Evaluation of multiple soil moisture products using in-situ observations over China

2021 ◽  
Author(s):  
Huiqing Li ◽  
Aizhong Ye ◽  
Yuhang Zhang ◽  
Wenwu Zhao
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Yellow River ◽  
Eastern China ◽  
Land Surface Model ◽  
Spatial And Temporal Variation ◽  
Surface Model ◽  
Drought Assessment ◽  
In Situ Observations

<p>Soil moisture (SM), a vital variable in the climate system, is applied in many fields. But the existing SM data sets from different sources have great uncertainty, hence need comprehensive verification. In this study, we collected and evaluated ten latest commonly used SM products over China, including four reanalysis data (ERA-Interim, ERA5, NCEP R2 and CFSR/CFSV2), three land surface model products (GLDAS 2.1 Noah, CLSM and VIC) and three remote sensing products (ESA CCI ACTIVE, COMBINED and PASSIVE). These products in their overlap period (2000-2018) were inter-compared in spatial and temporal variation. In addition, their accuracy was verified by a large quantity of in-situ observations. The results show that the ten SM products have roughly similar spatial patterns and small inter-annual differences, but there are still some deviations varying in regions and products. ERA5 displays the most encouraging overall performance in China. The estimates of SM in the northwest of China among all products generally perform poorly on capturing in-situ SM variability due to less coverage of observations. CLSM and ERA5 have a satisfactory correlation coefficient with the observed SM (R>0.7) in the northeast and south of China, respectively. ESA CCI ACTIVE performs with the optimal mean Equitable Threat Score (ETS) value, which indicates the promising ability to drought assessment, followed by CFSR/CFSV2 and ERA5. Specifically, ESA CCI ACTIVE expresses higher ETS in the Yellow River Basin, while CFSR/CFSV2 and ERA5 are more applicable in most areas of the eastern China. This study provides a reasonable reference for the application of SM products in China.</p>

scholarly journals ERA-5 and ERA-Interim driven ISBA land surface model simulations: which one performs better?

2018 ◽  
Vol 22 (6) ◽  
pp. 3515-3532 ◽  
Author(s):  
Clement Albergel ◽  
Emanuel Dutra ◽  
Simon Munier ◽  
Jean-Christophe Calvet ◽  
Joaquin Munoz-Sabater ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Land Surface ◽  
Snow Depth ◽  
Land Surface Model ◽  
Surface Model ◽  
Area Index ◽  
Model Simulations ◽  
In Situ Observations

Abstract. The European Centre for Medium-Range Weather Forecasts (ECMWF) recently released the first 7-year segment of its latest atmospheric reanalysis: ERA-5 over the period 2010–2016. ERA-5 has important changes relative to the former ERA-Interim atmospheric reanalysis including higher spatial and temporal resolutions as well as a more recent model and data assimilation system. ERA-5 is foreseen to replace ERA-Interim reanalysis and one of the main goals of this study is to assess whether ERA-5 can enhance the simulation performances with respect to ERA-Interim when it is used to force a land surface model (LSM). To that end, both ERA-5 and ERA-Interim are used to force the ISBA (Interactions between Soil, Biosphere, and Atmosphere) LSM fully coupled with the Total Runoff Integrating Pathways (TRIP) scheme adapted for the CNRM (Centre National de Recherches Météorologiques) continental hydrological system within the SURFEX (SURFace Externalisée) modelling platform of Météo-France. Simulations cover the 2010–2016 period at half a degree spatial resolution. The ERA-5 impact on ISBA LSM relative to ERA-Interim is evaluated using remote sensing and in situ observations covering a substantial part of the land surface storage and fluxes over the continental US domain. The remote sensing observations include (i) satellite-driven model estimates of land evapotranspiration, (ii) upscaled ground-based observations of gross primary production, (iii) satellite-derived estimates of surface soil moisture and (iv) satellite-derived estimates of leaf area index (LAI). The in situ observations cover (i) soil moisture, (ii) turbulent heat fluxes, (iii) river discharges and (iv) snow depth. ERA-5 leads to a consistent improvement over ERA-Interim as verified by the use of these eight independent observations of different land status and of the model simulations forced by ERA-5 when compared with ERA-Interim. This is particularly evident for the land surface variables linked to the terrestrial hydrological cycle, while variables linked to vegetation are less impacted. Results also indicate that while precipitation provides, to a large extent, improvements in surface fields (e.g. large improvement in the representation of river discharge and snow depth), the other atmospheric variables play an important role, contributing to the overall improvements. These results highlight the importance of enhanced meteorological forcing quality provided by the new ERA-5 reanalysis, which will pave the way for a new generation of land-surface developments and applications.

