scholarly journals Theoretical Analysis of Melt Spinning

1965 ◽  
Vol 18 (3) ◽  
pp. 188-204 ◽  
Author(s):  
S. Kase ◽  
T. Matsuo
2007 ◽  
Vol 8 (5) ◽  
pp. 507-511 ◽  
Author(s):  
Tae Hwan Oh ◽  
Young Sik Nam ◽  
Kap Jin Kim ◽  
Young Ho Kim

Author(s):  
S. Kase ◽  
T. Matsuo ◽  
Y. Yoshimoto

Author(s):  
A. Gómez ◽  
P. Schabes-Retchkiman ◽  
M. José-Yacamán ◽  
T. Ocaña

The splitting effect that is observed in microdiffraction pat-terns of small metallic particles in the size range 50-500 Å can be understood using the dynamical theory of electron diffraction for the case of a crystal containing a finite wedge. For the experimental data we refer to part I of this work in these proceedings.


Author(s):  
Raja K. Mishra

The discovery of a new class of permanent magnets based on Nd2Fe14B phase in the last decade has led to intense research and development efforts aimed at commercial exploitation of the new alloy. The material can be prepared either by rapid solidification or by powder metallurgy techniques and the resulting microstructures are very different. This paper details the microstructure of Nd-Fe-B magnets produced by melt-spinning.In melt spinning, quench rate can be varied easily by changing the rate of rotation of the quench wheel. There is an optimum quench rate when the material shows maximum magnetic hardening. For faster or slower quench rates, both coercivity and maximum energy product of the material fall off. These results can be directly related to the changes in the microstructure of the melt-spun ribbon as a function of quench rate. Figure 1 shows the microstructure of (a) an overquenched and (b) an optimally quenched ribbon. In Fig. 1(a), the material is nearly amorphous, with small nuclei of Nd2Fe14B grains visible and in Fig. 1(b) the microstructure consists of equiaxed Nd2Fe14B grains surrounded by a thin noncrystalline Nd-rich phase. Fig. 1(c) shows an annular dark field image of the intergranular phase. Nd enrichment in this phase is shown in the EDX spectra in Fig. 2.


Author(s):  
S. Hagège ◽  
U. Dahmen ◽  
E. Johnson ◽  
A. Johansen ◽  
V.S. Tuboltsev

Small particles of a low-melting phase embedded in a solid matrix with a higher melting point offer the possibility of studying the mechanisms of melting and solidification directly by in-situ observation in a transmission electron microscope. Previous studies of Pb, Cd and other low-melting inclusions embedded in an Al matrix have shown well-defined orientation relationships, strongly faceted shapes, and an unusual size-dependent superheating before melting.[e.g. 1,2].In the present study we have examined the shapes and thermal behavior of eutectic Pb-Cd inclusions in Al. Pb and Cd form a simple eutectic system with each other, but both elements are insoluble in solid Al. Ternary alloys of Al (Pb,Cd) were prepared from high purity elements by melt spinning or by sequential ion implantation of the two alloying additions to achieve a total alloying addition of up to lat%. TEM observations were made using a heating stage in a 200kV electron microscope equipped with a video system for recording dynamic behavior.


Author(s):  
H.-J. Cantow ◽  
M. Kunz ◽  
M. Möller

In transmission electron microscopy the natural contrast of polymers is very low. Thus the contrast has to be enhanced by staining with heavy metals. The resolution is limited by the size of the staining particles and by the fact that electrons with different energy are focused in different image planes due to the chromatic aberration of the magnetic lenses. The integration of an electron energy loss spectrometer into the optical coloumn of a transmission electron microscope offers the possibility to use monoenergetic electrons and to select electrons with a certain energy for imaging. Thus contrast and resolution are enhanced. By imaging only electrons with an element specific energy loss the element distribution in the sample can be obtained. In addition, elastic bright field images and diffraction patterns yield excellent resolution. Some applications of the method on multicomponent polymer materials are discussed.Bulk polymer samples were prepared by ultramicrotoming at room temperature or well below the glass transition temperature. Very thin films for the direct observation of the structure in semicrystalline polymers were obtained by melt-spinning. Specimens were examined with a ZEISS CEM 902 operated at 80 kV.


2001 ◽  
Vol 84 (7) ◽  
pp. 27-36
Author(s):  
Aki Yuasa ◽  
Daisuke Itatsu ◽  
Naoki Inagaki ◽  
Nobuyoshi Kikuma

1997 ◽  
Vol 2 (2) ◽  
pp. 118-124
Author(s):  
Geoffrey Hall

Patients who have undergone several sessions of chemotherapy for cancer will sometimes develop anticipatory nausea and vomiting (ANV), these unpleasant side effects occurring as the patients return to the clinic for a further session of treatment. Pavlov's analysis of learning allows that previously neutral cues, such as those that characterize a given place or context, can become associated with events that occur in that context. ANV could thus constitute an example of a conditioned response elicited by the contextual cues of the clinic. In order to investigate this proposal we have begun an experimental analysis of a parallel case in which laboratory rats are given a nausea-inducing treatment in a novel context. We have developed a robust procedure for assessing the acquisition of context aversion in rats given such training, a procedure that shows promise as a possible animal model of ANV. Theoretical analysis of the conditioning processes involved in the formation of context aversions in animals suggests possible behavioral strategies that might be used in the alleviation of ANV, and we report a preliminary experimental test of one of these.


Sign in / Sign up

Export Citation Format

Share Document