scholarly journals Volcanic forcing for climate modeling: a new microphysics-based dataset covering years 1600–present

2013 ◽  
Vol 9 (1) ◽  
pp. 967-1012 ◽  
Author(s):  
F. Arfeuille ◽  
D. Weisenstein ◽  
H. Mack ◽  
E. Rozanov ◽  
T. Peter ◽  
...  
Keyword(s):  
General Circulation ◽  
Climate Model ◽  
Climate Modeling ◽  
Circulation Model ◽  
Ice Cores ◽  
Volcanic Eruptions ◽  
Global Scale ◽  
Stratospheric Aerosol ◽  
Sulfate Aerosols ◽  
Volcanic Forcing

Abstract. As the understanding and representation of the impacts of volcanic eruptions on climate have improved in the last decades, uncertainties in the stratospheric aerosol forcing from large eruptions are now not only linked to visible optical depth estimates on a global scale but also to details on the size, latitude and altitude distributions of the stratospheric aerosols. Based on our understanding of these uncertainties, we propose a new model-based approach to generating a volcanic forcing for General-Circulation-Model (GCM) and Chemistry-Climate-Model (CCM) simulations. This new volcanic forcing, covering the 1600–present period, uses an aerosol microphysical model to provide a realistic, physically consistent treatment of the stratospheric sulfate aerosols. Twenty-six eruptions were modeled individually using the latest available ice cores aerosol mass estimates and historical data on the latitude and date of eruptions. The evolution of aerosol spatial and size distribution after the sulfur dioxide discharge are hence characterized for each volcanic eruption. Large variations are seen in hemispheric partitioning and size distributions in relation to location/date of eruptions and injected SO2 masses. Results for recent eruptions are in good agreement with observations. By providing accurate amplitude and spatial distributions of shortwave and longwave radiative perturbations by volcanic sulfate aerosols, we argue that this volcanic forcing may help refine the climate model responses to the large volcanic eruptions since 1600. The final dataset consists of 3-D values (with constant longitude) of spectrally resolved extinction coefficients, single scattering albedos and asymmetry factors calculated for different wavelength bands upon request. Surface area densities for heterogeneous chemistry are also provided.

scholarly journals Volcanic forcing for climate modeling: a new microphysics-based data set covering years 1600–present

2014 ◽  
Vol 10 (1) ◽  
pp. 359-375 ◽  
Author(s):  
F. Arfeuille ◽  
D. Weisenstein ◽  
H. Mack ◽  
E. Rozanov ◽  
T. Peter ◽  
...  
Keyword(s):  
General Circulation ◽  
Climate Model ◽  
Circulation Model ◽  
Ice Cores ◽  
Volcanic Eruptions ◽  
Global Scale ◽  
Stratospheric Aerosol ◽  
Set Covering ◽  
Data Set ◽  
Volcanic Forcing

Abstract. As the understanding and representation of the impacts of volcanic eruptions on climate have improved in the last decades, uncertainties in the stratospheric aerosol forcing from large eruptions are now linked not only to visible optical depth estimates on a global scale but also to details on the size, latitude and altitude distributions of the stratospheric aerosols. Based on our understanding of these uncertainties, we propose a new model-based approach to generating a volcanic forcing for general circulation model (GCM) and chemistry–climate model (CCM) simulations. This new volcanic forcing, covering the 1600–present period, uses an aerosol microphysical model to provide a realistic, physically consistent treatment of the stratospheric sulfate aerosols. Twenty-six eruptions were modeled individually using the latest available ice cores aerosol mass estimates and historical data on the latitude and date of eruptions. The evolution of aerosol spatial and size distribution after the sulfur dioxide discharge are hence characterized for each volcanic eruption. Large variations are seen in hemispheric partitioning and size distributions in relation to location/date of eruptions and injected SO2 masses. Results for recent eruptions show reasonable agreement with observations. By providing these new estimates of spatial distributions of shortwave and long-wave radiative perturbations, this volcanic forcing may help to better constrain the climate model responses to volcanic eruptions in the 1600–present period. The final data set consists of 3-D values (with constant longitude) of spectrally resolved extinction coefficients, single scattering albedos and asymmetry factors calculated for different wavelength bands upon request. Surface area densities for heterogeneous chemistry are also provided.

