scholarly journals Inadequate Vertical Bone Dimension Managed by Bone-added Osteotome Sinus Floor Elevation (BAOSFE): A Literature Review and Case Report

2009 ◽  
Vol 10 (3) ◽  
pp. 81-88 ◽  
Author(s):  
Shilpa Kolhatkar ◽  
Leyvee Cabanilla ◽  
Monish Bhola
Keyword(s):  
Case Report ◽  
Literature Review ◽  
Clinical Significance ◽  
Sinus Floor Elevation ◽  
Implant Placement ◽  
Sinus Floor ◽  
Osteotome Sinus Floor Elevation ◽  
Bone Height ◽  
Maxillary Region

Abstract Aim The purpose of this report is to provide a brief literature review of the bone-added osteotome sinus floor elevation (BAOSFE) procedure and to present a case utilizing this technique. Background Implant placement in the posterior maxillary region is often compromised due to anatomic limitations. In clinical situations where there is inadequate vertical bone dimension, the BAOSFE technique can be employed to increase bone height and allow placement of implants with an appropriate length dimension. Case Report A case of a 60-year-old female with inadequate vertical bone dimension in the area of an extracted #13 is presented. The BAOSFE technique was performed which facilitated the placement of a 3.75 X 13 mm implant. Summary Anatomic limitations such as inadequate vertical bone dimension in the posterior maxillary region may result in placement of shorter implants. Sinus floor elevation (SFE) procedures using a crestal approach such as the BAOSFE, in certain selected cases, can effectively and predictably increase bone height. Clinical Significance The BAOSFE technique is an excellent procedure that can overcome limitations associated with the posterior maxillary region. Citation Kolhatkar S, Cabanilla L, Bhola M. Inadequate Vertical Bone Dimension Managed by Bone-added Osteotome Sinus Floor Elevation (BAOSFE): A Literature Review and Case Report. J Contemp Dent Pract 2009 May; (10)3:081-088.

scholarly journals Staged Osteotome Sinus Floor Elevation for Progressive Site Development and Immediate Implant Placement in Severely Resorbed Alveolar Bone: A Case Report

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Saad Al-Almaie
Keyword(s):  
Case Report ◽  
Bone Grafting ◽  
Alveolar Bone ◽  
Lateral Approach ◽  
Sinus Floor Elevation ◽  
Site Development ◽  
Implant Placement ◽  
Initial Stability ◽  
Sinus Floor ◽  
Osteotome Sinus Floor Elevation

This case report discusses osteotome sinus floor elevation (OSFE) and immediate placement in 2 stages in severely resorbed alveolar bone height in which multiple implant placement is not otherwise feasible due to a lack of initial stability. The first implant placed using OSFE without bone grafting prepares the adjacent resorbed sites for further implant placement in the sinus areas, which allows for better initial stability and early functional loading. This process avoids the conventional extensive lateral approach for sinus lifting and bone grafting procedures even in extremely resorbed alveolar bone.

scholarly journals Displacement of the full body of a dental implant into the sinus space without membrane perforation and subsequent osseointegration: a case report

2021 ◽  
Vol 49 (12) ◽  
pp. 030006052110606
Author(s):  
Xun Xia ◽  
Zhen-Yu Wei ◽  
Hong-Wu Wei
Keyword(s):  
Maxillary Sinus ◽  
Clinical Results ◽  
Sinus Floor Elevation ◽  
Implant Placement ◽  
Membrane Perforation ◽  
Maxillary Sinus Floor ◽  
Sinus Floor ◽  
Osteotome Sinus Floor Elevation ◽  
Bone Height ◽  
Implant Displacement

An increasing number of studies have investigated the use of osteotome sinus floor elevation (OSFE) with simultaneous implant placement for maxillary sinus floor residual bone height (RBH) <4 mm. Many studies have reported good clinical results, but very few have reported complications related to this procedure. Here, the case of a 50-year-old female patient with an RBH in the left upper posterior region of 1–4 mm, who underwent OSFE with simultaneous placement of three Bicon short® implants, is described. One of the implants was found to be displaced during the second-stage surgery. The displaced implant was removed using piezosurgery, OSFE with simultaneous implant placement was repeated, and the missing tooth was reconstructed 6 months later. This case suggests that OSFE with simultaneous implant placement is feasible for severely atrophic maxillary sinus floor, but carries a risk of implant displacement.

scholarly journals Paradigm Shift in the Management of the Atrophic Posterior Maxilla

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Rabah Nedir ◽  
Nathalie Nurdin ◽  
Paul Khoury ◽  
Marc El Hage ◽  
Semaan Abi Najm ◽  
...  
Keyword(s):  
Lateral Sinus ◽  
Efficient Treatment ◽  
Sinus Floor Elevation ◽  
Implant Placement ◽  
Single Crown ◽  
Posterior Maxilla ◽  
Atrophic Maxilla ◽  
Sinus Floor ◽  
Osteotome Sinus Floor Elevation ◽  
Bone Height