scholarly journals Evaluation of a multi-satellite soil moisture product and the Community Land Model 4.5 simulation in China

2015 ◽  
Vol 12 (5) ◽  
pp. 5151-5186 ◽  
Author(s):  
B. Jia ◽  
J. Liu ◽  
Z. Xie
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Surface Soil ◽  
Eastern China ◽  
Surface Model ◽  
Surface Soil Moisture ◽  
Community Land Model ◽  
Soil Moisture Data ◽  
In Situ Observations

Abstract. Twenty years of in situ soil moisture data from more than 300 stations located in China are used to perform an evaluation of two surface soil moisture datasets: a microwave-based multi-satellite product (ECV-SM) and the land surface model simulation from the Community Land Model 4.5 (CLM4.5). Both soil moisture products generally show a good agreement with in situ observations. The ECV-SM product has a low bias, with a root mean square difference (RMSD) of 0.075 m3 m-3, but shows a weak correlation with in situ observations (R = 0.41). In contrast, the CLM4.5 simulation, forced by an observation-based atmospheric forcing data, produces better temporal variation of surface soil moisture (R = 0.52), but shows a clear overestimation (bias = 0.05 m3 m-3) and larger RMSD (0.09 m3 m-3), especially in eastern China, caused by inaccurate descriptions of soil characteristics. The ECV-SM product is more likely to be superior in semi-arid regions, mainly because of the accurate retrievals and high observation density, but inferior over areas covered by dense vegetation. Furthermore, it shows a stable to slightly increasing performance in China, except for a decrease during the 2007–2010 blending period. Results from this study can provide comprehensive insight into the performances of the two soil moisture datasets in China, which will be useful for their improvements in merging algorithms or model simulations and for applications in soil moisture data assimilation.

scholarly journals ERA-5 and ERA-Interim driven ISBA land surface model simulations: Which one performs better?

2018 ◽  
Author(s):  
Clement Albergel ◽  
Emanuel Dutra ◽  
Simon Munier ◽  
Jean-Christophe Calvet ◽  
Joaquin Munoz-Sabater ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Land Surface ◽  
Snow Depth ◽  
Land Surface Model ◽  
Surface Model ◽  
Area Index ◽  
Model Simulations ◽  
In Situ Observations

Abstract. The European Centre for Medium Range Weather Forecast (ECMWF) recently released a first 7-year segment of its latest atmospheric reanalysis: ERA-5 over 2010–2016. ERA-5 important changes relative to ERA-Interim former atmospheric reanalysis include a higher spatial and temporal resolution as well as a more recent model and data assimilation system. ERA-5 is foreseen to replace ERA-Interim reanalysis and one of the main goals of this study is to assess whether ERA5 can enhance the simulation performances with respect to ERA-Interim when it is used to force a Land-Surface-Model (LSM). To that end, both ERA-5 and ERA-Interim are used to force the ISBA (Interactions between Soil, Biosphere, and Atmosphere) LSM fully coupled with the Total Runoff Integrating Pathways (TRIP) scheme adapted for the CNRM (Centre National de Recherches Météorologiques) continental hydrological system within the SURFEX (SURFace Externalisée) modelling platform of Météo-France. Simulations cover the 2010–2016 period at half a degree spatial resolution. ERA-5 impact on the ISBA LSM with respect to ERA-Interim is assessed over a data-rich area: North America. A comprehensive evaluation of ERA-5 impact is conducted using remote sensing and in-situ observations covering a substantial part of the land surface storage and fluxes. The remote sensing observations include: (i) satellite-driven model estimates of land evapotranspiration, (ii) upscaled ground-based observations of gross primary productivity, (iii) satellite derived estimates of surface soil moisture as well as (iv) satellite derived estimates of Leaf Area Index. The in-situ observations cover (i) soil moisture, (ii) turbulent heat fluxes and Net Ecosystem Exchange (NEE), (iii) river discharges and (iv) snow depth. ERA-5 leads to a consistent improvement over ERA-Interim as verified with the use of these 8 independent observations of different land status and of the model simulations forced by ERA-5 when compared with ERAInterim.. This is particularly evident for the land surface variables linked to the terrestrial hydrological cycle while variables linked to vegetation are less impacted. Results also indicate that while precipitation provides, to a large extend, improvements in surface fields (e.g. large improvement in the representation of river discharge and snow depth), the other atmospheric variables play an important role, contributing to the overall improvements. These results highlight the importance of enhanced meteorological forcing quality provided by the new ERA-5 reanalysis, which will pave the way for a new generation of land-surface developments and applications.