Volcanic forcing of climate since 1850 in an interactive aerosol-chemistry-climate model

2021 ◽  
Author(s):  
Thomas Aubry ◽  
Anja Schmidt ◽  
Alix Harrow ◽  
Jeremy Walton ◽  
Jane Mulcahy ◽  
...  
Keyword(s):  
Optical Properties ◽  
Radiative Forcing ◽  
Climate Models ◽  
Climate Model ◽  
Coupled Model ◽  
Ice Cores ◽  
Volcanic Eruptions ◽  
Stratospheric Aerosol ◽  
Aerosol Model ◽  
Volcanic Forcing

<p>Reconstructions of volcanic aerosol forcing and its climatic impacts are undermined by uncertainties in both the models used to build these reconstructions as well as the proxy and observational records used to constrain those models. Reducing these uncertainties has been a priority and in particular, several modelling groups have developed interactive stratospheric aerosol models. Provided with an initial volcanic injection of sulfur dioxide, these models can interactively simulate the life cycle and optical properties of sulfate aerosols, and their effects on climate. In contrast, most climate models that took part in the Coupled Model Intercomparison Project Phase 5 and 6 (CMIP6) directly prescribe perturbations in atmospheric optical properties associated with an eruption. However, before the satellite era, the volcanic forcing dataset used for CMIP6 mostly relies on a relatively simple aerosol model and a volcanic sulfur inventory derived from ice-cores, both of which have substantial associated uncertainties.</p><p>In this study, we produced a new set of historical simulations using the UK Earth System Model UKESM1, with interactive stratospheric aerosol capability (referred to as interactive runs hereafter) instead of directly prescribing the CMIP6 volcanic forcing dataset as was done for CMIP6 (standard runs, hereafter). We used one of the most recent volcanic sulfur inventories as input for the interactive runs, in which aerosol properties are consistent with the model chemistry, microphysics and atmospheric components. We analyzed how the stratospheric aerosol optical depth, the radiative forcing and the climate response to volcanic eruptions differed between interactive and standard runs, and how these compare to observations and proxy records. In particular, we investigate in detail the differences in the response to the large-magnitude Krakatoa 1883 eruption between the two sets of runs. We also discuss differences for the 1979-2015 period where the forcing data in standard runs is directly constrained from satellite observations. Our results shed new light on uncertainties affecting the reconstruction of past volcanic forcing and highlight some of the benefits and disadvantages of using interactive stratospheric aerosol capabilities instead of a unique prescribed volcanic forcing dataset in CMIP’s historical runs.</p>

scholarly journals The Model Intercomparison Project on the climatic response to Volcanic forcing (VolMIP): Experimental design and forcing input data

2016 ◽  
Author(s):  
Davide Zanchettin ◽  
Myriam Khodri ◽  
Claudia Timmreck ◽  
Matthew Toohey ◽  
Anja Schmidt ◽  
...  
Keyword(s):  
Climate Models ◽  
Climate Model ◽  
Initial Conditions ◽  
Volcanic Eruptions ◽  
Stratospheric Aerosol ◽  
Aerosol Layer ◽  
Model Intercomparison ◽  
Climatic Response ◽  
Volcanic Forcing ◽  
Intercomparison Project

