scholarly journals Isolation of Alkalophilic Pectinolytic Bacteria and their Bio Retting Effect on Kenaf Fiber Compositions

2021 ◽  
Vol 36 (2) ◽  
pp. 156-165
Author(s):  
Munir Hossain ◽  
Shafiq Siddiquee ◽  
Vijay Kumar

Retting is the most limiting process of high-quality cellulosic kenaf bast fiber production which facilitating the separation of useable fiber from the plants' cell wall matrix. Existing traditional water retting approach confronts ineptitude and eutrophication related complications. Aiming to enhance the kenaf bio-retting process, sixty-seven alkalophilic bacterial colonies were isolated from paddy land soil sediments and kenaf retting water. These isolates were subsequently screened, of that two isolates were selected based on hyper qualitative and quantitative pectinolytic enzymatic measures. 16s rDNA gene sequence analysis revealed that both two strains were closely related to Bacillus pumilus species and designated as KRB56 and KRB22. These strains were applied in augmented non-sterile kenaf tank retting to investigate their kenaf retting efficiency and yielded fiber were analyzed for chemical compositions. Results revealed that, stains KRB56 and KRB22 significantly improve the retting process by degradation of 82.78% and 75.28% non-cellulosic gums, respectively comparing with uninoculated treatment niche (62.12%). Based on un retted raw kenaf fiber maximum fiber bundle weight was reported in MTW with 16.04% material losses, while the SW, and FW treatments showed 24.38%, and 21.03% material losses, respectively. These bacterial treated fiber samples showed thinner, smooth, and cleaner fibers surface morphology by SEM indicates sufficient non cellulosic gums (NCGs) removal comparing with URKF. Moreover, yielded fibers were examined for chemical composition, FTIR, XRD test. Results revealed that compare to un retted and un inoculated kenaf fiber, bacterial treated kenaf fiber increases cellulose portions, and their crystallinity index increases 35.50-41.30 % due to sufficient NCGs removal. This study's findings indicate that isolated alkalophilic bacterial strains KRB56 and KRB22 were effectively to be used as kenaf bio retting agents to produce quality kenaf fiber.

2013 ◽  
Vol 594-595 ◽  
pp. 644-647
Author(s):  
Abdul Rahman Rozyanty ◽  
M.Y. Nur Firdaus ◽  
Luqman Musa

The biocomposites were prepared by using kenaf bast fiber mat as reinforcing materials at different percentage. The kenaf bast fiber was treated with alkaline at different sodium hydroxide (NaOH) percentage. Composites which were made from treated alkaline kenaf treated bast fiber showed better mechanical properties (tensile) than those of the unmodified. Scanning electron microscope analysis showed the evidence of the enhancement of the compatibility between kenaf bast fiber and the matrix. The percentage of kenaf fiber in composites also plays a crucial role in determining the composite properties.


2010 ◽  
Vol 60 (3) ◽  
pp. 289-295 ◽  
Author(s):  
Yicheng Du ◽  
Jilei Zhang ◽  
Hossein Toghiani ◽  
Thomas E. Lacy ◽  
Yibin Xue ◽  
...  

2013 ◽  
Vol 795 ◽  
pp. 631-634 ◽  
Author(s):  
A.R. Rozyanty ◽  
M.Y. Nur Firdaus ◽  
M.A.A. Mohd Salleh ◽  
L. Musa

The biocomposites were prepared by using kenaf bast fiber mat as reinforcing materials at different percentage. The kenaf bast fiber was treated with alkaline at different sodium hydroxide (NaOH) percentage. From the results obtained, surface morphology of the treated kenaf bast fiber shows less impurity than untreated kenaf bast fiber. As for composites prepared from alkaline treated kenaf bast fiber, it showed higher mechanical properties as compared to those prepared from untreated kenaf bast fiber. The percentage of kenaf fiber in composites also plays a crucial role in determining the composite properties.


2011 ◽  
Vol 264-265 ◽  
pp. 469-474 ◽  
Author(s):  
A. Zuliahani ◽  
H.D. Rozman ◽  
G.S. Tay

In the present study, lignocellulosic-epoxy composites were prepared from Kenaf bast fiber at different loadings using resin infusion method. Montmorillonite (MMT) was used as a filler which would be mixed in the epoxy resin before the mixture (resin, hardener and MMT) was infused to the Kenaf fiber mat. The effect of modification on MMT was also studied in this work. MMT was modified using grafting process, which the oxygen in MMT were grafted with isocyanates group from Hexamethylene Diisocyanate (HMDI). The mechanical properties of the composites prepared were improved as Kenaf fiber loadings increased. This indicated that the reinforcement effect by additional of Kenaf fiber was evident. The mechanical properties of the composite can be further enhanced by additional of MMT or HMDI-MMT.


2005 ◽  
Vol 59 (9) ◽  
pp. 1354-1366
Author(s):  
Yu Wang ◽  
Wiwin Suwinarti ◽  
Shinji Fujiwara ◽  
Kazuhiko Sameshima ◽  
Zhou Cheng

2009 ◽  
Vol 40 (3) ◽  
pp. 189-196 ◽  
Author(s):  
Yibin Xue ◽  
Yicheng Du ◽  
Steve Elder ◽  
Kunpeng Wang ◽  
Jilei Zhang

2001 ◽  
Vol 57 (3) ◽  
pp. 88-93 ◽  
Author(s):  
Qiye Yang ◽  
Junn Morisawa ◽  
Yoshito Ohtani ◽  
Kazuhiko Sameshima

2016 ◽  
Vol 8 (2) ◽  
pp. 168-172 ◽  
Author(s):  
Hoik Lee ◽  
Kyung Hun Song ◽  
Seung Soon Im ◽  
Jong-Sun Jung ◽  
Abdul Wahab Jatoi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document