Share Document