Abstract. The enhancement of the stratospheric aerosol layer by volcanic eruptions induces a complex set of responses causing global and regional climate effects on a broad range of timescales. Uncertainties exist regarding the climatic response to strong volcanic forcing identified in coupled climate simulations that contributed to the fifth phase of the Climate Model Intercomparison Project (CMIP5). In order to better understand the sources of these model diversities, the model intercomparison project on the climate response to volcanic forcing (VolMIP) has defined a coordinated set of idealized volcanic perturbation experiments to be carried out in alignment with the CMIP6 protocol. VolMIP provides a common stratospheric aerosol dataset for each experiment to eliminate differences in the applied volcanic forcing, and defines a set of initial conditions to determine how internal climate variability contributes to determining the response. VolMIP will assess to what extent volcanically-forced responses of the coupled ocean-atmosphere system are robustly simulated by state-of-the-art coupled climate models and identify the causes that limit robust simulated behavior, especially differences in the treatment of physical processes. This paper illustrates the design of the idealized volcanic perturbation experiments in the VolMIP protocol and describes the common aerosol forcing input datasets to be used.

Modelling high-latitude explosive eruptions and their atmospheric and environmental impacts

2021 ◽  
Author(s):  
Herman Fuglestvedt ◽  
Zhihong Zhuo ◽  
Michael Sigl ◽  
Matthew Toohey ◽  
Michael Mills ◽  
...  
Keyword(s):  
Environmental Impacts ◽  
High Latitude ◽  
Radiative Forcing ◽  
General Circulation ◽  
Lower Thermosphere ◽  
Circulation Model ◽  
Ice Cores ◽  
Volcanic Eruptions ◽  
Explosive Eruptions ◽  
Sulphate Deposition

<p>Large explosive volcanic eruptions inject sulphur into the stratosphere where it is converted to sulphur dioxide and sulphate aerosols. Due to atmospheric circulation patterns, aerosols from high-latitude eruptions typically remain concentrated in the hemisphere in which they are injected. Eruptions in the high-latitude Northern Hemisphere could thus lead to a stronger hemispheric radiative forcing and surface climate response than tropical eruptions, a claim that is supported by a previous study based on proxy records and the coupled aerosol-general circulation model MAECHAM5-HAM. Additionally, the subsequent surface deposition of volcanic sulphate is potentially harmful to humans and ecosystems, and an improved understanding of the deposition over polar ice sheets can contribute to better reconstructions of historical volcanic forcing. On this basis, we model Icelandic explosive eruptions in a pre-industrial atmosphere, taking both volcanic sulphur and halogen loading into account. We use the fully coupled Earth system model CESM2 with the atmospheric component WACCM6, which extends to the lower thermosphere and has prognostic stratospheric aerosols and full chemistry. In order to study the volcanic impacts on the atmosphere, environment, and sulphate deposition, we vary eruption parameters such as sulphur and halogen loading, and injection altitude and season. The modelled volcanic sulphate deposition is compared to the deposition in ice cores following comparable historical eruptions. Furthermore, we evaluate the potential environmental impacts of sulphate deposition. To study inter-model differences, we also compare the CESM2-WACCM6 simulations to similar Icelandic eruption experiments simulated with MAECHAM5-HAM. </p>

scholarly journals Stratospheric aerosol evolution after Pinatubo simulated with a coupled size-resolved aerosol–chemistry–climate model, SOCOL-AERv1.0

2018 ◽  
Vol 11 (7) ◽  
pp. 2633-2647 ◽  
Author(s):  
Timofei Sukhodolov ◽  
Jian-Xiong Sheng ◽  
Aryeh Feinberg ◽  
Bei-Ping Luo ◽  
Thomas Peter ◽  
...  
Keyword(s):  
Climate Model ◽  
Reference Model ◽  
Volcanic Eruptions ◽  
Global Scale ◽  
Stratospheric Aerosol ◽  
Atmospheric Effects ◽  
Aerosol Layer ◽  
Aerosol Chemistry ◽  
Quasi Biennial Oscillation ◽  
Aerosol Parameters

