scholarly journals The Effect of Surface Roughness on Diffusion and Chemical Reaction Controlled Limiting Currents on a Rotating Cylinder Electrode in Deaerated Solutions with and Without CO2

CORROSION ◽  
10.5006/2552 ◽  
2018 ◽  
Vol 74 (9) ◽  
pp. 971-983 ◽  
Author(s):  
M. Al-Khateeb ◽  
R. Barker ◽  
A. Neville ◽  
H.M. Thompson
Keyword(s):  
Mass Transfer ◽  
Surface Roughness ◽  
Sherwood Number ◽  
Schmidt Number ◽  
Rotating Cylinder ◽  
Operating Conditions ◽  
Limiting Current ◽  
Surface Roughening ◽  
Rotating Cylinder Electrode ◽  
Effect Of Surface

The influence of surface roughness on mass transfer on a rotating cylinder electrode apparatus is investigated experimentally for a roughness pattern consisting of grooves parallel to the direction of fluid flow. Mass transfer from four different samples, with roughness values of 0.5 μm, 6 μm, 20 μm, and 34 μm, is measured using the limiting current technique for a range of rotational speeds in NaCl solutions saturated with N2 at pH = 3 and 4. Comparison with available correlations for the Sherwood number in literature (which are independent of surface roughness and are either for specific or arbitrary roughness patterns) shows that H+ mass transfer only correlates well for particular levels of roughness and that their accuracy can be increased if a correlation is utilized which is a function of surface roughening. A new correlation for Sherwood number as a function of the Reynolds number, Schmidt number, and surface roughness is proposed which agrees well with the mass transfer observed from all of the rough surface cases considered for this particular roughness pattern. Complementary experiments in CO2 environments were used to assess the combined limiting current associated with H+ and H2CO3 reduction (with the latter occurring via the buffering effect and being associated with the slow CO2 hydration step). Although the increase in sample roughness clearly leads to an increase in the rate of H+ mass transfer, in the CO2 environments considered, surface roughness is found to have no significant influence on the limiting current contribution from H2CO3, which can therefore be determined from Vetter’s equation across this range of operating conditions.

The Effect of Surface Roughness on Efficiency of Low Pressure Turbines

2013 ◽  
Vol 136 (6) ◽  
Author(s):  
Raúl Vázquez ◽  
Diego Torre
Keyword(s):  
Surface Roughness ◽  
High Speed ◽  
Slope Angle ◽  
Low Pressure ◽  
Operating Conditions ◽  
Specific Work ◽  
Pressure Losses ◽  
Comparison Of The Results ◽  
Very High ◽  
Effect Of Surface

The effect of surface roughness on the efficiency of low pressure turbines (LPTs) was experimentally investigated in a multistage turbine high-speed rig. The rig consisted of three stages of a state-of-the-art LPT. The stages were characterized by a very high wall-slope angle, reverse cut-off design, very high lift, and very high aspect ratio airfoils. Two sets of airfoils (both stators and rotors) were tested. The first set was made of airfoils with a roughness size of 0.7 μm Ra (25–35 × 10−5 ks/Cm), which was representative of LPT polished airfoils. The surface finish for the second set of airfoils was 1.8 μm Ra for blades and 2.5 μm Ra for stators (approximately 90 × 10−5 in terms of ks/Cm for both stators and blades). The resulting roughness of this set was representative of “as-cast” airfoils of low pressure turbines. The airfoil geometries, velocity triangles, leading and trailing edge locations, and flowpath were maintained between both sets. They were tested with the same instrumentation and at the same operating conditions with the intention of determining the isolated impact of the surface roughness on the overall efficiency. The turbine characteristics: sensitivity to speed, specific work, Reynolds number, and purge flows, were obtained for both sets. The comparison of the results suggests that the efficiency and capacity of both types of airfoils exhibit the same behavior. No significant differences in the results can be distinguished for the range of operating conditions in this study. The results agree with previous studies of distributed roughness in turbines: the use of as-cast rough airfoils in some low pressure turbines at high altitude does not introduce additional pressure losses.

scholarly journals Ordinary Differential Equations Models for Observing the Phenomena of Temperature Changes on a Single Rectangular Plate Fin

2021 ◽  
Vol 8 (1) ◽  
pp. 89-94
Author(s):  
Arief Goeritno
Keyword(s):  
Mass Transfer ◽  
Blood Flow ◽  
Differential Equations ◽  
Ordinary Differential Equations ◽  
Sherwood Number ◽  
Schmidt Number ◽  
Capillary Tube ◽  
Slip Parameter ◽  
Thermal Buoyancy ◽  
Buoyancy Parameter