When the posterior maxilla is atrophic, the reference standard of care would be to perform sinus augmentation with an autologous bone graft through the lateral approach and delayed implant placement. However, placement of short implants with the osteotome sinus floor elevation technique and without graft can be proposed for an efficient treatment of clinical cases with a maxillary residual bone height of 4 to 8 mm. The use of grafting material is recommended only when the residual bone height is ≤4 mm. Indications of the lateral sinus floor elevation are limited to cases with a residual bone height ≤ 2 mm and fused corticals, uncompleted healing of the edentulous site, and absence of flat cortical bone crest or when the patient wishes to wear a removable prosthesis during the healing period. The presented case report illustrates osteotome sinus floor elevation with and without grafting and simultaneous implant placement in extreme conditions: atrophic maxilla, short implant placement, reduced healing time, and single crown rehabilitation. After 6 years, all placed implants were functional with an endosinus bone gain.

scholarly journals Maxillary Implant Placement in a Limited Residual Bone Height

2021 ◽  
Vol 28 (2) ◽  
Author(s):  
Calvin Kurnia ◽  
◽  
Jane Amelia V. Wibisono ◽  
Dominica Dian S. Sumantri ◽  
◽  
...  
Keyword(s):  
Case Report ◽  
Surgical Procedures ◽  
Invasive Procedure ◽  
Schneiderian Membrane ◽  
Comprehensive Management ◽  
Implant Placement ◽  
The Right ◽  
Bone Height ◽  
Placement Procedure ◽  
Maxillary Region

The limitation of residual bone height (RBH) and vital structures such as sinuses in the maxillary often make the implant placement procedure becomes complicated. Clinicians may perform sinus elevation prior to implant placement to accommodate the length of the implant fixture. Sinus elevation is an invasive procedure and complication may occur during the surgery including the most frequent complication is perforation of Schneiderian membrane. Objectives: To discuss a comprehensive management of implant placement and its complication step by step from surgical procedures to crown placement Case Report: 67-year-old female patient with partial edentulism in the right maxillary region, presence of sinus septum, and RBH was 4mm. The patient was planned to do sinus elevation surgery prior to implant placement, perforation of the Schneiderian membrane occurred while surgery performed and pericardium membrane was attached around the perforation site. Sinus re-entry and implant placement were performed after 3 months followed by prosthetics procedures in the next 6 month. Conclusion: Dental implant is a complicated treatment and complication may occur during the placement, thus a comprehensive management is very essential to minimize the risk of complications.

scholarly journals Maxillary Sinus Floor Elevation

2018 ◽  
Vol 2 (2) ◽  
pp. 495-498
Author(s):  
Jorge Gatica ◽  
Claudio Garayar
Keyword(s):  
Maxillary Sinus ◽  
Oral Surgery ◽  
Sinus Lift ◽  
Sinus Floor Elevation ◽  
Rehabilitative Treatment ◽  
Implant Placement ◽  
Maxillary Sinus Floor ◽  
Sinus Floor ◽  
Bone Height ◽  
Maxillary Sinus Floor Elevation

The sinus lift is a procedure that is used frequently in oral surgery, different techniques exist to perform this procedure approaches, which allow the surgeon to give a sufficient bone height for planning a rehabilitative treatment with implant at the required site. In this case the unilateral lifting of the maxillary sinus floor by buccal bone window, with subsequent implant placement and lyophilized human bone in a single surgical procedure.

scholarly journals Different Techniques For Sinus Floor Elevation: A Review Part II – Indirect Techniques

2021 ◽  
Vol 9 (1) ◽  
pp. 1-4
Author(s):  
Nitin Kothari ◽  
Vivek Jadhav ◽  
Snigdha Patil
Keyword(s):  
Minimally Invasive ◽  
Maxillary Sinus ◽  
Alveolar Bone ◽  
Effective Solution ◽  
Sinus Floor Elevation ◽  
Less Invasive ◽  
Implant Placement ◽  
Sinus Floor ◽  
Bone Height

The bone available for implant placement may be limited by the presence of the maxillary sinus togetherwith loss of alveolar bone height and it may be increased by augmentation. Minimally invasive sinusaugmentation is an effective solution for this problem. This review explains indirect sinus augmentationprocedures which are less invasive and highly successful if done using prescribed technique.

Soft-Tissue Enhancement Combined With Biologically Oriented Preparation Technique to Correct Volumetric Bone Defects: A Clinical Case Report

2017 ◽  
Vol 43 (4) ◽  
pp. 307-313 ◽  
Author(s):  
Davide Rancitelli ◽  
Pier Paolo Poli ◽  
Marco Cicciù ◽  
Francesco Lini ◽  
Rachele Roncucci ◽  
...  
Keyword(s):  
Case Report ◽  
Soft Tissue ◽  
Preparation Technique ◽  
Present Case Report ◽  
Sinus Floor Elevation ◽  
Implant Placement ◽  
Posterior Maxilla ◽  
Sinus Floor ◽  
And Function ◽  
Tissue Enhancement

The aim of the present case report was to illustrate how to obtain an ideal alveolar ridge contour by means of peri-implant soft-tissue management combined with the prosthetic approach of the biologically oriented preparation technique (BOPT). A patient presenting a moderate vertical and horizontal bone loss in the posterior maxilla was treated with sinus floor elevation and simultaneous implant placement. During the reentry procedure, the horizontal defect was corrected with an apically repositioned flap combined with a connective tissue graft. To increase the volume of the interimplant papillae, a pedunculated flap originating from the primary flap was turned within the interimplant space. BOPT one-time abutments have been employed to maximize the space available for the papilla-like tissues. A focused and combined surgical and prosthetic procedure has permitted enhancement of both peri-implant esthetics and function without the need for further invasive and costly bone regeneration techniques.

Sign in / Sign up

Export Citation Format

Share Document