Abstract. We evaluate how the coupled aerosol–chemistry–climate model SOCOL-AERv1.0 represents the influence of the 1991 eruption of Mt. Pinatubo on stratospheric aerosol properties and atmospheric state. The aerosol module is coupled to the radiative and chemical modules and includes comprehensive sulfur chemistry and microphysics, in which the particle size distribution is represented by 40 size bins with radii spanning from 0.39 nm to 3.2 µm. SOCOL-AER simulations are compared with satellite and in situ measurements of aerosol parameters, temperature reanalyses, and ozone observations. In addition to the reference model configuration, we performed series of sensitivity experiments looking at different processes affecting the aerosol layer. An accurate sedimentation scheme is found to be essential to prevent particles from diffusing too rapidly to high and low altitudes. The aerosol radiative feedback and the use of a nudged quasi-biennial oscillation help to keep aerosol in the tropics and significantly affect the evolution of the stratospheric aerosol burden, which improves the agreement with observed aerosol mass distributions. The inclusion of van der Waals forces in the particle coagulation scheme suggests improvements in particle effective radius, although other parameters (such as aerosol longevity) deteriorate. Modification of the Pinatubo sulfur emission rate also improves some aerosol parameters, while it worsens others compared to observations. Observations themselves are highly uncertain and render it difficult to conclusively judge the necessity of further model reconfiguration. The model revealed problems in reproducing aerosol sizes above 25 km and also in capturing certain features of the ozone response. Besides this, our results show that SOCOL-AER is capable of predicting the most important global-scale atmospheric effects following volcanic eruptions, which is also a prerequisite for an improved understanding of solar geoengineering effects from sulfur injections to the stratosphere.

scholarly journals Applying an isotope-enabled regional climate model over the Greenland ice sheet: effect of spatial resolution on model bias

2021 ◽  
Vol 17 (4) ◽  
pp. 1685-1699
Author(s):  
Marcus Breil ◽  
Emanuel Christner ◽  
Alexandre Cauquoin ◽  
Martin Werner ◽  
Melanie Karremann ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
General Circulation ◽  
Climate Model ◽  
Regional Climate ◽  
Circulation Model ◽  
Ice Cores ◽  
Arctic Region ◽  
The Arctic ◽  
Simulation Results ◽  
The Arctic Region

Abstract. In order to investigate the impact of spatial resolution on the discrepancy between simulated δ18O and observed δ18O in Greenland ice cores, regional climate simulations are performed with the isotope-enabled regional climate model (RCM) COSMO_iso. For this purpose, isotope-enabled general circulation model (GCM) simulations with the ECHAM5-wiso general circulation model (GCM) under present-day conditions and the MPI-ESM-wiso GCM under mid-Holocene conditions are dynamically downscaled with COSMO_iso for the Arctic region. The capability of COSMO_iso to reproduce observed isotopic ratios in Greenland ice cores for these two periods is investigated by comparing the simulation results to measured δ18O ratios from snow pit samples, Global Network of Isotopes in Precipitation (GNIP) stations and ice cores. To our knowledge, this is the first time that a mid-Holocene isotope-enabled RCM simulation is performed for the Arctic region. Under present-day conditions, a dynamical downscaling of ECHAM5-wiso (1.1∘×1.1∘) with COSMO_iso to a spatial resolution of 50 km improves the agreement with the measured δ18O ratios for 14 of 19 observational data sets. A further increase in the spatial resolution to 7 km does not yield substantial improvements except for the coastal areas with its complex terrain. For the mid-Holocene, a fully coupled MPI-ESM-wiso time slice simulation is downscaled with COSMO_iso to a spatial resolution of 50 km. In the mid-Holocene, MPI-ESM-wiso already agrees well with observations in Greenland and a downscaling with COSMO_iso does not further improve the model–data agreement. Despite this lack of improvement in model biases, the study shows that in both periods, observed δ18O values at measurement sites constitute isotope ratios which are mainly within the subgrid-scale variability of the global ECHAM5-wiso and MPI-ESM-wiso simulation results. The correct δ18O ratios are consequently not resolved in the GCM simulation results and need to be extracted by a refinement with an RCM. In this context, the RCM simulations provide a spatial δ18O distribution by which the effects of local uncertainties can be taken into account in the comparison between point measurements and model outputs. Thus, an isotope-enabled GCM–RCM model chain with realistically implemented fractionating processes constitutes a useful supplement to reconstruct regional paleo-climate conditions during the mid-Holocene in Greenland. Such model chains might also be applied to reveal the full potential of GCMs in other regions and climate periods, in which large deviations relative to observed isotope ratios are simulated.