scholarly journals Deriving surface soil moisture from reflected GNSS signal observations from a grassland site in southwestern France

2017 ◽  
Author(s):  
Sibo Zhang ◽  
Jean-Christophe Calvet ◽  
José Darrozes ◽  
Nicolas Roussel ◽  
Frédéric Frappart ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Land Surface Model ◽  
Ground Surface ◽  
Satellite System ◽  
Surface Model ◽  
Global Navigation Satellite ◽  
Grassland Site

Abstract. This work aims to assess the estimation of surface volumetric soil moisture (VSM) using the Global Navigation Satellite System Interferometric Reflectometry (GNSS-IR) technique. Year-round observations were acquired from a grassland site in southwestern France using an antenna consecutively placed at two contrasting heights above the ground surface (3.3 or 29.4 m). The VSM retrievals are compared with two independent reference datasets: in situ observations of soil moisture, and numerical simulations of soil moisture and vegetation biomass from the ISBA (Interactions between Soil, Biosphere and Atmosphere) land surface model. Scaled VSM estimates can be retrieved throughout the year removing vegetation effects by the separation of growth and senescence periods and by the filtering of the GNSS-IR observations that are most affected by vegetation. Antenna height has no significant impact on the quality of VSM estimates. Comparisons between the VSM GNSS-IR retrievals and the in situ VSM observations at a depth of 5 cm show a good agreement (R2 = 0.86 and RMSE = 0.04 m3 m−3). It is shown that the signal is sensitive to the grass litter water content and that this effect triggers differences between VSM retrievals and in situ VSM observations at depths of 1 cm and 5 cm, especially during light rainfall events.

scholarly journals SMOS Neural Network Soil Moisture Data Assimilation in a Land Surface Model and Atmospheric Impact

2019 ◽  
Author(s):  
Nemesio Rodriguez-Fernandez ◽  
Patricia de Rosnay ◽  
Clement Albergel ◽  
Philippe Richaume ◽  
Filipe Aires ◽  
...  
Keyword(s):  
Neural Network ◽  
Soil Moisture ◽  
Data Assimilation ◽  
Land Surface ◽  
Positive Impact ◽  
Land Surface Model ◽  
Surface Model ◽  
Northern Asia ◽  
The Impact

The assimilation of Soil Moisture and Ocean Salinity (SMOS) data into the ECMWF (European Centre for Medium Range Weather Forecasts) H-TESSEL (Hydrology revised - Tiled ECMWF Scheme for Surface Exchanges over Land) model is presented. SMOS soil moisture (SM) estimates have been produced specifically by training a neural network with SMOS brightness temperatures as input and H-TESSEL model SM simulations as reference. This can help the assimilation of SMOS information in several ways: (1) the neural network soil moisture (NNSM) data have a similar climatology to the model, (2) no global bias is present with respect to the model even if regional differences can exist. Experiments performing joint data assimilation (DA) of NNSM, 2 metre air temperature and relative humidity or NNSM-only DA are discussed. The resulting SM was evaluated against a large number of in situ measurements of SM obtaining similar results to those of the model with no assimilation, even if significant differences were found from site to site. In addition, atmospheric forecasts initialized with H-TESSEL runs (without DA) or with the analysed SM were compared to measure of the impact of the satellite information. Although, NNSM DA has an overall neutral impact in the forecast in the Tropics, a significant positive impact was found in other areas and periods, especially in regions with limited in situ information. The joint NNSM, T2m and RH2m DA improves the forecast for all the seasons in the Southern Hemisphere. The impact is mostly due to T2m and RH2m, but SMOS NN DA alone also improves the forecast in July- September. In the Northern Hemisphere, the joint NNSM, T2m and RH2m DA improves the forecast in April-September, while NNSM alone has a significant positive effect in July-September. Furthermore, forecasting skill maps show that SMOS NNSM improves the forecast in North America and in Northern Asia for up to 72 hours lead time.