In this study, the heat and mass transfer of the blood flow, particularly in a capillary tube having a porous lumen and permeable wall in the presence of external magnetic field are considered. The velocity, temperature and concentration of blood flow become unsteady due to the time dependence of the stretching velocity, surface temperature and surface concentration. The thermal and mass buoyancy effect on blood flow, heat transfer and mass transfer are taken into account in the presence of thermal radiation. This analysis is very much useful in the treatment of cardiovascular disorders. The equations governing the flow under some assumptions are complex in nature, but capable of presenting the realistic model of blood flow using the theory of boundary layer approximation and similarity transformation. First, the system of coupled partial differential equations (PDEs) is converted into a system of coupled ordinary differential equations (ODEs). Then the solutions are obtained by Runge-Kutta method of 4thorder with shooting technique. The effects of various parameters such as Hartman number, radiation parameter, unsteadiness parameter, permeable parameter, thermal buoyancy parameter, Prandtl number, mass buoyancy parameter, velocity slip parameter, thermal slip parameter, Schmidt number on velocity, temperature, concentration, skin friction, Nusselt number and Sherwood number are depicted through graphs. Local Sherwood number enhances because of increase in Schmidt number. Moreover, some of the important results, which are discussed in the present study and have an impact on diseases like hyperthermia, stoke and moyamoya in human body.

scholarly journals Influence of Buoyant Forces on Magnetohydrodynamics (MHD) Blood Flow with an Interaction of Thermal Radiation

2021 ◽  
Vol 8 (1) ◽  
pp. 71-80
Author(s):  
Madhusudan Senapati ◽  
Sampada Kumar Parida
Keyword(s):  
Mass Transfer ◽  
Blood Flow ◽  
Differential Equations ◽  
Thermal Radiation ◽  
Sherwood Number ◽  
Schmidt Number ◽  
Capillary Tube ◽  
Slip Parameter ◽  
Thermal Buoyancy ◽  
Buoyancy Parameter

In this study, the heat and mass transfer of the blood flow, particularly in a capillary tube having a porous lumen and permeable wall in the presence of external magnetic field are considered. The velocity, temperature and concentration of blood flow become unsteady due to the time dependence of the stretching velocity, surface temperature and surface concentration. The thermal and mass buoyancy effect on blood flow, heat transfer and mass transfer are taken into account in the presence of thermal radiation. This analysis is very much useful in the treatment of cardiovascular disorders. The equations governing the flow under some assumptions are complex in nature, but capable of presenting the realistic model of blood flow using the theory of boundary layer approximation and similarity transformation. First, the system of coupled partial differential equations (PDEs) is converted into a system of coupled ordinary differential equations (ODEs). Then the solutions are obtained by Runge-Kutta method of 4thorder with shooting technique. The effects of various parameters such as Hartman number, radiation parameter, unsteadiness parameter, permeable parameter, thermal buoyancy parameter, Prandtl number, mass buoyancy parameter, velocity slip parameter, thermal slip parameter, Schmidt number on velocity, temperature, concentration, skin friction, Nusselt number and Sherwood number are depicted through graphs. Local Sherwood number enhances because of increase in Schmidt number. Moreover, some of the important results, which are discussed in the present study and have an impact on diseases like hyperthermia, stoke and moyamoya in human body.

Effect of surface roughness on the kinetics of mass transfer during gas carburizing*

2008 ◽  
Vol 63 (5) ◽  
pp. 257-264 ◽  
Author(s):  
O. Karabelchtchikova ◽  
Chr. A. Brown ◽  
R. D. Sisson
Keyword(s):  
Mass Transfer ◽  
Surface Roughness ◽  
Gas Carburizing ◽  
Kinetics Of ◽  
Effect Of Surface

Effect of Surface Roughness on Fouling of Calcium Carbonate: An Experimental Investigation

2010 ◽  
Author(s):  
M. Izadi ◽  
D. K. Aidun ◽  
P. Marzocca ◽  
H. Lee
Keyword(s):  
Surface Roughness ◽  
Calcium Carbonate ◽  
Rough Surface ◽  
Smooth Surface ◽  
Rough Surfaces ◽  
Operating Conditions ◽  
Tubular Heat Exchanger ◽  
Analytical Microscopy ◽  
Deposit Layer ◽  
Effect Of Surface

The effect of surface roughness on the fouling behavior of calcium carbonate is experimentally investigated. The real operating conditions of a tubular heat exchanger are simulated by performing prolonged experiments with duration of 3 to 7 days. The solution used is a mixture of sodium bicarbonate and calcium chloride in de-ionized water with the concentration of 0.4 g/l of each. An on-line fouling evaluation system was developed such that the fouling resistance for a selected solution could be measured in real time. The experiments are repeated with the same procedure for 90/10 Cu/Ni tubes with different internal surface roughness. After the experiment the surface is analyzed by analytical microscopy to investigate the morphology of the deposit layer. Comparison of the experimental results of smooth and rough surfaces shows that a combination of aragonite and calcite polymorphs are formed on rough surface while only dendritic porous aragonite crystals are formed on smooth surface. Accordingly, the deposit layer formed on rough surface is denser and has a higher thermal resistance comparing to that formed on smooth surface. The fouling factor-time curves of smooth and rough surfaces obtained by the current experimental study agree with the results found by the analytical microscopy of the surface and show higher fouling resistances for rough surface. Experimental data is significantly important for the design, and formulating operating, and cleaning schedules of the equipment.

Sign in / Sign up

Export Citation Format

Share Document