scholarly journals The Sectional Stratospheric Sulfate Aerosol module S3A-v1 within the LMDZ general circulation model: Description and evaluation against stratospheric aerosol observations

2017 ◽  
Author(s):  
Christoph Kleinschmitt ◽  
Olivier Boucher ◽  
Slimane Bekki ◽  
François Lott ◽  
Ulrich Platt
Keyword(s):  
General Circulation ◽  
Circulation Model ◽  
Volcanic Eruptions ◽  
Stratospheric Aerosol ◽  
Climate Impacts ◽  
Model Description ◽  
Full Interaction ◽  
Microphysical Processes ◽  
Aerosol Module ◽  
Aerosol Radiative Effects

Abstract. Stratospheric aerosols play an important role in the climate system by affecting the Earth's radiative budget and the capabilities to simulate them interactively within global models are continuously improving. It is important to represent accurately both aerosol microphysical and atmospheric dynamical processes because together they affect the size distribution and the residence time of the aerosol particles in the stratosphere. The newly developed LMDZ-S3A model presented in this article uses a sectional approach for sulfate particles in the stratosphere and includes all the relevant microphysical processes, allowing full interaction between aerosol radiative effects and atmospheric dynamics. It reasonably reproduces aerosol observations in periods of low (background) and high (volcanic) stratospheric sulfate loading. Thus, it may serve as a tool to study the climate impacts of volcanic eruptions, as well as the deliberate anthropogenic injection of aerosols into the stratosphere, which has been proposed as a method of geoengineering to abate global warming.

Two Regimes of the Equatorial Warm Pool. Part II: Hybrid Coupled GCM Experiments

2008 ◽  
Vol 21 (14) ◽  
pp. 3545-3560 ◽  
Author(s):  
Masahiro Watanabe
Keyword(s):  
Simple Model ◽  
Indian Ocean ◽  
General Circulation ◽  
Climate Model ◽  
Climate Modeling ◽  
Circulation Model ◽  
Warm Pool ◽  
Bjerknes Feedback ◽  
The Pacific ◽  
The Indian Ocean

Abstract In this second of a two-part study, the two regimes in a simple tropical climate model identified in Part I are verified using a hybrid coupled general circulation model (HCM) that can reproduce the observed climatology and the interannual variability reasonably well. Defining a ratio of basin width between the Pacific and Indian Oceans, a series of parameter sweep experiments was conducted with idealized tropical land geometry. Consistent with the simple model, the HCM simulates two distinct states: the split warm pool regime with large vacillation between the two ocean basins and the single warm pool regime representing current climate. The former is suddenly switched to the latter as the Pacific becomes wider than the Indian Ocean. Furthermore, the vacillation in the split regime reveals a preferred transition route that the warm phase in the Pacific follows that in the Indian Ocean. This route occurs due to convectively coupled Kelvin waves that accompany precipitation anomalies over land. Additional experiments show that the inclusion of the idealized Eurasian continent stabilizes the split regime by reducing the Bjerknes feedback in the Indian Ocean, suggesting the atmosphere–ocean–land interaction at work in maintaining the observed warm pool. No difference in cloud feedback was found between two regimes; this feature may, however, be model dependent. Both the simple model and the HCM results suggest that the tropical atmosphere–ocean system inherently involves multiple solutions, which may have an implication on climate modeling as well as on the understanding of the observed mean climate.

scholarly journals Reconstructing glacier-based climates of LGM Europe and Russia – Part 2: A dataset of LGM climates derived from degree-day modelling of palaeo glaciers