Towards an operationally capable satellite-based 0-100 cm soil moisture dataset from C3S

2021 ◽  
Author(s):  
Adam Pasik ◽  
Wolfgang Preimesberger ◽  
Bernhard Bauer-Marschallinger ◽  
Wouter Dorigo
Keyword(s):  
Soil Moisture ◽  
Soil Profile ◽  
Land Surface ◽  
Root Zone ◽  
Soil Layer ◽  
Land Surface Model ◽  
In Situ Measurements ◽  
Surface Model ◽  
T Values

<p>Multiple satellite-based global surface soil moisture (SSM) datasets are presently available, these however, address exclusively the top layer of the soil (0-5cm). Meanwhile, root-zone soil moisture cannot be directly quantified with remote sensing but can be estimated from SSM using a land surface model. Alternatively, soil water index (SWI; calculated from SSM as a function of time needed for infiltration) can be used as a simple approximation of root-zone conditions. SWI is a proxy for deeper layers of the soil profile which control evapotranspiration, and is hence especially important for studying hydrological processes over vegetation-covered areas and meteorological modelling.</p><p>Here we introduce the advances in our work on the first operationally capable SWI-based root-zone soil moisture dataset from C3S Soil Moisture v201912 COMBINED product, spanning the period 2002-2020. The uniqueness of this dataset lies in the fact that T-values (temporal lengths ruling the infiltration) characteristic of SWI were translated into particular soil depths making it much more intuitive, user-friendly and easily applicable. Available are volumetric soil moisture values for the top 1 m of the soil profile at 10 cm intervals, where the optimal T-value (T-best) for each soil layer is selected based on a range of correlation metrics with in situ measurements from the International Soil Moisture Network (ISMN) and the relevant soil and climatic parameters.<br>Additionally we present the results of an extensive global validation against in situ measurements (ISMN) as well as the results of investigations into the relationship between a range of soil and climate characteristics and the optimal T-values for particular soil depths.</p>

Comparing Assimilation of Soil Moisture and C-band Backscatter in High Resolution Land Surface Model

2020 ◽  
Author(s):  
Leqiang Sun ◽  
Stéphane Belair ◽  
Marco Carrera ◽  
Bernard Bilodeau
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Land Surface Model ◽  
Open Loop ◽  
In Situ Measurements ◽  
Lookup Table ◽  
Surface Model ◽  
Loop Model ◽  
The Impact

<p>Canadian Space Agency (CSA) has recently started receiving and processing the images from the recently launched C-band RADARSAT Constellation Mission (RCM). The backscatter and soil moisture retrievals products from the previously launched RADARSAT-2 agree well with both in-situ measurements and surface soil moisture modeled with land surface model Soil, Vegetation, and Snow (SVS). RCM will provide those products at an even better spatial coverage and temporal resolution. In preparation of the potential operational application of RCM products in Canadian Meteorological Center (CMC), this paper presents the scenarios of assimilating either soil moisture retrieval or outright backscatter signal in a 100-meter resolution version of the Canadian Land Data Assimilation System (CaLDAS) on field scale with time interval of three hours. The soil moisture retrieval map was synthesized by extrapolating the regression relationship between in-situ measurements and open loop model output based on soil texture lookup table. Based on this, the backscatter map was then generated with the surface roughness retrieved from RADARSAT-2 images using a modified Integral Equation Model (IEM) model. Bias correction was applied to the Ensemble Kalman filter (EnKF) to mitigate the impact of nonlinear errors introduced by multi-sourced perturbations. Initial results show that the assimilation of backscatter is as effective as assimilating soil moisture retrievals. Compared to open loop, both can improve the analysis of surface moisture, particularly in terms of reducing bias.  </p>

The Contributions of Gauge-Based Precipitation and SMAP Brightness Temperature Observations to the Skill of the SMAP Level-4 Soil Moisture Product

2020 ◽  
Author(s):  
Rolf H. Reichle ◽  
Qing Liu ◽  
Joseph V. Ardizzone ◽  
Wade T. Crow ◽  
Gabrielle J. M. De Lannoy ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Brightness Temperature ◽  
Land Surface ◽  
Root Zone ◽  
Land Surface Model ◽  
Surface Model ◽  
Meteorological Forcing ◽  
Earth Observing System ◽  
Error Surface