2007 ◽  
Vol 3 (5) ◽  
pp. 1167-1198 ◽  
Author(s):  
R. Allen ◽  
M. J. Siegert ◽  
A. J. Payne
Keyword(s):  
General Circulation ◽  
Climate Model ◽  
Eastern Mediterranean ◽  
Circulation Model ◽  
Global Scale ◽  
The Arctic ◽  
Climate Signal ◽  
Geological Evidence ◽  
Climate Conditions ◽  
Continental Scale

Abstract. The study of European and Russian Quaternary glacial-geological evidence during the last 15 years has generated sufficient to data to use former glacial extent as a proxy for Last Glacial Maximum (LGM) climate at a continental scale. Utilisation of such data is relevant for two reasons. First, continental to global scale proxy reconstructions of past climate are an important tool in the assessment of retrospective general circulation model (GCM) simulations. Second, the development of a multi-proxy approach will result in a more robust proxy based climate signal. A new and independent dataset of 36 LGM climate estimates derived from European and Russian mountain regions is presented in this paper. A simple glacier-climate model was used to establish the optimum LGM climate conditions for each region from a suite of over 4000 model climates using the principle of zero cumulative mass balance. Clear regional trends are present in the reconstructed LGM climates; temperature anomalies north of the Alps are 2°C and 5°C larger than those in the western and eastern Mediterranean, respectively. In Russia the model results suggest that both the Arctic Urals and Puterana Plateau were probably glaciated by small mountain glaciers during the LGM.

scholarly journals Assessing the consequences of including aerosol absorption in potential Stratospheric Aerosol Injection Climate Intervention Strategies

2022 ◽  
Author(s):  
Jim Haywood ◽  
Andy Jones ◽  
Ben Johnson ◽  
William McFarlane Smith
Keyword(s):  
Climate Model ◽  
Stratospheric Ozone ◽  
Volcanic Eruptions ◽  
Global Scale ◽  
Stratospheric Aerosol ◽  
Moderate Degree ◽  
Quasi Biennial Oscillation ◽  
Aerosol Absorption ◽  
Climate Model Simulations ◽  
Absorbing Aerosols

Abstract. Theoretical Stratospheric Aerosol Intervention (SAI) strategies model the deliberate injection of aerosols or their precursors into the stratosphere thereby reflecting incident sunlight back to space and counterbalancing a fraction of the warming due to increased concentrations of greenhouse gases. This cooling mechanism is known to be relatively robust through analogues from explosive volcanic eruptions which have been documented to cool the climate of the Earth. However, a practical difficulty of SAI strategies is how to deliver the injection high enough to ensure dispersal of the aerosol within the stratosphere on a global scale. Recently, it has been suggested that including a small amount of absorbing material in a dedicated 10-day intensive deployment might enable aerosols or precursor gases to be injected at significantly lower, more technologically-feasible altitudes. The material then absorbs sunlight causing a localised heating and ‘lofting’ of the particles, enabling them to penetrate into the stratosphere. Such self-lofting has recently been observed following the intensive wildfires in 2019–2020 in south east Australia, where the resulting absorbing aerosol penetrated into the stratosphere and was monitored by satellite instrumentation for many months subsequent to emission. This study uses the fully coupled UKESM1 climate model simulations performed for the Geoengineering Model Intercomparison Project (GeoMIP) and new simulations where the aerosol optical properties have been adjusted to include a moderate degree of absorption. The results indicate that partially absorbing aerosols i) reduce the cooling efficiency per unit mass of aerosol injected, ii) increase deficits in global precipitation iii) delay the recovery of the stratospheric ozone hole, iv) disrupt the Quasi Biennial Oscillation when global mean temperatures are reduced by as little as 0.1 K, v) enhance the positive phase of the wintertime North Atlantic Oscillation which is associated with floods in Northern Europe and droughts in Southern Europe. While these results are dependent upon the exact details of the injection strategies and our simulations use ten times the ratio of black carbon to sulfate that is considered in the recent intensive deployment studies, they demonstrate some of the potential pitfalls of injecting an absorbing aerosol into the stratosphere to combat the global warming problem.

Sign in / Sign up

Export Citation Format

Share Document