AbstractSoil Moisture Active Passive (SMAP) mission L-band brightness temperature (Tb) observations are routinely assimilated into the Catchment land surface model to generate Level-4 Soil Moisture (L4_SM) estimates of global surface and root-zone soil moisture at 9-km, 3-hourly resolution with ~2.5-day latency. The Catchment model in the L4_SM algorithm is driven with ¼-degree, hourly surface meteorological forcing data from the Goddard Earth Observing System (GEOS). Outside of Africa and the high latitudes, GEOS precipitation is corrected using Climate Prediction Center Unified (CPCU) gauge-based, ½-degree, daily precipitation. L4_SM soil moisture was previously shown to improve over land model-only estimates that use CPCU precipitation but no Tb assimilation (CPCU_SIM). Here, we additionally examine the skill of model-only (CTRL) and Tb assimilation-only (SMAP_DA) estimates derived without CPCU precipitation. Soil moisture is assessed versus in situ measurements in well-instrumented regions and globally through the Instrumental Variable (IV) method using independent soil moisture retrievals from the Advanced Scatterometer. At the in situ locations, SMAP_DA and CPCU_SIM have comparable soil moisture skill improvements relative to CTRL for the unbiased root-mean-square error (surface and root-zone) and correlation metrics (root-zone only). In the global average, SMAP Tb assimilation increases the surface soil moisture anomaly correlation by 0.10-0.11 compared to an increase of 0.02-0.03 from the CPCU-based precipitation corrections. The contrast is particularly strong in central Australia, where CPCU is known to have errors and observation-minus-forecast Tb residuals are larger when CPCU precipitation is used. Validation versus streamflow measurements in the contiguous U.S. reveals that CPCU precipitation provides most of the skill gained in L4_SM runoff estimates over CTRL.

scholarly journals Assimilation of SMOS brightness temperature into a large-scale distributed conceptual hydrological model

2019 ◽  
Author(s):  
Renaud Hostache ◽  
Dominik Rains ◽  
Kaniska Mallick ◽  
Marco Chini ◽  
Ramona Pelich ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Brightness Temperature ◽  
Land Surface ◽  
Large Scale ◽  
Hydrological Model ◽  
Land Surface Model ◽  
Surface Model ◽  
Meteorological Model ◽  
Temperature Observations

Abstract. The main objective of this study is to investigate how brightness temperature observations from satellite microwave sensors may help in reducing errors and uncertainties in soil moisture simulations with a large-scale conceptual hydro-meteorological model. In particular, we use as forcings the ERA-Interim public dataset and we couple the CMEM radiative transfer model with a hydro-meteorological model enabling therefore soil moisture and SMOS-like brightness temperature simulations. The hydro-meteorological model is configured using recent developments of the SUPERFLEX framework, which enables tailoring the model structure to the specific needs of the application as well as to data availability and computational requirements. In this case, the model spatial resolution is adapted to the spatial grid of the satellite data, and the soil stratification is tailored to the satellite datasets to be assimilated and the forcing data. The hydrological model is first calibrated using a sample of SMOS brightness temperature observations (period 2010–2011). Next, SMOS-derived brightness temperature observations are sequentially assimilated into the coupled SUPERFLEX-CMEM model (period 2010–2015). For this experiment, a Local Ensemble Transform Kalman Filter is used and the meteorological forcings (ERA interim-based rainfall, air and soil temperature) are perturbed to generate a background ensemble. Each time a SMOS observation is available, the SUPERFLEX state variables related to the water content in the various soil layers are updated and the model simulations are resumed until the next SMOS observation becomes available. Our empirical results show that the SUPERFLEX-CMEM modelling chain is capable of predicting soil moisture at a performance level similar to that obtained for the same study area and with a quasi-identical experimental set up using the CLM land surface model. This shows that a simple model, when carefully calibrated, can yield performance level similar to that of a much more complex model. The correlation between simulated and in situ observed soil moisture ranges from 0.62 to 0.72. The assimilation of SMOS brightness temperature observation into the SUPERFLEX-CMEM modelling chain improves the correlation between predicted and in situ observed soil moisture by 0.03 on average showing improvements similar to those obtained using the CLM land surface model.

Sign in / Sign up

Export Citation Format

Share Document